Hazor rulership and ritual manipulation

ABSTRACT

Hazor was unquestionably the largest Bronze Age Canaanite site, standing as an anomaly in the southern Levant in terms of its size, elaborate public architecture, special geopolitical stature and far-reaching international networks. While the site has been well established as an urban center with many temples, the use of each of Hazor’s temples and how they relate to one another remains unclear. In this study, we analyze the rituals and other activities that were conducted within Hazor’s numerous temples. The methodology we employ stresses, fundamentally, the necessity to contextualize objects within entire assemblages – through spatial analysis – to most accurately assess how Hazor’s cultic spaces were actually used. We apply the same methodology to other MB and LB Canaanite temples to establish a generalized ideal-type temple assemblage for Canaanite temples. This study successfully demonstrates that Hazor’s temples substantially diverge from the ideal temple assemblage, indicating cult at Hazor was practiced differently than elsewhere in the region. This includes the atypical distribution of certain cultic vessels (e.g. miniature vessels), the appearance of special vessels in ritual contexts (e.g. cups), and a fundamentally different use of indoor and outdoor spaces when compared to other Canaanite temples. It turns out that Hazor’s elites were major factors controlling the anomalies of cultic practice at the site. Hazor’s rulers impacted cultic architectural forms and locations and played instrumental roles in dictating and manipulating the types of rituals and associated cultic paraphernalia that were allowed to be performed and used throughout the entire settlement landscape.     

First discovery of ancient soft‐stone (chlorite) vessel production in Arabia: Aqir al‐Shamoos (Oman)

Soft‐stone vessels are a prominent feature of ancient culture throughout south‐east Arabia and the Gulf. Chlorite and steatite occur naturally in the al‐Hajar Mountains of the United Arab Emirates (UAE) and Oman; but until now, apart from the discovery of a few unfinished pieces, ancient production of soft‐stone vessels had yet to be documented in Arabia. This paper reports the discovery and preliminary analysis of soft‐stone vessel production at the site of Aqir al‐Shamoos. At this small and secluded mountain village, a range of soft‐stone vessels that are well known in the south‐east Arabian Iron Age were produced on a scale far beyond what was needed for local consumption.     

随仲嬭加鼎的时代特征及其他

随仲嬭加鼎的发现具有重要意义,但其非考古发掘品,需要考察其制作年代。在楚系青铜器大背景下,本文通过对该鼎器形、纹饰、铭文以及工艺等时代特征的观察,并对比分析相关楚系青铜器,认为该鼎制作年代在春秋中期无疑。     

'.. Slaying oxen and Killing Sheep,Eating Flesh and Drinking Wine ..': Feasting in Late Bronze Age Hazor

Abstract

Communal feasts, events of ritual activity that involve shared food and drink consumption and display in religious and secular elite contexts, received considerable attention in anthropological and archaeological literature in recent years. In those studies, the focus was on the identification of feasting in the material record of ancient societies, and an attempt was made to decipher the complex social and political meanings inherent in such contexts. In this study, the aim is to identify and interpret traces of feasting activities in the context of Canaanite society of the 14th–13th century BCE. The site of Hazor, the largest Canaanite kingdom, serves as a case study for this discussion. Archaeological correlates of commensal feasts, uncovered in the extensive excavations of the site, are presented and discussed within the general picture of the Canaanite palatial system.     

ABUSE,REUSE, RECYCLE: THE USES OF BASALT ORTHOSTATS AT HAZOR IN THE BRONZE AND IRON AGES

This paper investigates the use of basalt orthostats in Syro‐Anatolia throughout the Bronze and Iron Ages, focusing on the changes in their consumption at Hazor. Used to reflect the wealth and power of city rulers in the Middle and Late Bronze Ages, this practice continued in the Iron Age in Syro‐Anatolia, while at Hazor it stopped entirely. By applying the modern concepts of counter‐monumentality and spolia, it is suggested that, at Hazor, the orthostats were used by the Iron Age inhabitants of the city to glorify the destruction of the Late Bronze Age city and to humiliate the previous royalty of Hazor, thus exhibiting their victory over its Canaanite rulers.     

THE LION ORTHOSTATS FROM HAZOR: AN ADDENDUM TO THE PAPER OF SHLOMIT BECHAR

In a paper recently published in this journal, Shlomit Bechar (2021) analyzed the appearance and use of basalt orthostats in Canaanite and Israelite Hazor. The present paper is an addendum to Bechar's paper, elaborating the subject of the basalt lion orthostats found at Hazor. These lion orthostats formed an inseparable component of the ‘orthostats architecture’ characteristic of several monumental buildings in the Canaanite city. The paper discusses their original position, date, style, function, and fate following the destruction of the city.     

Unfinished and Paired Logboats from Bavaria, Germany

Though Bavaria is far inland, at least 20 logboats are known, but only recently have some been properly recorded. This paper deals with two vessels discovered in the early 1990s. The remains at Laufen-Pfaffing represent a semi-manufactured logboat, which was purposely sunk as was the custom in Austria until the mid-20th century. The vessel from Wessobrunn-Blaik is also unfinished and shows several tool-marks. It is too narrow to float on its own: therefore it is part of a paired logboat. There is plenty of archaeological evidence for this kind of craft, but no ethnographic evidence. Apart from use as ferries, other uses are discussed.
© 2005 The Nautical Archaeology Society     

A New View of the ‘Edesö Wreck’: identifying the Swedish naval vessel Bodekull,built 1659–1661 and sunk 1678 from written sources

This article complements the archaeological account of the so‐called ‘Edesö Wreck’ with archival research that has led to its identification. In 1659 the Swedish King Karl X Gustav ordered a number of vessels for transport of horses and soldiers while at war with Denmark. The king died just a few months later, the war with Denmark was aborted, and the unfinished vessels were rebuilt to serve other purposes. One of these was Bodekull, built under English master shipwright Thomas Day between 1659 and 1661. In October 1678 Bodekull sank in the Stockholm archipelago. Alterations made during construction mentioned in written sources have been noted on the wreck and strengthen the argument for the identification.     

Investigation on the Yinjiawopu Site,a Medieval Salt Production Workshop in Northeast China

In 2014 and 2015, the Research Center for Chinese Frontier Archaeology at Jilin University and the Jilin Province Archaeological Research Institute jointly conducted two excavations at the Yinjiawopu Site, in Da’an City, Jilin Province, Northeast China. One burial, two canals, five leaching pits, two house-foundations, four hearths, 103 pits, two ditches, and over 800 pieces of artifacts dated from the 12th to the 13th centuries a.d. (the Liao-Jin period) were found. Analysis shows that these features belong to a salt production workshop. This study marks the first discovery of a salt production site in Northeast China. The archaeological, ethnographic, and historical materials from the site allow a reconstruction of the chaîne opératoire of salt-making by the inhabitants of the Northeast China Plain during this period. This study sheds light on the exchange and control of salt, on the activities and daily life of the inhabitants of the region, and on their relationship with the environment.     

Archaeomagnetic versus luminescence methods: the case of an Early Byzantine ceramic workshop in Thessaloniki,Greece

In this contribution, we present a combined archaeomagnetic and luminescence study of archaeologically dated structures. The investigated area is a ceramic workshop comprising several Early Byzantine kilns. Based on (a) the archaeological–anthropogenic stratigraphy of the site, (b) the structural characteristics of the kilns and (c) the few ceramic findings revealed within their context, the operation of this brick and tile factory is approximately dated between the middle of the fifth century until the first decades of the sixth century AD. Three of the well-preserved workshop kilns have been studied archaeomagnetically. The full vector of the geomagnetic field, accompanied by rock magnetic analyses of the studied material, has been defined. The archaeomagnetic study revealed similar directions among the three kilns indicating and confirming their contemporary use. Additionally, several luminescence measurements were obtained on material from the same kilns. The dating of the site was performed with both methods. The archaeomagnetic dating is convergent with the archaeological estimation only when its upper limit is considered. Concerning the luminescence dating, the calculated ages (corrected for anomalous fading and for the ⁴⁰K content) with their standard deviations are convergent with the archaeological estimations for the first kiln, while for the other two, the results seem to be incompatible. The possible factors that provoked this divergence are thoroughly discussed.     

A pottery workshop with flint tools on blades knapped with copper at Nausharo (Indus civilisation, ca. 2500 BC)

Twenty years after its discovery, the pottery workshop of Nausharo (province of Baluchistan, Pakistan), which yielded a series of knapped stone tools in association with unbaked sherds and clay waste, is still of unique importance in Asian protohistorical studies. The types of pottery production (sandy marl fabrics) identified in this workshop, which is dated to ca. 2500 BC, correspond to the majority of the domestic pottery discovered at the site during the first two phases of the Indus Civilisation. The flint blades discovered in the workshop were made from exotic flint, coming from zones close to the great Indus sites such as Mohenjo-Daro and Chanhu-Daro. This is also the origin of a small amount of the pottery (micaceous fabrics) found at Nausharo in domestic contexts, e.g. Black-Slipped-Jars. The butts of the blades display features characteristic of pressure detachment with a copper pressure point. Gloss and microwear traces (polish) testify to the blades' having been used for finishing the clay vessels: for actual finishing (trimming) while they were being turned on a wheel, and possibly also for scraping by hand. Both of these operations are distinctly attested to by the presence in the workshop of two different types of clay shavings.     

The ivory workshop of Valencina de la Concepción (Seville,Spain) and the identification of ivory from Asian elephant on the Iberian Peninsula in the first half of the 3rd millennium BC

During excavations in the huge ditched enclosure of Valencina de la Concepción (Seville, Spain), the main centre from the first hierarchical framework-settlement in the Guadalquivir Valley, a pit with remains of a context for producing ivory artefacts, dating from the first half of the 3rd millennium BC, was discovered in the large metallurgical nucleate workshops. Scientific (Optical Microscopy, FIRT and Raman Spectroscopy, C/N Isotope Ratio Mass Spectrometry) analyses revealed that the ivory belonged to Asian elephants and the archaeological study, which was made in a specialized workshop context. In this paper we present the archaeological context, the study of the ivory artefacts and the state of research on ivory in the Lower Guadalquivir Basin during the 3rd millennium BC. In a parallel way, this paper discusses the significance of this workshop context in the configuration and function of the long distance circulation of raw material and the specialized craft areas in the first political centres.     

Craft Specialization and Adze Production on Hawai'i Island

Abstract

Archaeological models of economic organization in complex societies frequently hinge on indications of craft specialization. Interpretations of such specialization in the Hawaiian islands often involve large-scale production of basalt adzes at Mauna Kea, the largest known quarry in the Pacific region. The recent discovery of expedient non-specialized production of adzes at Pohakuloa outside the main quarry of Mauna Kea, illustrates another dimension of Hawaiian economic systems. The identification of both small-scale and large-scale adze production has important implications for archaeological studies of craft specialization. The Hawaiian example illustrates that some aspects of production, such as context scale, and intensity, may vary within a single technological tradition. This study also suggests that previous interpretations of craft production that have emphasized differences across time — or across different categories — must also address variation among individual groups of contemporary materials.     

A FUNCTIONAL ANALYSIS OF MISSISSIPPIAN CERAMIC VESSELS FROM TOWN CREEK

Abstract

Vessel shape, size, and use-alterations are used to identify vessel types and vessel functions among Mississippian ceramics from the Town Creek site in central North Carolina. Possible functions are discussed for vessel types, and broad distinctions are made regarding vessels that possibly were used for cooking, serving and eating, or storage. The composition of the overall vessel assemblage at Town Creek indicates that it is generally comparable with other Mississippian assemblages. A consideration of the distribution of vessel types by context allows some insights into the association of different activities with different parts of the Mississippian community at Town Creek, namely, that the mound area was associated with distinctive vessel assemblages.     

THE CROW DOWN HOARD, LAMBOURN, WEST BERKSHIRE

Summary.   The discovery of a hoard of five middle Bronze Age gold objects during a metal-detecting rally on the Lambourn Downs in 2004 precipitated an archaeological investigation into their character, provenance and context. This article describes the objects themselves, their composition, how they were made and their archaeological background. It also reports the result of forensic archaeological work undertaken on them. The parallels for the objects and the social context of their deposition are discussed.     

QUANTIFICATION AND DISTRIBUTION OF LIPID IN ARCHAEOLOGICAL CERAMICS: IMPLICATIONS FOR SAMPLING POTSHERDS FOR ORGANIC RESIDUE ANALYSIS AND THE CLASSIFICATION OF VESSEL USE

Organic residue analysis has been performed on 62 reconstructed vessels from a single archaeological site (Rounds, Northamptonshire, U.K.). In order to establish regions of lipid accumulation within a vessel, sherds were sampled from different parts of a vessel, for example base, body and rim, and submitted to lipid extraction procedures. The techniques of high-temperature gas chromatography (GC) and GC/mass spectrometry (GC/MS) were then used to analyse the sherd lipid extracts. The quantitative results obtained show differential accumulation and preservation of lipid in various parts of the same vessel. This latter observation has serious implications for the sampling of potsherds for organic residue analysis. Furthermore, the amount of absorbed lipid varies quite considerably between vessel types. On this basis, a new method is proposed for classifying vessel use by comparing the concentration of lipid present in different parts of individual vessels.     

The design of effective and efficient trial trenching strategies for discovering archaeological sites

This paper reports a study on the effectivity and efficiency of trial trenching strategies for site discovery within the context of Dutch archaeological heritage management. It discusses the principles of site discovery by means of trial trenching, and suggests the optimal strategies for trial trenching survey, based on the results of simulations. Effective and efficient strategies for discovering different groups of archaeological sites are given, according to their presumed size, shape and feature density. The recommended strategies will be included in the Quality Norm for Dutch archaeology.     

RAMESSIDE GLASS-COLOURING CRUCIBLES*

The preparation of glass in New Kingdom Egypt heavily involved the use of crucibles. Shape, mode of operation and function of these vessels have been reconstructed on the basis of new, stratified material from the excavation at Qantir, eastern Nile Delta. The crucible fabric, the internal layer protecting the vessel from the charge, and the glass melted in the crucibles are characterized by chemical and petrographic studies. The crucibles were apparently employed mainly to add the colourants to the glass. The broader archaeological context strongly suggests that glass production in the Late Bronze Age has been a highly developed, specialized and organized craft, with different factories for glass production, for colouring, and for working, connected by a wide-ranging trade network.     

Spatial organization of the Gravettian mammoth hunters' site at Kraków Spadzista (southern Poland)

One of the largest and best known sites of the Central European Gravettian is the Kraków Spadzista site. This article summarizes archaeological, palaeontological, and zooarchaeological data from the site, obtained in the course of more than 40 years of excavations and studies. The site is known mainly from the discovery of the large mammoth bone accumulation in trench B. During field work conducted in a few trenches located close to this assemblage, numerous human artifacts and faunal remains were found. On the basis of analyses of lithic materials, faunal remains, and radiometric data it is concluded that the Krakow Spadzista site was frequently re-occupied during a few weeks or months, by groups of Gravettian hunters in the period 24–22,000 rcyBP This short-term camp site was related to mammoth hunting. The analysis allowed identification of three possible activity zones, characterized by the presence of different groups of flint tools, fireplaces, and different faunal assemblages: a camp area, a lithic workshop, and an animal-processing area, besides the well known accumulation of mammoth bones.