中国古代砖砌体力学性能研究综述

古代砖砌体建筑由于材料劣化、环境影响,材料特性及力学性能均受到不同程度的影响和损伤,为了保护历史文化的载体,结合古建筑材料获取原始且必要的数据,系统总结了古砖、传统灰浆的制备工艺和材料性能,简要归纳了古砖、传统灰浆和古砖砌体基本力学性能及其测试方法,对比分析了单砖和砌体抗压强度的差异以及古建筑砌体材料力学性能研究现状。并对今后古砌体如弹性模量等力学性能、古砌体材料及结构的损伤机理等的研究提出了展望或建议,可为砖石古建筑的修缮保护提供参考依据。     

Modeling the Seismic Response of Modern URM Buildings Retrofitted by Adding RC Walls

Modern unreinforced masonry buildings with reinforced concrete slabs are often retrofitted by inserting reinforced concrete walls. The main advantages of this technique are the increase in strength and displacement capacity with respect to masonry structures. This article presents two modeling approaches for evaluating such structures: a shell-element model and a macro-element one. The objective is to formulate practical recommendations for setting up a macro-element model using as input the geometry of the structure and results from standard material tests. Structural configurations of masonry buildings, in which the insertion of reinforced concrete walls is an efficient retrofit technique, are also investigated.     

Rubble Stone Masonry Walls Strengthened by Three-Dimensional Steel Ties and Textile-Reinforced Mortar Render,Under Compression and Shear Loads

This article addresses the results of a structural strengthening solution for rubble stone masonry walls. The strengthening includes inserting three-dimensional steel ties across the thickness of the walls and a 30-mm layer of air-lime and cement mortar render reinforced with glass fiber mesh (textile-reinforced mortar), on both sides of the wall. The strengthening solution was found to be efficient for rehabilitating ancient rubble stone masonry walls due to the “three-dimensional” confinement, provided by the steel wires, by offsetting the low cohesive capacity of the mortar used in the walls and thus improving the mechanical resistance and delaying the collapse mechanisms. This study is part of an experimental research program carried out in Universidade Nova de Lisboa, to evaluate structural strengthening solutions for ancient rubble stone masonry buildings. To this end, three specimens of rubble stone masonry walls without strengthening (unreinforced masonry) and other three, with the mentioned strengthening solution, were subjected to compression and shear load tests. Building materials were also tested in order to characterize physical, chemical and mechanical properties.     

Experimental analysis of rubble stone masonry walls strengthened by transverse confinement under compression and compression-shear loadings

Stone masonry walls of ancient buildings have reasonable resistance to vertical loads but lower resistance to shear forces and reduced tensile strength. However, to achieve such compressive strength the masonry must not disaggregate when subjected to loading. This can be achieved if during the construction of the walls larger stones, usually referred as “through stones”, are used, spanning the thickness of the wall, making it possible to improve the transverse confinement of the masonry. For rehabilitation projects and structural reinforcement of such buildings, the transverse confinement can be achieved by fixing steel elements perpendicular to the wall. This confinement technique is often part of a more comprehensive rehabilitation solution, which includes the application of mortar or concrete reinforced layers applied to the wall surface.

This article presents results of an experimental research on material properties and mechanical characterisation of stone masonry specimens strengthened by two transverse confinement solutions (independent steel reinforcing rods and continuous steel ribbons wrapping the specimen). Specimens were tested under compression and compression and shear loadings.

This experimental work is part of a major research project to study the mechanical behavior of URM and strengthened walls, and the characteristics of the building materials of such specimens.     

Comparative Seismic Risk Assessment of Basilica-type Churches

ABSTRACT

This paper discusses the seismic risk assessment of a Basilica-type church according to the provisions of the Italian Guidelines. A comparison between the results obtained with local and global approaches is reported, based on a knowledge process aimed to characterize the geometric and mechanical parameters required for a reliable structural analysis. To perform the global analyses the finite element technique was employed, with proper assumptions to account for the nonlinear behavior of masonry. Illustrating a case study, the paper critically discusses about the employability of pushover analysis methods for the seismic assessment of basilica-type churches.     

Numerical Study on the Peak Strength of Masonry Spandrels with Arches

This article presents a numerical study on the force-deformation behavior of masonry spandrels supported on arches which are analyzed using simplified micro models. The model is validated against results from quasi-static cyclic tests on masonry spandrels. A large range of spandrels with different arch geometries, material properties, and axial load ratios are studied. The numerical results are compared to peak strength values predicted with an existing mechanical model. Finally, estimates for the initial stiffness and the spandrel rotation associated with the onset of strength degradation are derived.     

A DAMAGE MODEL FOR THE ANALYSIS OF THE SEISMIC RESPONSE OF MONUMENTAL BUILDINGS

In this paper the Author proposes a damage model for the analysis of masonry plates and shells, which is based on an improvement of a previous constitutive model. The modifications introduced, connected to the head joint damage, allow us to study the influence of masonry texture on the damage modes once the mechanical characteristics of the elements constituting the masonry and the results of tests on simple assemblages are known. Having a nonlinear constitutive model is certainly one of the basic elements for understanding the damage mechanisms in masonry buildings. If, in fact, an elastic-linear constitutive model may be used under normal loading conditions, in critical situations it is necessary to model the damage and the dissipation mechanisms that occur between the elements, stone (brick) and mortar, in correlation with their characteristics and kind of masonry. To validate the model a comparison is made between the numerical and experimental results, in the case of tests available in the literature in masonry panels subjected to out-of plane loading and in a real structure through the observation of the damage in Umbria (Italy) surveyed after the 1997 earthquake.     

Stonemasons of Mt. Jishi

The Technique of Stone Ma- sonry at Rdo Sbus Lung Pa The technique of masonry as used in construction in Tibet can be dated back to the Yumbulagang during the Tubo Kingdom and it still prevails all over Tibet.Buildings of all kinds on the plateau,such as watchtowers and civilian residences,have adopted this technique.A variety of buildings show this historic Tibetan inheritance and its evolution. To apply this stone masonry technique to building construction closely Connects with the     

Earthquake Protection of Colonial Bell Towers in Colima,Mexico with Externally Prestressed FRPs

A methodology for the seismic vulnerability reduction of old masonry towers with external prestressing is presented. It is applied at the Colonial bell-towers of the Cathedral of Colima, Mexico, characterized for being a high seismic area (M>7.5). The 3D FE models are calibrated with experimental data and assessed through nonlinear static approaches including the seismic demand and an accurate validated masonry model. Based on an extensive parametric study on different configurations of old masonry towers, it is selected an optimal prestressing force and device. The Colonial towers are retrofitted with four prestressing devices of FRPs to convert them into a high energy-dissipative reinforced masonry. The external vertical prestressing is included at key points identified in the seismic vulnerability assessment. This technique is in compliance with the demand for architectural conservation and may be located without drilling and unbounded in order to be fully removable. The seismic performance is enhanced by increasing force, displacement, and internal confinement. It is observed an upgrading of 35% and 20% of displacement capacity. With these results it is corroborated that external vertical prestressing allows a substantial increment of ductility for seismic energy dissipation purposes.     

Experimental characterization of the constitutive materials composing an old masonry vaulted tunnel of the Paris subway system

A significant proportion of the Paris metro tunnels comprise a masonry vault built out of stone blocks and mortar joints, and sidewalls and slabs made of unreinforced concrete. In order to provide the necessary data for future structural evaluation, an extensive laboratory testing programme has been conducted to characterize the materials of the tunnel separately, i.e., mortar, stone, and concrete. The tests, carried out on specimens taken from cores extracted from a 1930s tunnel, enabled to determine the mechanical properties, including direct tensile, shear strength, and mode I fracture energy, as well as the properties of the stone-mortar interface. Results show that the masonry mortar joints could reach 10 cm in width, and that blocks of stone varied in composition and porosity, thus producing a wide range of mechanical properties. The concrete was composed of large-sized aggregates and showed low stiffness and strength. Based on these experimental results, ratios between mechanical characteristics are hereby proposed. Perspectives on the use of this experimental data in a finite element model are then discussed.     

Determination of Shear Strength of Masonry Panels Through Different Tests

This study addresses the problem of evaluation of strength of masonry walls. In-plane behavior of masonry panels has been studied under monotonic diagonal-compression and shear-compression loading in quasi-static test facility. The results of 35 laboratory and in situ tests are analyzed to show that in the case of the diagonal compression test results are lower than the strength of masonry walls evaluated trough the shear-compression test, highlighting the problem of choosing the test which best simulates to the real behavior of the masonry when stressed by lateral loads. A presentation is also given of the results of a F.E. investigation for shear strength evaluation of masonry walls. F.E. modeling non-linear procedure was used for the representation of masonry panels. The numerical simulations are compared with experimental results and the reliability of the different finite element models is discussed, thus confirming the different shear strength values measured in the experimental campaign.     

Nonlinear Structural Performance of a Historical Brick Masonry Inverted Dome

ABSTRACT

Traditional domes are obtained by double curvature shells, which can be rotationally formed by any curved geometrical plane figure rotating about a central vertical axis. They are self-supported and stabilized by the force of gravity acting on their weight to hold them in compression. However, the behavior of inverted domes is different since the dome is downward and masonry inverted domes and their structural behaviors in the literature received limited attention. This article presents a nonlinear finite element analysis of historical brick masonry inverted domes under static and seismic loads. The brick masonry inverted dome in the tomb of scholar Ahmed-El Cezeri, town of Cizre, Turkey, constructed in 1508 is selected as an application. First, a detailed literature review on the masonry domes is given and the selected inverted dome is described briefly. 3D solid and continuum finite element models of the inverted masonry dome are obtained from the surveys. An isotropic Concrete Damage Plasticity (CDP) material model adjusted to masonry structures with the same tensile strength assumed along the parallel and meridian directions of the inverted dome is considered. The nonlinear static analyses and a parametric study by changing the mechanical properties of the brick unit of the inverted masonry dome are performed under gravity loads. The acceleration records of vertical and horizontal components of May 1, 2003 Bingöl earthquake (Mw = 6.4), Turkey, occurred near the region, are chosen for the nonlinear seismic analyses. Nonlinear step by step seismic analyses of the inverted dome are implemented under the vertical and horizontal components of the earthquake, separately. Static modal and seismic responses of the inverted masonry dome are evaluated using mode shapes, minimum and maximum principal strains and stresses, and damage propagations.     

Simulation of Shake Table Tests on Out-of-Plane Masonry Buildings. Part (VI): Discrete Element Approach

ABSTRACT

Although many experimental tests and numerical models are available in the literature, the numerical simulation of the seismic response of existing masonry buildings is still a challenging problem. While the nonlinear behavior of masonry structures is reasonably predictable when the out-of-plane behavior can be considered inhibited, when the in-plane and out-of-plane responses coexist and interact, simplified models seem unable to provide reliable numerical predictions. In this article, taking advantage of the experimental tests carried out in a shaking table on two masonry prototypes at LNEC, a macro-element approach is applied for the numerical simulations of their nonlinear response. The adopted approach allows simulating the nonlinear behavior of masonry structures considering the in-plane and out-of-plane responses. Since it is based on a simple mechanical scheme, explicitly oriented to representing the main failure mechanisms of masonry, its computational cost is greatly reduced with respect to rigorous solutions, namely nonlinear FEM approaches. Two modeling strategies are adopted, namely a regular mesh independent from the real texture of the prototypes and a detailed one coherent with the units disposal. The numerical results are discussed and the correlation between the nonlinear static analyses and the dynamic response is provided.     

A MICROMECHANICAL INELASTIC MODEL FOR HISTORICAL MASONRY

A micromechanical damage model for the Snite element modelling of historical masonry structures is presented in this article. Masonry is considered as a composite medium made up of a periodic assembly of blocks connected by orthogonal bed and head mortar joints. The constitutive equations, in plane stress, are based on the homogenisation theory and they consider the non linear stress-strain relationship in terms of mean stress and mean strain. Different in-plane damage mechanisms, involving both mortar and blocks, are considered and the damage process is governed by evolution laws based on an energetic approach derived from Fracture Mechanics and on a non-associated Coulomb friction law. The failure domain of the model is analysed both in the equivalent stress and in the principal stress space considering different orientations of the bed joints relative to the loading direction. A comparison with experimental results is provided. A numerical simulation of masonry walls subjected to horizontal forces proportional to their own weight is shown in order to discuss the model's capability of describing the influence of the masonry microstructure on its mechanical behaviour.     

Methods and Approaches for Blind Test Predictions of Out-of-Plane Behavior of Masonry Walls: A Numerical Comparative Study

ABSTRACT

Earthquakes cause severe damage to masonry structures due to inertial forces acting in the normal direction to the plane of the walls. The out-of-plane behavior of masonry walls is complex and depends on several parameters, such as material and geometric properties of walls, connections between structural elements, the characteristics of the input motions, among others. Different analytical methods and advanced numerical modeling are usually used for evaluating the out-of-plane behavior of masonry structures. Furthermore, different types of structural analysis can be adopted for this complex behavior, such as limit analysis, pushover, or nonlinear dynamic analysis.

Aiming to evaluate the capabilities of different approaches to similar problems, blind predictions were made using different approaches. For this purpose, two idealized structures were tested on a shaking table and several experts on masonry structures were invited to present blind predictions on the response of the structures, aiming at evaluating the available tools for the out-of-plane assessment of masonry structures. This article presents the results of the blind test predictions and the comparison with the experimental results, namely in terms of formed collapsed mechanisms and control outputs (PGA or maximum displacements), taking into account the selected tools to perform the analysis.     

Structural Assessment of Ancient Masonries before and during a Rehabilitation Process

ABSTRACT

The rehabilitation of old buildings requires detailed knowledge of the mechanical characteristics and stress state of the structural elements, which play an important role in the intervention process. In this sense, non-slightly destructive tests can estimate structural characteristics with good precision at relatively low costs. Consequently, this article presents a device, based on the flat jack technique, applied to continuous stress monitoring over time. It also focuses on the onsite determination of service stresses and its continuous monitoring in several masonry buttresses of a historic building, as well as the assessment of the structural safety before, during, and after an intervention process. A brief analysis of the research is performed, and the motivation and the methodology adopted are described. Finally, the evolution of the measurements recorded and the analysis of the results achieved are detailed. The study enabled recommendations to be made to the intervening agents that guarantee structural safety.     

Seismic Vulnerability of Historical Masonry Aggregate Buildings in Oriental Sicily

ABSTRACT

The seismic vulnerability assessment of historical UnReinforced Masonry (URM) buildings is a very complex task since it is strongly related to a great variety both of geometrical layouts and of masonry mechanical characteristics. In this article, some results of a Catania University research project, denomined “FIR 2014”, focused on the seismic vulnerability estimation of historical buildings, built in Catania after the 1963 earthquake, are presented. First, a detailed typological analysis of the considered urban fabric, characterized by typical residential masonry buildings, has been performed. Such analysis allowed recognizing an elementary structural modulus, which has been studied according to different geometrical layouts representative of isolated or aggregate buildings. The results of nonlinear static analyses, performed by applying an innovative macro-element approach, allowed for the assessment the seismic vulnerability of typical URM buildings coherently to the Italian seismic code. The adopted macro-element strategy for the seismic assessment of aggregate masonry buildings, although related to a specific historical center, may be applied to similar urban fabrics and can also be used for the calibration and validation of fast seismic assessment strategies, particularly useful for the evaluation of the seismic risk at urban scale.     

Sonic Tomography for Masonry Walls Characterization

ABSTRACT

Nowadays, Sonic Pulse Velocity tests (SPV tests) are widely applied for detecting the morphology, hidden defects, and voids within structural elements. This technique, largely applied because non invasive and easy to perform, reveals particularly adapt in the case of ancient buildings, where usually any damage is not tolerated due to the historical preservation requirements. Moreover, recently the SPV tests have been also applied with tomography technology to obtain images of sonic speeds from which it is possible to rapidly reconstruct the internal elements morphology.

In this article, the results of some SPV tomographies regarding masonry elements are presented. The tests are carried out with the aim of establishing consistency and accuracy of this technique in determining the morphology of the investigated elements. The influence of investigation points number and noise smoothing is taken into account, too. At first, the results of a tomography derived from synthetic data of an ideal section are shown. Then, the SPV tomographies of some masonry specimens and of elements sections of a real case study are illustrated and compared among them.     

Dome of the Basilica of Santa Maria Degli Angeli in Assisi: Static and Dynamic Assessment

This study presents the results of the static and dynamic assessment of the dome of the Basilica of Santa Maria degli Angeli in Assisi, designed by Galeazzo Alessi. The first section is devoted to an overview of the masonry domes designed by the Italian architect and focuses on the structural solutions adopted in the several cases described to better understand Alessi’s designing skills. In the second part, the drum-dome system is analyzed in order to attain a structural assessment. The static assessment is performed by means of limit analysis and finite element model approaches with non-linear mechanical behavior. The obtained results are consistent with the detected crack pattern and confirm the suitability of the reinforcement steel rings applied to the drum. The seismic assessment has been performed by response spectrum analysis. Due to the lack of specific information, a probabilistic approach for the material mechanical properties was used. The results obtained highlight an adequate seismic response of the structure that can be attributed to the dynamic properties of the slender drum-dome system. This finding justifies the good performance of the structure during the seismic events of 1832 and 1997.