Firing Techniques of the Impasti from the Protohistoric Site of Concordia Sagittaria (Venice)

⁵⁷Fe Mössbauer spectroscopy provided relevant information on the firing techniques employed in manufacturing concotto and coarse pottery, two types of fired clay mixtures (impasti) of the protohistoric settlement site of Concordia Sagittaria. The firing techniques of Concordia were reconstructed by comparing the Mössbauer patterns of the artefacts with those of the local raw clays fired in the laboratory. The concotto was produced in kilns by firing clay mixtures under oxidizing conditions at 700–1000°C, or at lower temperatures in the open air. The firing of these clay mixtures containing mainly ground pieces of waste pottery, resulted in hard and variously coloured construction materials, particularly suitable for humid environments. In turn, the coarse pottery was produced by firing clay mixtures more homogeneous than those used for the artefacts of concotto. The firing of coarse pottery was performed under reducing conditions at about 900°C with a final exposure to air by opening the hot kiln. Light and agreeable coarse pottery, with a red surface on the grey-black core, was obtained when the effective temperature of air was higher than 500°C.     

Unglazed pottery from the masjed-i jom’e of Isfahan (Iran): technology and provenance

The masjed-i jom’e of Isfahan is one of the earliest mosques of Iran. Since 1970, Italian researchers performed an extensive archaeological investigation uncovering huge amounts of finds. This study aims at investigating the technological features and provenance of the unglazed pottery finds by using a minero-petrographic approach. Twenty-three samples of storage, table and cooking wares were selected based on the recurrence of typologically identifiable fragments and fabrics. Two bricks, seven production indicators (spacers, kiln furniture, slags) and a local clay were analysed for comparison. The production indicators and most of the pottery show high-CaO concentration. Thick-walled wares contain coarse sedimentary/metamorphic inclusions. Samples with thinner walls contain similar but fine/well-sorted inclusions. The mineralogy and microstructure indicate firing temperatures mainly ranging from 850 to 1000 °C. Low-CaO samples contain coarse sedimentary inclusions; in one sample, volcanic lithics are present. Firing temperatures range from about 800 to 950 °C, and the low-CaO character can be related to their specific function for cooking foods. One sample, found in older stratigraphic levels, differs for its peculiar calcitic temper and lower firing temperature. Local production of most samples was constrained by the composition of the inclusions compatible with the sediments of the Isfahan area. High-CaO pottery shows compositional affinity with production indicators, local clay and tiles produced in Isfahan during the Safavid period. Cooking ware usually contains local temper, with the exception of a sample with volcanic inclusions, for which a non-local provenance is supposed. No appropriate information is, however, available regarding the low-CaO clays used in the area.     

Lipid Residues from Low‐Fired Pottery

This paper assesses the fate of lipids associated with low‐temperature and pit‐fired pottery to determine to what degree organic compounds persist or are removed during short‐firing episodes below 800 °C. Three different types of clay were fired using contrasting techniques including at 400 °C for 4 h in a muffle furnace, and pit‐firing in which pottery was fired to higher temperatures but for shorter periods of time. Total lipid extracts obtained by solvent extraction of test sherds were screened using gas chromatography‐flame ionization detection (GC‐FID) to determine the lipid concentrations and gas chromatography–mass spectrometry (GC–MS) to identify the organic compounds present. The results showed that firing of clay removes all naturally occurring alkyl lipids; however, during pit‐firing, diterpenoid lipids were introduced into the clay as a condensate from pine ( Pinus spp.) wood used as fuel. These results confirm that alkyl lipids, e.g., fatty acids, can be reliably associated with the use of vessels, although caution is required when interpreting the origins of lipids that might derive from fuel used in firing.     

Minero-petrographic characterization of fine ware from Cales (South Italy)

79 samples of black glazed pottery, Terra sigillata, fine common ware, and production indicators were recovered in the archaeological site of Cales and investigated via a multi-analytical program (polarized light microscopy, thermal analyses, XRPD, XRF, FESEM, FESEM-EDS). Among the materials, finds of important production indicators, represented by welded pieces of black glazed pottery and spacers, attest a local production. Polarized light microscopy shows that the inclusions consist of feldspar, quartz, mica, calcite, and lithic fragments of both volcanic and sedimentary nature. Additional information about the mineralogical assemblage comes from the XRPD that revealed the presence of neoformed Ca-silicates, indicating equivalent firing temperatures ranging from 750 to 1050°C. All the samples show a Ca-rich character and an extreme compositional homogeneity, including the production indicators. The comparison with some Ca-rich Campanian clay raw materials shows a greater affinity with the Mio-Pliocene marine clay sediments of the Apennine sector, which include local clays. This allowed us to formulate the first hypotheses about clay sources used to produce fine pottery during the third century BCE to the early imperial period in Cales.     

A NOTE ON THE DIFFERENTIAL THERMAL ANALYSIS OF ARCHAEOLOGICAL CERAMICS

Evidence is presented that the clay in ancient ware fired at a temperature below 700–800°C becomes rehydrated over the millennia, such that it behaves somewhat like an unfired clay, rendering DTA a useful tool in identifying the clay minerals present. More recent samples can be artificially rehydrated by heating in a steam autoclave.     

MINERO‐PETROGRAPHIC STUDY OF COOKING WARE AND POMPEIAN RED WARE (ROSSO POMPEIANO) FROM CUMA (SOUTHERN ITALY)

Excavations carried out in Cuma by the Centre Jean Bérard archaeologists have uncovered a large quantity of pottery. This study is focused on cooking ware and on internal red‐slip cookware, also known as Pompeian Red Ware (Rosso Pompeiano), dated from the first century bc to the first century ad . A comparison with the minero‐petrographic composition of beach sands collected along the Bay of Naples coastline highlights the provenance of the temper from the Somma‐Vesuvius area, marked by leucite‐bearing scoriae and garnet. Petrochemical analyses allow us to distinguish two main groups of pottery characterized by different technological options based on the amount of temper and on the type of clay. X‐ray diffraction and scanning electron microscope data demonstrate improved accuracy in the production of Rosso Pompeiano, especially with regard to firing control, which was in a prevailing oxidizing atmosphere and in a narrow thermal range, between about 800 and 900°C.     

Archaeometric study of medieval pottery excavated at Stari (Old) Ras,Serbia

A combined study of a series of polychromatic and monochromatic glazed medieval pottery shards excavated from the archaeological area of Stari (Old) Ras in southern Serbia, including petrographic and chemical analysis, powder X-ray diffraction (PXRD) and Fourier transform infrared (FTIR) spectroscopy, allowed us to clearly distinguish between two groups of ceramics. Ras pottery, made of fine-grained well-cleaned clay and characterised by a rich mineral assemblage, was produced by firing in a temperature range between 800 and 900 °C. Reljina Gradina ceramics were produced at similar temperatures from materials which, with regard to mineralogical and chemical composition, show clear similarity with local clay, suggesting that these samples are of local origin and production. This work is the first systematic archaeometric study of medieval pottery excavated on the territory of Serbia.     

Technological aspects of Mesopotamian Uruk pottery: estimating firing temperatures using mineralogical methods,thermal analysis and luminescence techniques

The Middle Uruk phase in Mesopotamia (3600–3500 bc) has been characterised by the massive production of “bevelled rim bowls” (BRBs). They are characterised by their similar shape and volume in Mesopotamia and surroundings. However, their production method has not been studied in detail, including the firing temperature. The determination of the firing temperature of ancient pottery has been attempted by studying mineral phase transformation sequences; although, very little knowledge exists about such transformations in mixtures or thermal analyses. These methods usually provide imprecise firing temperatures between 500 and 800 °C, as other factors such as the raw materials or firing time and conditions must be considered. As an alternative, luminescence techniques have been tested with promising results, as they have provided reliable maximum firing temperatures for ancient pottery at mild conditions (below 600 °C) with high precision. In this work, the firing temperatures of BRB samples from two archaeological sites located in the Middle Euphrates Valley (Syria) have been studied using mineralogical, chemical and thermal analysis. Both mineral characterization techniques and thermal analyses show agreement and firing probably below 600–700 °C. Luminescence yields ambiguous results but circumstantial evidence on the firing temperature between 400 and 550 °C.     

利用同墓葬出土泥芯、陶器示踪青同器铸造地初探 一以湖北襄樊部分东周墓为例

为研究出土墓葬青铜器铸造地,利用X射线荧光光谱法对湖北襄樊的余岗、沈岗、团山、陈坡四处墓地出土的部分青铜器泥芯、陶片进行测试分析,试验结果与山西侯马、武汉盘龙城遗址进行比较分析。对比研究显示,襄樊地区泥芯与当地墓土、陶片在常量元素上具有高度一致性,而与黄河流域的侯马和长江中下游的盘龙城有明显区别,说明襄樊地区这部分铜器应为本地铸造,暗示江汉流域存在自己特有文化。本项研究工作首次尝试利用同墓葬陶器化学成分探索青铜器铸造地,是泥芯研究青铜器铸造地的重要补充,泥芯和陶器相互配合,为青铜器铸造地研究提供了一种新思路。     

Archaeometric Investigation of Medieval Pottery from Excavations at Novo Brdo,Serbia

Medieval pottery from excavations at Novo Brdo, Serbia, an important mining and trading centre during the 14th and 15th centuries, was investigated by a combination of optical microscopy, inductively coupled plasma – optical emission spectrometry, Fourier transform infrared, micro‐Raman and energy‐dispersive X‐ray fluorescence spectroscopy and X‐ray powder diffraction methods in order to determine its composition and firing temperature. The samples investigated were made of medium‐ to coarse‐grained, non‐calcareous clay, by a relatively well‐controlled firing procedure in an oxidizing atmosphere. The firing temperature was estimated to be 850–950°C. The similarity between the chemical composition of the investigated pottery and the local raw clay, combined with the outward appearance and the archaeological findings, indicate domestic production. The pottery is covered with the transparent lead‐rich glaze. Iron and copper were used as colourants.     

Technological examination of Neolithic-Bronze Age pottery from central and southeast Europe and from the Near East

Scanning electron microscopy is used to examine sequences of pottery sherds from central and southeast Europe, Greece and the Near East spanning the period from the Neolithic to the Bronze Age, in order to obtain information on the ceramic technologies employed in antiquity. On the basis of the vitrification observed and the chemical composition, the types of clay and firing procedures (temperature and atmosphere) employed in the manufacture of the pottery are defined. Two under-lying trends in the associated ceramic technologies are thus identified. The first is based on the use of non-calcareous or “unstable” calcareous clays fired in a reducing atmosphere at temperatures below 800 °C and the second on the use of “stable” calcareous clays fired in an oxidizing atmosphere at temperatures in excess of 800 °C.     

Ancient Egyptian Pottery from the Subsurface Floodplain of the Saqqara–Memphis Area: Its Mineralogical and Geochemical Implications*

Potsherds recovered from the Saqqara–Memphis floodplain in Egypt, dated according to their typology and radiocarbon dating of the included sediments, are analysed geochemically and mineralogically to identify source materials and fabrication characteristics. Pottery layers were identified and potsherds were recovered from several settlement levels. Sherd typology was used to identify sherds from four periods (the Old and New Kingdoms, and from the Late Period to the Ptolemaic). The Pharaonic pieces were found at depths of between 8 and 12 m and the later material was between 6 and 3 m. Chemical analyses of the potsherds revealed three main source materials: local Nile silt, marl clay and mixed Nile silt–marl. Two marl clay types were recognized: marl clay from Upper Cretaceous marine sediment and another one from Late Pliocene deltaic sediments. The mineralogical composition of the pottery samples shows that the estimated firing temperature was about 850–900°C. No consistent differences in sherd mineralogy and geochemistry were found according to pottery types, so that the ancient Egyptian potters used essentially the same materials throughout the Pharaonic period. However, this initial study has revealed the existence of extensive pottery‐rich occupation sites buried within the Nile floodplain deposits between Memphis and Saqqara.     

MINERALOGICAL INVESTIGATIONS OF MEDIEVAL BRICK SAMPLES FROM BÉKÉS COUNTY (SE HUNGARY)

Brick samples from nine archaeological sites representing seven contemporary medieval settlements in Békés County (SE Hungary) were analysed by quantitative X‐ray powder diffraction, optical microscopic, scanning electron microscopic and coupled thermal analytical – evolved gas analytical methods. The aims of this study were to give a mineralogical–petrographical characterization of the brick samples, to gain possible information on the raw clay and the admixed materials, and to determine the firing techniques applied in medieval southeastern Hungary. The mineralogical composition of the samples suggests that the locally extracted clay was mixed with fluvial sand and wheat (Triticum monococcum L.) chaff. The moulded bricks were fired in clamps. The different degrees of calcite consumption suggest that the firing temperature ranged from ～750°C to ～950°C. Moreover, the well‐developed reaction coronas on calcite grains indicate long firing times, lasting perhaps several days.     

CHEMICAL–MINERALOGICAL ANALYSES AND MICROSTRUCTURAL STUDIES OF PREHISTORIC POTTERY FROM RAHMATABAD,SOUTH‐WEST IRAN*

A series of prehistoric pottery samples excavated from Rahmatabad, south‐west Iran, were investigated using XRF and XRD analyses to determine their chemical and mineralogical compositions. The sample microstructures were also studied by SEM/EDX. The relative similarity of compositions, the fine, dense and homogeneous microstructures and the presence of high‐temperature phases such as diopside and mullite showed the use of high firing temperatures, in the range 950–1050°C. This, along with the homogeneity in shape, decoration and size ranges of the ware, all indicate the adoption of specialized pottery‐making techniques by the potters of Rahmatabad in the fifth to fourth millennia bc .     

Diatoms as indicators of provenance in Finnish sub-neolithic pottery

The clays of Finland originated from glacial deposits formed during the deglaciation of the Weichselian ice-sheet and during the different stages of the Baltic Sea. The analysis of the fossil diatom flora is of central importance in the study of its developmental history. The diatoms in the clay indicate its sedimentary environment, which can be linked to the stages of the Baltic Sea. The siliceous valves of diatoms tolerate heating up to 1400°C and can consequently be identified in ceramics fired at lower temperatures. Several diatom analyses have been made in Finnish Sub-Neolithic comb ware pottery in order to determinate the origin of their clay materials. According to the results of these studies, prehistoric potteries used clays deposited during the Yoldia and the Ancylus stages. The criteria used in selecting raw materials were identical to those of modern ceramic industries. Further details as to provenance of clay materials have been illustrated in connection with research on pottery from the Aland Islands. In the example from Kymi, South-eastern Finland, changes in the composition of the diatom flora have been found to correlate with changes in pottery decoration styles.     

Leftovers: The presence of manufacture-derived aquatic lipids in Alaskan pottery

Lipids preserved within the walls of ancient pottery vessels are routinely analysed to reveal their original contents. The provenience of aquatic lipids in pottery is generally connected to vessel function (e.g., for cooking or storing fish, shellfish and aquatic mammals). However, ethnographic reports from early historic Alaska mention the use of aquatic oils for waterproofing low-fired pottery. Results of lipid residue studies on Alaskan pottery reflect an exclusive function of pottery to process aquatic resources. However, can one be sure these residues are the product of vessel function and not a remnant of the manufacturing process? The study presents the results of an experiment where the preservation of aquatic lipids during the firing process at different temperatures was measured. It was found that nearly all lipids were removed at firing temperatures of ≥ 400°C. Petrographic analysis of Alaskan pottery samples indicates that firing temperatures were generally > 550°C but < 800°C. The contribution of pre-firing manufacture-derived lipids to samples fired at these temperatures may be regarded as negligible. While the possible presence of aquatic lipids from post-firing surface treatments cannot be excluded, such treatments appear unnecessary for well-fired pottery.     

苏家村遗址烧土样品的过火温度研究

烧土制品作为最早的人工建筑材料,使人类的居住环境得到了根本性的改善。然而,学界关于烧土建筑的成因存在人为烘烤处理、缘自火焚、废弃习俗等多种观点。通过科技手段研究烧土制品的过火温度,有助于科学分析烧土建筑的成因,探讨与之相关的建筑工艺,丰富史前建筑史研究。磁学研究表明,考古遗址中的土壤及其他沉积物在受热后新生成了磁铁矿、磁赤铁矿等强磁性矿物导致磁性显著增强,且矿物成分和磁性几乎不会再发生变化;但当重烧的温度接近或大于原始烧成温度时,样品中原始矿物的破坏或新矿物的生成,会引起矿物磁性的改变。基于这一原理,实验室内分析受热黏土的磁化率随再加热温度的变化特征,可反映烧土制品的过火温度。苏家村遗址是大汶口文化晚期至龙山文化中期早段一处重要的聚落遗址,遗址中第5层为厚约20～40 cm的红烧土层且覆盖整个遗址,推测为房屋倒塌造成的建筑垃圾堆积层或人为堆积层,出土大量烧土块。本研究利用X射线衍射分析法、X射线荧光光谱分析法和磁化率法等对苏家村遗址出土的烧土样品开展了组成及构造特征和样品的过火温度的综合分析。结果表明,苏家村遗址烧土样品中的白灰层中人为地添加了白色陶土原料,土层中有意地添加了植物残骸作...     

Firing temperature of a clay core sample in a bronze tripod from Daxinzhuang Site in China using TL techniques

In this paper, we studied the thermal history of a clay core sample from one leg of a bronze tripod unearthed at Daxinzhuang Site, Shandong, China. The properties of the luminescence signals of quartz depend on the maximum temperature at which the quartz was annealed in the past. We examined the feasibility of measuring the thermoluminescence (TL) sensitivity change of quartz for exploring the firing temperature of archaeological materials. The sensitization factor of the 110°C TL peak (S₂/S₁) and the ratio of the 210°C TL peak to the 110°C TL peak at different annealing temperatures were utilized to unveil the firing temperature in the clay core sample. The firing temperature of the clay core sample was approximately 700°C–800°C, proving the clay core has been fired. This result proved that the clay core has been fired by human agencies and indicated on the temperature of the clay core in drying and firing given by the foundry workers before the actual casting step.     

The Mineralogical Characteristics of the Lamboglia 2 Roman‐Age Amphorae from the Central Adriatic (Croatia)*

The mineralogical characteristics of four Lamboglia 2 Roman‐age amphorae excavated from ancient underwater shipwreck localities in the central Adriatic were investigated. X‐ray diffraction and optical microscopy analyses showed that the amphorae have similar primary mineral compositions, mainly consisting of quartz, plagioclase, potassium feldspar, diopside, illite and calcite, most probably originating from clayey Eocene flysch deposits used as raw materials in manufacture. The difference in mineral composition between these samples is recognized from the presence or absence of melilite, high‐magnesium calcite, aragonite, gypsum and analcime. It was shown that melilite is a secondary mineral formed during the firing process, while the others, which build up through incrustation of marine benthonic communities on the amphora walls and fill the cracks in the amphora bodies, were formed by crystallization in seawater. The firing of the original pieces of amphorae showed that melilite could be formed at temperatures higher than 800°C, most probably through interaction between calcite and silicate minerals present in the raw materials. The presence of melilite, and the absence of illite and calcite, were used to estimate the firing temperature of the amphorae during their production.     

The process,location, and history of Hohokam Buff ware production: some experimental and analytical results

A distinctive red-on-buff pottery, found throughout central and southern Arizona, is a hallmark of prehistoric Hohokam culture. To manufacture it, Hohokam potters used a complicated recipe and controls for firing to chemically manipulate their clay and produce a light-colored fabric on which to paint their red designs. In this study, firing experiments and ceramic analysis are used in conjunction with excavation evidence to evaluate competing ideas about the buff ware manufacturing process, investigate where the pots were made, and model the developmental history of red-on-buff production.