Archaeometric Investigation of Medieval Pottery from Excavations at Novo Brdo,Serbia

Medieval pottery from excavations at Novo Brdo, Serbia, an important mining and trading centre during the 14th and 15th centuries, was investigated by a combination of optical microscopy, inductively coupled plasma – optical emission spectrometry, Fourier transform infrared, micro‐Raman and energy‐dispersive X‐ray fluorescence spectroscopy and X‐ray powder diffraction methods in order to determine its composition and firing temperature. The samples investigated were made of medium‐ to coarse‐grained, non‐calcareous clay, by a relatively well‐controlled firing procedure in an oxidizing atmosphere. The firing temperature was estimated to be 850–950°C. The similarity between the chemical composition of the investigated pottery and the local raw clay, combined with the outward appearance and the archaeological findings, indicate domestic production. The pottery is covered with the transparent lead‐rich glaze. Iron and copper were used as colourants.     

PETROGRAPHIC AND GEOCHEMICAL EVIDENCE FOR LONG‐STANDING SUPPLY OF RAW MATERIALS IN NEOLITHIC POTTERY (MENDANDIA SITE,SPAIN)

Pottery from the Neolithic Mendandia site has been studied. The radiocarbon dating of the site corresponds to a range of dates from 7488–7546 cal bc to 5283–5437 cal bc : the first occurrence of pottery is dated at 5968–6040 cal bc for the lower level III, and up to 5386–5560 cal bc for level II. The antiquity of the potsherds places them within the oldest pottery production sequences in the Iberian Peninsula, which adds to the interest of this study. Ten potsherds from level II and five from level III are analysed for their petrographic and chemical characterization. The petrographic data show two different methods of raw materials manufacture—intentionally tempered pottery (ITP), using calcite and/or limestone and grog, and naturally or non‐intentionally tempered pottery (NTP). According to the matrix paste features, on the basis of the amount, shape, and average or size range of the mineral inclusions, clayed (type A) and sandy (type B) paste types were established and related to two different source areas. The chemical features also indicate two raw material sources and are in agreement with the petrographic paste types. The absence of significant chemical and mineralogical differences between the pottery from levels II and III suggests two contrasting areas for raw materials supply that lasted for at least 600 years.     

CHEMICAL–MINERALOGICAL ANALYSES AND MICROSTRUCTURAL STUDIES OF PREHISTORIC POTTERY FROM RAHMATABAD,SOUTH‐WEST IRAN*

A series of prehistoric pottery samples excavated from Rahmatabad, south‐west Iran, were investigated using XRF and XRD analyses to determine their chemical and mineralogical compositions. The sample microstructures were also studied by SEM/EDX. The relative similarity of compositions, the fine, dense and homogeneous microstructures and the presence of high‐temperature phases such as diopside and mullite showed the use of high firing temperatures, in the range 950–1050°C. This, along with the homogeneity in shape, decoration and size ranges of the ware, all indicate the adoption of specialized pottery‐making techniques by the potters of Rahmatabad in the fifth to fourth millennia bc .     

THE DISCOVERY OF ANOMALOUSLY HIGH SILVER ABUNDANCES IN POTTERY FROM EARLY ROMAN EXCAVATION CONTEXTS IN JERUSALEM*

This is the first study on the differential distribution and concentrations of silver in ceramics recovered from archaeological excavations. The chemical compositions of 1174 pottery vessels from 38 Roman‐period sites in Israel have been determined. Unusually high and variable abundances of silver were discovered in pottery samples of all vessel types and chemical compositions from four distinct archaeological contexts dating to late first century bce to 70 ce Jerusalem. The large majority of the Jerusalem vessels could be distinguished by their silver abundances from all analysed pottery pieces recovered at rural sites outside Jerusalem, even when the pottery types and chemical compositions, except for silver, of pottery found within and outside Jerusalem were indistinguishable. The evidence is suggestive of a human origin for the high and variable silver abundances, and dispersion of the silver by aqueous transport. The differential silver concentrations found in excavated pottery from Jerusalem and other urban and rural sites suggest that attention to the distribution of silver in pottery from excavated contexts may be helpful for evaluating the nature and function of archaeological remains and patterns of urban contamination.     

The Firing Temperature of Pottery from Ancient Mesopotamia,Turkey, Using Luminescence Methods: A Case Study for Different Grain‐Size Fractions

The assessment of the firing temperature of a prehistoric pottery sample collected from ancient Mesopotamia, Turkey was studied using luminescence techniques. The methods for this estimation involved the observation of the thermal and pre‐dose sensitization with various re‐firing temperatures for both TL and the OSL signals. In the former case, the 110°C TL peak and the rest of the glow curve were used as proxies in this study. In the framework of a first attempt to investigate the impact of grain‐size dependence on the sensitization of the luminescence signals, the aforementioned study was performed with four different pottery grain‐size fractions: (i) less than 60 μm, (ii) 60–90 μm, (iii) 90–180 μm and (iv) 180–250 μm. The results clearly demonstrated the firing temperature mark of ～500°C in for the grain size of 90–180 μm, while—as in the case of the lower grain‐size fraction—a third proxy, the ratio of the pre‐dosed to the thermal sensitization, was seen to indicate the firing temperature. The remaining two grain‐size fractions failed to provide any meaningful results with regard to the firing temperature estimation. The dependence of the TL characteristics on the grain size was explained in the framework of the mixed mineralogy.     

ANALCIME CRYSTALLIZATION AND COMPOSITIONAL PROFILES—COMPARING APPROACHES TO DETECT POST‐DEPOSITIONAL ALTERATIONS IN ARCHAEOLOGICAL POTTERY*

The approaches of comparative studies and profile measurements, often used in order to detect post‐depositional alterations of ceramics, have been applied simultaneously to two sets of Roman pottery, both of which include altered individuals. As analytical techniques, Neutron Activation Analysis and X‐Ray Diffraction have been used. Both approaches lead to substantially different results. This shows that they detect different levels of alteration and should complement each other rather than being used exclusively. For the special process of a glassy phase decomposition followed by a crystallization of the Na‐zeolite analcime, the results suggest that it changes high‐fired calcareous pottery rapidly, and so fundamentally that the results of various archaeometric techniques can be severely disturbed.     

A Study Of The Firing Technique Of Pottery From Kaman‐Kalehöyük,Turkey, by Synchrotron Radiation‐Induced Fluorescence X‐Ray Absorption Near‐Edge Structure (Xanes) Analysis*

Fe K‐XANES spectra of a series of pottery sherds excavated from the archaeological site of Kaman‐Kalehöyük, Turkey, were measured to reveal the firing technique of the pottery. The analysis disclosed relationships among the chemical form of the iron, the firing conditions and the colour of the pottery. The pottery referred to as ‘Grey Ware’ found at this site was classified into two groups according to the chemical form of the iron. Also, it was revealed that the Iron Age pottery referred to as ‘Cream Ware’ was produced first under reducing conditions, and then fired under oxidizing conditions.     

Firing Techniques of the Impasti from the Protohistoric Site of Concordia Sagittaria (Venice)

⁵⁷Fe Mössbauer spectroscopy provided relevant information on the firing techniques employed in manufacturing concotto and coarse pottery, two types of fired clay mixtures (impasti) of the protohistoric settlement site of Concordia Sagittaria. The firing techniques of Concordia were reconstructed by comparing the Mössbauer patterns of the artefacts with those of the local raw clays fired in the laboratory. The concotto was produced in kilns by firing clay mixtures under oxidizing conditions at 700–1000°C, or at lower temperatures in the open air. The firing of these clay mixtures containing mainly ground pieces of waste pottery, resulted in hard and variously coloured construction materials, particularly suitable for humid environments. In turn, the coarse pottery was produced by firing clay mixtures more homogeneous than those used for the artefacts of concotto. The firing of coarse pottery was performed under reducing conditions at about 900°C with a final exposure to air by opening the hot kiln. Light and agreeable coarse pottery, with a red surface on the grey-black core, was obtained when the effective temperature of air was higher than 500°C.     

Origins of Specialization: The Ceramic Chaîne Opératoire and Technological Take‐Off at Vinča‐Belo Brdo,Serbia

This paper presents scientific analyses of Neolithic pottery from Miloje Vasi?’s 1930 –34 excavations at Vin?a‐Belo Brdo, which has long been a key site in south‐eastern European prehistory. Results show a series of changes in the chaîne opératoire of pottery production, both between the early Neolithic Star?evo and middle–late Neolithic Vin?a periods, and between Vin?a A and Vin?a B phases. Unlike in Star?evo assemblages, Vin?a pottery fabrics probably served specific functions, but cult objects (an anthropomorphic figurine and several prosopomorphic lids) were made locally using the same raw materials and technology used to make Vin?a fine ware. In contrast to the uniformity of Star?evo pottery technology, Vin?a pottery production was geographically diverse and evolved over time. Higher firing temperatures of Vin?a pottery apparently preceded the development of metallurgy by more than a century.     

The Potential of EBSD and EDS for Ceramics Investigations—Case Studies on Sherds of Pre‐Columbian Pottery

The work focuses on the potential of structural and chemical examinations by scanning electron microscopy based methods for archaeometric studies on ceramics. Achieved by a single preparation technique (polished block sections), the feasibility and benefits of electron backscatter diffraction are demonstrated as case studies using polychrome examples of pre‐Columbian pottery (Wari, Moche and Cajamarca). Elemental and phase maps allow for separate consideration of clay and temper. Identification of mineral phases and intergrowths of temper particles provide information for clarifying clay procurement and firing techniques with respect to local versus non‐local pottery to enlighten trade relations, technological transfer and shared heritage of pre‐Columbian cultures.     

INVESTIGATION ON ROMAN LEAD GLAZE FROM CANOSA: RESULTS OF CHEMICAL ANALYSES*

Five sherds of green glazed pottery excavated at Canosa (Apulia) in Italy have been analysed by scanning electron microscopy. The aim of the investigation was to determine the chemical composition of the glazes and thus obtain information on the methods used in their production. The glazes were all of the high‐lead type, coloured green by the addition of copper. Intermediate layers, observed at the interface between the glaze and body and giving the appearance of an applied white slip, were the result of the crystallization of lead feldspar from the molten glaze. Non‐calcareous clays were used in the production of the pottery bodies. Concentration profiles from the glaze exterior to the body suggested that the glazes were produced by applying a suspension consisting of lead oxide plus silica to the bodies. On the basis of the glaze and body compositions, it is suggested that the Canosa glazed pottery was produced locally.     

THE IMPORTANCE OF THE ‘BEST RELATIVE FIT FACTOR’ WHEN EVALUATING ELEMENTAL CONCENTRATION DATA OF POTTERY DEMONSTRATED WITH MYCENAEAN SHERDS FROM SINDA,CYPRUS

Neutron activation analysis of pottery was established at Bonn in 1983 and has since become one of the primary archaeometry‐based analytical techniques at the facility. A brief history of the laboratory and a discussion of the best relative fit procedure for pottery is provided. When comparing concentration data for pottery, a best relative fit should always be considered. This mathematical procedure generally results in ‘sharper’ concentration patterns and improves the separability of chemically not very different compositional groups. This is demonstrated for a set of 30 Late Cypriot (Myc. IIIC1) pottery samples from Sinda, Cyprus, which allow formation of a good reference pattern for this site. Applying factors in the range of 0.82–1.43, a number of samples from Egypt and Palestine can be assigned with high probability to a Cypriot origin.     

Pottery Styles during the Early Jomon Period: Geochemical Perspectives on the Moroiso and Ukishima Pottery Styles

Energy‐dispersive X‐ray fluorescence (EDXRF) was used to determine the minor and trace element chemistry of 92 Early Jomon pottery sherds. The sherds came from four contemporary sites in the Kanto region and belong to either the Moroiso or Ukishima style of pottery. Principal components analysis (PCA) and discriminant analysis indicate that there are four major groups in the data set, which correspond to site location. Furthermore, for sites having both Moroiso and Ukishima pottery, the statistical tests indicate that both styles of pottery were made from the same or geochemically similar raw materials. This suggests that both styles were probably made at the same site, and indicates that if the different pottery styles are reflecting ethnic identity, then intermarriage between ethnic groups is occurring. Alternatively, the pottery styles could be reflecting some sort of social interaction between groups.     

The production technology of Iznik pottery—a reassessment*

Previous research has established that Iznik pottery differs from other Islamic stonepaste pottery in that its stonepaste bodies contain lead oxide as well as soda and lime, and that a significant proportion of the tin oxide in its glaze is present in solution rather than as tin oxide particles. In order to better understand these distinguishing features, the chemical compositions and microstructures of Iznik pottery and tile samples, together with those of lumps of glass found in association, were investigated using both scanning electron and optical microscopy. These data have been supplemented by the study of replicate lead–alkali glazes produced in the laboratory with a range of different compositions. The results demonstrate that separate soda–lime and high‐lead glasses were used in the production of Iznik stonepaste bodies, and that the total glass contents of the bodies were significantly higher than those quoted by Abū’l‐Qāsim, who was writing in about ad 1300. The very high purity of the lead–soda Iznik glazes indicated that the alkali flux used was either a purified plant ash or an as yet unidentified mineral source of soda. Replication experiments established that the high solubility of tin oxide in the glaze was due to the high purity of the glaze constituents. Furthermore, it is suggested that tin oxide was added to the glaze in order to give it a very slight opacity and thus obscure any blemishes in the underlying body.     

河南焦作化电集团西晋墓发掘简报

2003年10月焦作市文物工作队发现一座西晋墓(2003JHM1),清理出武士俑、牛车、角兽、马、灶、井、多子槅、俑等文物23件(套)。根据墓葬形制与随葬品判断此墓时代为西晋中期。     

The Provenance of Red Figure Vases From Locri Epizephiri (Southern Italy): New Evidence by Chemical Analysis

Thirty‐nine samples of red figure pottery found at Locri Epizephiri were analysed for 18 chemical elements by inductively coupled plasma emission spectroscopy. The finds, dated from the end of the sixth to the fourth century bc , were assigned to Attic, Sicilian and Locrian workshops due to their style of execution. Prior to facing the archaeological questions, possible biases on sample classification due to variable firing conditions, or to alteration during burial, were investigated: the results supported the opportunity of a refiring pre‐treatment. Multivariate statistical treatment of the analytical data confirms the separation between Attic and non‐Attic samples; comparison with the composition of black gloss pottery suggests that all the non‐Attic red figure vases could be the output of Locrian workshops.     

THE HISTORY OF THE LAWRENCE BERKELEY NATIONAL LABORATORY INSTRUMENTAL NEUTRON ACTIVATION ANALYSIS PROGRAMME FOR ARCHAEOLOGICAL AND GEOLOGICAL MATERIALS

The Lawrence Berkeley National Laboratory pottery provenance group developed standards and instrumental neutron activation analysis (INAA) methods that are used at many archaeometry laboratories around the world. The background and development of ‘Standard Pottery’ and of methods for INAA are described. Early pottery provenance studies are described, and other research programmes, involving obsidian and magmatic mixing, the origin of the stone used for the Colossi of Memnon, and the ‘Plate of Brass’, are mentioned. Research work by the Laboratory included the discovery of the world‐wide iridium anomaly and extensive subsequent research on what has come to be known as the ‘Asteroid Impact Theory’. Characteristics of the analytical programme for pottery provenance work, including overall aims, precision and accuracy, intercalibration, and irradiation and measurement protocols, are discussed. New research areas developed in the past 15 years, to broaden the usefulness of chemical compositional data for archaeological investigation, and examples of recent work, are described. This research, which makes use of high‐precision X‐ray fluorescence analysis in addition to INAA measurements on sample splits, includes distinguishing the products of different workshops located at the same production site, studies on the significance of the distribution of silver in archaeological pottery and the use of high‐precision chemical compositional data as an aid for making chronological distinctions.     

Exploring Diversity in Household Pottery Traditions in Crusader Greece: a Case Study from the City of Thebes,Boeotia

This paper provides new data on an under‐documented topic in Aegean archaeology, that of the impact of Latin–Greek cohabitation on craftsmanship, socio‐economic organization and household pottery traditions. The chosen approach is a petrographic study of the provenance and technology of 37 cooking pots, jugs, basins and storage jars from the city of Thebes, Boeotia. The ceramics span from the late 12th to the mid‐14th century and thereby cover the periods of Byzantine, Frankish and Catalan control over the city. The analysis indicates that most pottery products were not locally made during these periods. Pottery consumption at Thebes involved, in the 12th/13th century, regional products from northern Boeotia, while pottery supplies from Euboea that had developed under Byzantine rule continued into the 14th century, well after Boeotia and Euboea came into the hands of, respectively, Frankish and Venetian lords in the aftermath of the Fourth Crusade (1204). The petrographic analysis also allows for the characterization of Byzantine and Latin tempering practices of the pottery fabrics. These results highlight phenomena of regional economic reliance in central Greece and provide rare evidence for the cross‐cultural diffusion of technological knowledge in the late medieval Mediterranean.     

STUDYING TECHNOLOGICAL PRACTICES AT A LOCAL LEVEL: NEUTRON ACTIVATION AND PETROGRAPHIC ANALYSES OF EARLY CERAMIC PERIOD POTTERY IN CENTRAL CHILE*

We discuss neutron activation and petrographic analyses of domestic ceramics and some raw materials from five archaeological sites in the Valdivia de Paine locality, in Central Chile. During the time period studied, the area was occupied by small‐scale horticultural groups with disperse and sedentary or semi‐sedentary settlement patterns. The analyses indicate that diverse local raw material sources were used in pottery production, and shared by members of different co‐residential units and between different cultural groups. The data indicate as many similarities as differences among the technological practices of pottery‐producing groups who lived in spatial proximity. The results have implications for the understanding of pottery‐producing communities at a local level, as well as small‐scale groups in general.     

The technology and production of glazed ceramics from Middle Islamic Jerash,Jordan

Jerash in northern Jordan was, despite a focus on its classical heritage, also active in the Middle Islamic period, but little is known about actual developments during this period. This study represents the first study on the Middle Islamic glazed pottery from the site using scanning electron microscopy energy‐dispersive spectrometry (SEM‐EDS) and thin‐section petrography. The results show that two production traditions existed, each with different provenances. The local production is characterized by a non‐calcareous ceramic body and the use of a high‐lead glaze coloured with iron and copper oxides, whereas the turquoise‐glazed samples, likely imported from Mesopotamia, have a calcareous ceramic body and alkali or alkali‐lead glaze.