秦汉时期的马车形制研究

秦汉时期的马车分单辕马车和双辕马车两种,单辕车为主,双辕车次之。本文依据车舆以及马车结构上的变化进行类型学上的分类,以期获得马车在该时间段内演进的大概脉络,同时也能提供考古发掘中所发现的类似马车时代的判定标准。     

江苏徐州市奎山四座西汉墓葬

2005年8月,徐州博物馆在徐州市南郊西奎山北麓清理了4座西汉时期夫妻同穴合葬墓。其中M9、M10为石坑竖穴墓,竖穴底部并列葬夫妻二人;M11、M12为石坑竖穴洞室墓,竖穴底部及洞室内均葬有人。墓葬虽遭盗扰,但仍出有陶器、原始瓷器、铜器、铁器、漆木器、玉石器等。4座墓分布较为集中,应为同一家族墓葬。     

THE LARGEST KARST CAVES AND SHAFTS OF THE USSR

Increased speleological activity in the last 20 years has led to the discovery of 5,000 karst caves and shafts, concentrated mainly in the Caucasus, the Crimea and the Gissar-Alay mountain system of Soviet Central Asia. The largest caves and deepest shafts of the USSR are identified, and their basic characteristics are listed. The author discusses the position of portals, the character of the watersheds feeding the undergound streams, the morphology of the cavities, the rate of flow of underground streams, the chemical composition of the water, and the mutual arrangement of karst cavities.     

Vascular Grooves on Human Femora and Tibiae as a Potential Activity‐related Trait

The presence of vascular grooves on the shafts of femora and tibiae was scored for a sample of human remains from a mass burial at Tell Majnuna, Syria, dated to the early fourth millennium bce . In the sample of 140 femora and 64 tibiae, many of which were damaged or fragmented, the grooves were most common on the femoral midshaft (31/108 = 28.7%) and on the proximal and middle shaft of the tibia (10/45 = 22.2 and 14/54 = 26.0%, respectively). For femoral midshafts, the difference in mean cross‐sectional size and shape indices between bones with and without vascular grooves was checked with multivariate analysis of variance for a sample of 51 bones. The presence of grooves appeared to correspond significantly with higher mean values of both indices. As the shape index is interpreted as an indicator of the level of terrestrial mobility and the size index may be used for sex assessment, it is possible that vascular grooves occur more frequently at the femoral midshafts of men and more active individuals, and thus they may be cautiously interpreted as another activity‐related trait. Copyright © 2012 John Wiley & Sons, Ltd.     

IS THE MACROSCOPIC CLASSIFICATION OF FLINT USEFUL? A PETROARCHAEOLOGICAL ANALYSIS AND CHARACTERIZATION OF FLINT RAW MATERIALS FROM THE IBERIAN NEOLITHIC MINE OF CASA MONTERO*

Casa Montero is a mining complex located outside Madrid (Spain), dated from the Early Neolithic (c. 5400–5000 cal bc ). An area of some 4 ha has been investigated and some 4000 shafts recorded, of which 324 have been excavated. The characterization of its raw flint materials and the establishment of its diagnostic features are indispensable in the reconstruction of the distribution of the mine's products beyond the immediate site. This work reports the geological study of the mine's Miocene flint layers and their petrological characterization. Archaeological samples from the mine's shafts were classified according to macroscopic features and petrological characteristics.     

SHAFT‐HOLE AXES FROM SLOVENIA AND NORTH‐WESTERN CROATIA: A FIRST ARCHAEOMETRIC STUDY ON ARTEFACTS MANUFACTURED FROM META‐DOLERITES*

A group of Copper Age shaft‐hole axes from Caput Adriae (northeastern Italy, western Slovenia and northwestern Croatia) manufactured using meta‐dolerite have been analysed for major and trace elements. All the samples show magmatic textures and well recognizable relicts of primary mineralogical phases. Petrographic observations suggest an ophiolitic provenance of the protolithic source(s) while geochemical data indicate that the original magmas originated in a fore arc or pre arc tectonic setting. Strong similarity has been found with several lithotypes from the Banija Ophiolite Complex (Croatia), here indicated as the most probable source area. Considering the available archaeometric data about shaft‐hole axes found in northern Italy and Caput Adriae in comparison to those of axe blades discovered in the same area, it emerges that there is a utilization of different rock types, the source of which appears to be quite close to the discovery sites. In the investigated area the shaft‐hole axes are largely made from ophiolitic‐related rocks which are associated with copper deposits. Consequently there may have been a relation between the localization of the geological sources of shaft‐hole axes and the development of metallurgical activities.     

Zooarchaeological evidence of large-scale cattle metapodial processing in the 18th century in the small town of Rauma,Finland

SUMMARY: In this article we examine and interpret a cattle-bone assemblage from the small town of Rauma, Finland, dating to the early 18th century, exhibiting evidence for large-scale raw bone material collection and preparation. Sawn ends of bovine metapodials originating from at least 230 individuals were found in shallow pits near the town border. Bones from adult male cattle dominated the sample. The uniformity of the craft process, careful selection of the bones and the concentrated deposition of the waste indicate a professional large-scale operation aimed at preparation of half-finished products. The shafts were probably not worked further at this site. It is likely that metapodial shafts were exported to larger cities, such as Stockholm, because Rauma, or possibly even the whole of 18th-century Finland, would not have had the markets for such a large number of end products.     

The Correspondence of Regional Patterns and Local Strategies in Formative to Classic Period West Mexico

Archaeological research in West Mexico has tended to emphasize two widely distributed and interlocking sets of archaeological remains—the shaft tombs associated with funerary ritual in the Formative/Early Classic periods (1500 B.C.–400+ A.D.) and the Teuchitlan tradition public architecture of the Late Formative/Classic (300 B.C.–900 A.D.) periods. Each is found across a wide area, and each has been used by archaeologists of different persuasions to define West Mexico as a cultural region. This paper contrasts the shaft tomb phenomena with the Teuchitlan Tradition and concludes that their core–periphery patterns are the result of two different kinds of elite–elite relationships. These, in turn, appear to be distinct local level strategies by elites to develop a following and to establish pools of available labor.     

Caribou metapodial shaft splinter technology

A technique for the extraction of long narrow bone splinters for the production of bone artifacts is reported. Caribou metapodial bones from the Paxson Lake site, central Alaska, were modified by striking behind the lateral and medial borders of the posterior surface using a percussion method. The resulting fragments are termed shaft splinter cores and shaft splinters. The long shaft splinters may have been used for producing a variety of bone implements.     

Indigenous African Furnace Types and Slag Composition—Is there a Correlation?

Within variation, three major iron smelting furnaces were used in the Iron Age of sub‐Saharan Africa, ranging from the natural draught driven tall shaft to the forced draught powered low shaft and bowl furnaces. These furnace types are, however, mostly known from the ethnographic context. Often, archaeologists are confronted with remnants from the smelting process, forcing them to speculate on the anatomy of the extant furnaces. The presence of multiple fused tuyeres has been used to identify natural draught furnaces in the archaeological record. However, working back from smelting remains such as slag to the furnace type using physical and chemical evidence has generally proved to be ‘undoable’. Thus, when randomly selected, the chances are high that one cannot separate bowl furnace slags from those that formed in their tall or low shaft counterparts. This observation is hardly unexpected; analogous thermodynamics and thermo‐chemical reactions governed bloomery smelting irrespective of furnace type. Rehren et al. (2007) have labelled this phenomenon the ‘tyranny of system driven constraints’. In this study, we argue that the hierarchical use of statistical methods may add another layer of evidence which, when coupled to archaeological indicators, may be useful in correlating slag chemistry to furnace types used in antiquity.     

Characterising the potential of sheep wool for ancient DNA analyses

The use of wool derived from sheep (Ovis aries) hair shafts is widespread in ancient and historic textiles. Given that hair can represent a valuable source of ancient DNA, wool may represent a valuable genetic archive for studies on the domestication of the sheep. However, both the quality and content of DNA in hair shafts are known to vary, and it is possible that common treatments of wool such as dyeing may negatively impact the DNA. Using quantitative real-time polymerase chain reaction (PCR), we demonstrate that in general, short fragments of both mitochondrial and single-copy nuclear DNA can be PCR-amplified from wool derived from a variety of breeds, regardless of the body location or natural pigmentation. Furthermore, although DNA can be PCR-amplified from wool dyed with one of four common plant dyes (tansy, woad, madder, weld), the use of mordants such as alum or iron leads to considerable DNA degradation. Lastly, we demonstrate that mtDNA at least can be PCR-amplified, cloned and sequenced from a range of archaeological and historic Danish, Flemmish and Greenlandic wool textile samples. In summary, our data suggest that wool offers a promising source for future ancient mitochondrial DNA studies.     

成都老官山汉墓出土织机复原研究

成都老官山汉墓出土了四台多综织机模型,提供了古代多综织机的实物证据。它们都采用一样的移动齿梁选综机构,提综机机构却有不同,一台织机用一个旋转踏板提升滑框,滑框再提升多片纹综。另外三台方法相同,用一个旋转踏板提升连杆,连杆再提升多片纹综。通过出土文物的实物对照,分析选综机构和提综机构的机械原理,比较两种提综机构的性能优劣,从而推断滑框式织机可以织造经向纹样循环大的经锦,但操作较费力;曲柄连杆式织机织造的经锦纹样循环虽小,但操作省力。分析过程同时也展示了古人杰出的智慧和创造力。     

A study of dimensional differences of tooth marks (pits and scores) on bones modified by small and large carnivores

The use of tooth mark sizes to infer carnivore types when analyzing the modification of faunal assemblages has been criticized on the base of intense overlap in tooth mark size among differently sized carnivores. The present study analyzes this overlap and presents some critical explanations for it. This work is based on the largest collection of tooth pit dimensional data collected to date for some of the most relevant carnivore types. The study empirically shows that small and large carnivores can be clearly differentiated when using tooth pit size, with a higher discrimination when using tooth marks on dense shafts than on cancellous ends. It is argued that most previous studies of tooth mark sizes have reproduced a higher overlap probably because sample sizes were small, and experiments were carried out using small carcasses (which require a smaller bite force) or for a combination of factors.     

新疆沙湾宁家河水库墓地发掘简报

宁家河水库墓地位于新疆塔城地区沙湾县克孜勒乔克村。2011年6~8月,新疆文物考古研究所对墓地进行了抢救性发掘,共清理墓葬115座,出土有陶、金、银、铜、铁、石、骨器等。墓葬类型丰富,可分为竖穴石室墓、竖穴偏室墓、竖穴土坑墓、无墓室墓,各自具有鲜明的文化特征。这些墓葬的年代属于青铜时代中晚期、早期铁器时代、汉代、唐至元四个时期。本次发掘为研究天山北麓考古学文化序列及文化交流提供了新资料。     

Developments in Harnessing and Draught in the Roman World

Material remains of harness elements from different parts of the Roman Empire have contributed to a new interpretation of the harness depicted on funerary reliefs of the second‐third centuries AD from north‐western Europe and on other figured documents, such as Trajan's Column in Rome (dedicated in 113 AD). As recent experimental reconstruction has shown, the curved wooden plaques, held firmly in place by a metal bow, may have formed a precedent for the collar and hames developed during the Middle Ages into the form still in use today. The most important innovation was the introduction – no later than the second century AD – of single draught between shafts, replacing traditional paired draught with pole and yoke. There is even some evidence that other elements of modern harness, such as traces and the whippletree, hitherto considered to be medieval inventions, were also known during the period of the Roman Empire.     

Damage to Bird Bones in Pellets of GyrfalconFalco rusticolus

Fragmentation and digestion of bird bones in pellets of the gyrfalconFalco rusticoluswere studied. Remains of the axial skeleton, including the head, were very scarce. Whole bones were rarely preserved. Tibiotarsi and most other long bones were the best elements for the calculation of the minimum number of individuals. All types of bones were heavily modified by digestion: with a few exceptions, traces of digestion were observed on more than 80% of articular ends, nearly 100% of broken surfaces, and on some shafts.     

“They Laid Planks ‘Crost the Coffins”: The African Origin of Grave Vaulting in the United States

Grave vaulting, a vernacular burial form common in nineteenth and early twentieth century America, consists of a simple primary grave shaft at the bottom of which is dug a smaller secondary shaft or niche within which the body or coffin is placed. Typically loose boards are then placed over the secondary shaft to offer protection from the soil coming into direct contact with the body or burial container. This tradition is documented through historical accounts and hundreds of excavated graves through a survey of 86 historic cemetery investigations. Although its cultural origins have been previously unknown, this study argues that the vaulted burial form in the United States is likely of African origin. An extensive ethnological survey of historical and modern cultures throughout the continent of Africa, from 1602 to the mid twentieth century, documents both the vaulted grave form and its variations. Correlating this African cultural practice to its use in the United States demonstrates a hitherto unrecognized creolization of Euroamerican mortuary tradition with African roots, and its corollary, the retention of an African mortuary tradition by those of African descent.     

Analyses of measurements taken from adult femurs of a British population

The femur remains an important bone in palaeoanthropology and this paper reports various analyses of measurements taken from long-cassette radiographs of adult femurs of a reference population from the south of England (n=81, males 33, females 48). Discriminant analysis confirmed that the male femur is usually larger than the female femur, and that a femur may be sexed with some confidence. Discriminant scores have been derived to permit estimates to be made, from the whole or a part of a femur, of the probability of the male gender. Outcomes from a principal component analysis suggest: that the female proximal femur is a morphological unit; that neck length and shaft length are dissociated and there is no common factor representing linearity; and that the male bicondylar width is anomalous, a finding that is confirmed by other analyses. An estimate of the robusticity of the complete female, but not male, bone may sometimes be made from a proximal fragment. The robusticity of the complete bone may be made confidently from the shaft for both genders. The two width variables relating to a distal fragment cannot be used to predict the robusticity of the complete bone for either gender. A method of defining the position of the waist in terms of displacement in deciles down the shaft is described. The position of the waist seems to have a bimodal distribution. The positive association between age and distal displacement may be due to remoulding of the shaft with age or to a cohort (generational) effect. There is a weak correlation between a small neck–shaft angle and the distal displacement of the waist, two archaic phenotypic traits. Ten statements in the literature relating to the femur have been examined and tested; six are confirmed and four are unconfirmed, and it is suggested that there is a need for further studies relating to the morphology of the femur.     

四川地区西汉土坑墓分期研究

目次一墓葬形制分析二随葬器物类型学研究三墓葬分期与变迁分析四墓葬区域特征分析五结语四川地区(包括今重庆市)西汉时期的墓葬,以土坑墓为主。该地区20世纪90年代以前发现的西汉时期墓葬虽然数量相对较多,但大部分材料较零散,且多数墓葬中的器物保存较差,资料不够完整。正是由于上述原因,迄今未有专文对四川地区西汉土坑墓进行研究,仅有个别文章有所涉及,始终无法深入。何志国对四川地区西汉土坑木椁墓进行了初步分析后,做了大     

Worked Human Femur from Gohar Tepe,Iran

A simple tool made from a gracile human femoral shaft was retrieved from a small animal bone assemblage found in a Late Bronze Age stratum at Gohar Tepe, Iran. The specimen has been identified as a chisel or gouge for which no analogous examples are known in the Near East. Studies examining similar tools from other regions suggest that such a tool may have been used for wood processing or pottery smoothing. Copyright © 2012 John Wiley & Sons, Ltd.