CHEMICAL AND MINERALOGICAL ANALYSES OF GALLO-ROMAN WALL PAINTING FROM DIETIKON,SWITZERLAND

Around 90 samples of Roman wall painting dating from the first to the third century AD were analysed using different analytical techniques: X-ray diffraction, X-ray fluorescence, infrared spectrometry, scanning electron microscopy, energy dispersive spectrometry, optical microscopy and physico-chemical tests. The identified pigments are: ash, calcite, carbon black, celadonite, cinnabar, Egyptian Blue, glauconite, goethite, hematite and red lead. Pigment mixtures were used to get other colours such as brown, pink or purple. Three types of plaster were used: a first, and most dominant, with river sand, a second with crushed tile for damp places and a third, to which cinnabar was exclusively applied, was prepared with crushed calcite crystals.     

PRE-COLUMBIAN METALLURGY: TECHNOLOGY,MANUFACTURE, AND MICROPROBE ANALYSES OF COPPER BELLS FROM THE GREATER SOUTHWEST*

Twenty-four cast copper crotals (commonly called bells), one 'spilled bell’, one tinkler bell and a number of minerals from locations throughout the Greater Southwest were analysed for their elemental composition by a PIXE nuclear microprobe at Los Alamos National Laboratory, New Mexico, USA. Sixteen bells contained minor and trace amounts of silver, antimony, arsenic, lead, and in some cases tin, strontium, and selenium. Nine bells contained little or no detectable amounts of these elements. This suggests that several workshops throughout the Greater Southwest and Mexico might have manufactured these bells.     

STATISTICAL ANALYSIS OF CHEMICAL COMPOSITIONAL DATA AND THE COMPARISON OF ANALYSES

Recent statistical work on approaches to analysing compositional data - where variables sum to a constant for each row of a data matrix - may encounter difficulties when applied to data of the kind typically arising in scientific archaeology. The reason is that results obtained may be unsatisfactory from a substantive viewpoint for identifiable technical reasons. This paper explores and illustrates some possible resolutions of the problem. A feature of the approach used is to analyse subsets of the variables on separate scales. A synthesis of the results obtained from separate analyses is essential and the use of multiple correspondence analysis for this purpose is illustrated.     

INVESTIGATION ON ROMAN LEAD GLAZE FROM CANOSA: RESULTS OF CHEMICAL ANALYSES*

Five sherds of green glazed pottery excavated at Canosa (Apulia) in Italy have been analysed by scanning electron microscopy. The aim of the investigation was to determine the chemical composition of the glazes and thus obtain information on the methods used in their production. The glazes were all of the high‐lead type, coloured green by the addition of copper. Intermediate layers, observed at the interface between the glaze and body and giving the appearance of an applied white slip, were the result of the crystallization of lead feldspar from the molten glaze. Non‐calcareous clays were used in the production of the pottery bodies. Concentration profiles from the glaze exterior to the body suggested that the glazes were produced by applying a suspension consisting of lead oxide plus silica to the bodies. On the basis of the glaze and body compositions, it is suggested that the Canosa glazed pottery was produced locally.     

CHEMICAL AND PHYSICAL CHARACTERIZATION OF STUCCOS FROM A MEXICAN COLONIAL BUILDING: EL MUSEO DEL CALENDARIO OF QUERETARO*

Restoration requires the use of appropriate characterization methods and suitable new material preparation processes permit the reproduction of the original material to be as similar as possible in order to be an appropriate application method. The combination of these factors will facilitate a good restoration process. Different stuccos were taken from El Museo del Calendario, a building located in Querétaro, Mexico which was built in the 16th century. All the stucco samples were studied using the characterization process which is proposed in this article. The characterization method consisted of the use of analytical techniques, such as X‐ray diffraction, Fourier transform infrared and scanning electron microscopy. This characterization method made reproduction of the original material possible. The new material combined with new application techniques developed in situ will result in a high‐quality restoration process.     

CHEMICAL AND LEAD ISOTOPE ANALYSES OF GREEK LATE NEOLITHIC AND EARLY BRONZE AGE METALS

Results of a combined archaeological and analytical project of Late Neolithic/Early Bronze Age copper, bronze and lead artefacts from four distinct areas of mainland Greece are presented. The aim of the study is to understand better the stages of technological development of each region, their possible ore sources and also to assess any external contribution to or internal evolution of their metallurgy. Interesting results which could challenge the established view of Late Neolithic/Early Bronze Age metallurgy in the Greek mainland are presented.     

DISCRIMINANT ANALYSIS OF THE CHEMICAL COMPOSITIONS AND PHYSICAL MEASUREMENTS OF 245 AUGUSTAN QUADRANTES

Previously 245 Augustan quadrantes were analysed for seven elements. Physical measurements comprised the weight, maximum thickness and diameter, minimum diameter, and die orientation for each coin. Both chemical and physical data were subjected to discriminant analysis, and centroids in multi-dimensional space were obtained for each of the four groups. A tetrahedron was drawn using the four centroids; each corner was separated from the other groups by a Mahalanobis distance. We hypothesize that the most probable relative chronology comprises the smallest sum of Mahalanobis distances connecting all four points. The most probable chronology for the quadrantes is c. 8, 9, 5, and 4 B.C.     

UNOFFICIAL COINAGE IN THE THIRD CENTURY ad IN THE GALLO‐ROMAN WORLD: CHEMICAL AND PHYSICAL ANALYSES FOR DETERMINING THE LOCALIZATION OF THE WORKSHOP*

The third century ad was a complex period of crisis in the Roman world. In this paper, official and unofficial antoniniani, and double sestercii and sestercii, were analysed by fast neutron activation analysis (FNAA) to determine the alloys used by the craftsmen for producing forgeries. Moreover, at Châteaubleau, archaeologists discovered antoniniani and bronze forgeries from Postumus. Similar materials have been found in other hoards. They are believed to have been produced by a workshop called ‘atelier II’ by numismatists. The question was whether it is possible to differentiate the Châteaubleau production from the atelier II production.     

THE CHEMICAL COMPOSITION OF SOME ARCHAEOLOGICALLY SIGNIFICANT FLINT FROM DENMARK AND SWEDEN

Flint was one of the most widely employed raw materials for artefact manufacture in Denmark and Sweden during the Stone Age, and it continued to be used during subsequent periods. Prehistoric flint mining and lithic manufacturing studies in these countries have attracted considerable attention, but there have been no recent attempts to chemically characterize the geological source materials. This paper builds on a pilot study ( Hughes et al. 2010 ) and uses energy‐dispersive X‐ray fluorescence (EDXRF) analysis to determine quantitative composition estimates for nine major, minor and certain trace elements in seven archaeologically significant flint sources in Denmark and Sweden, along with new data on a number of other sources of prehistoric significance. These data provide a geochemical foundation for ongoing research devoted to determining contrasts and continuities in the time and space utilization of flint sources in Scandinavian prehistory.     

DNA AND PROTEIN RECOVERY FROM WASHED EXPERIMENTAL STONE TOOLS*

Traces of protein and DNA are preserved on stone tools used to process animals. Previous research documents the identification of protein residues from tools sonicated in 5% ammonium hydroxide, but it remains untested whether the same treatment yields useable DNA. In this study we report both DNA and protein recovery using 5% ammonium hydroxide from residues on stone tools. We extracted 13‐year‐old residues from experimentally manufactured stone tools used to butcher a single animal. We also show that surface washing procedures typically used to curate stone tools remove only a small fraction of the DNA and protein deposited during animal butchery.     

LASER ARGON DATING AND GEOLOGICAL PROVENANCING OF A STONE AXE FROM THE STONEHENGE ENVIRONS*

The recently-developed laser microprobe ⁴⁰argon-³⁹ argon technique has been used to give a geological date for a rhyolitic tuff stone axe fragment from the Stonehenge environs. The method requires only milligramme-sized samples and gives dates of sufficient accuracy to aid in provenancing artefacts to sources, as well as information on the heating history of samples. The axe sample is of Lower Carboniferous date (341 ± 5 Ma) and this limits possible sources to outcrops within the Scottish Midland Valley and small altered exposures in Dartmoor. X-ray fluorescence analysis of the axe suggests the Scottish Midland Valley as the more likely source. The laser argon analysis also shows that the implement had not been heated in antiquity. Laser argon-argon dating can, therefore, be a useful tool in artefact study.     

东亚经济危机与东亚发展模式新探

本文从三个方面论述了东亚经济发展模式。首先,从历史的角度分析了东亚经济发展模式的产生、特点及其局限性。然后,进一步指出在经济全球化和信息化加速发展新的历史条件下,东亚发展模式已不能适应时代发展的要求,东亚发展模式与这次东亚经济危机存在着内在的必然的联系。最后,对东亚经济发展模式的发展与变革提出了自己的观点。     

A FUNCTIONAL ANALYSIS OF MISSISSIPPIAN CERAMIC VESSELS FROM TOWN CREEK

Abstract

Vessel shape, size, and use-alterations are used to identify vessel types and vessel functions among Mississippian ceramics from the Town Creek site in central North Carolina. Possible functions are discussed for vessel types, and broad distinctions are made regarding vessels that possibly were used for cooking, serving and eating, or storage. The composition of the overall vessel assemblage at Town Creek indicates that it is generally comparable with other Mississippian assemblages. A consideration of the distribution of vessel types by context allows some insights into the association of different activities with different parts of the Mississippian community at Town Creek, namely, that the mound area was associated with distinctive vessel assemblages.     

CHEMICAL ANALYSES OF GLASS BEADS FOUND IN TWO SARMATIAN BURIALS*

The chemical compositions of 14 glass beads from two Early Sarmatian-period burials were determined. Al, Ca, Fe, Mg, K, Na, and Si were measured by electron probe microbeam analysis, while the Co, Cu, Ga, Mn, Ni, Pb, Rb, Sr, Th, Ti, Y, Zn, and Zr contents were measured using energy dispersive X-ray fluorescence. All the beads can be classed as low-magnesia soda-lime-silica glasses. The blue glass beads examined in this study were coloured with Co and Cu containing minerals. Cluster analysis and principal components analysis suggest that two distinct glass recipes were used to manufacture these beads.     

ANALYSIS OF FIRST MILLENNIUM bc GLASS VESSELS AND BEADS FROM THE PICHVNARI NECROPOLIS,GEORGIA*

The Pichvnari necropolis on the Black Sea coast of Georgia lies in an area known in the late first millennium as ‘Colchis’, on part of the trade route leading to the Orient. The burials of the necropolis date to the late fifth century bc and frequently contain grave goods, including extremely well‐preserved polychrome glass beads and core‐formed vessels. This paper presents a study of these vessels both stylistically and archaeologically and using SEM–WDS and LA–ICPMS. It reveals that the vessels have compositional differences that may point to multiple manufacturing sites. One of the vessels appears stylistically unique and may exhibit one of the earliest uses of manganese as a decolorizer. Major and minor element data for the vessels suggest that they may belong to the same ‘Levantine’ group as many Roman glass objects, suggesting that a source of sand on the coast of the Levant could have been used in their production. The beads clearly show glass with both natron‐ and plant ash‐based flux with distinct rare earth compositions, showing multiple sites of production, some of which were probably either in the Middle East or the Indian subcontinent.     

MICROCHEMICAL CHARACTERIZATION OF BUILDING STONE FROM SEVILLE CATHEDRAL,SPAIN

Enrichment diagrams for trace elements have been proposed as a useful and straightforward procedure to identify ores and stones. The identification of the diverse stone of the exterior of the Cathedral of Seville has been achieved by this means. Fourteen trace elements have been analysed, from both quarry and building material samples, using atomic absorption and flame emission spectrometry in order to apply enrichment diagrams for identification purposes.