Plant macroremains from the Roman harbour of Pisa (Italy)

Abstract

Results relating to the identification of macroscopic plant remains (leaves, fruits, seeds) discovered during the archaeological excavation of the Roman harbour of Pisa, in Tuscany, Italy are reported. The plant samples include the cultivated species Prunus spp., Corylus, Olea, Vicia, Juglans and the nemoral wild species Salix spp., Quercus spp., Fagus, Ulmus, Alnus. The remains of cultivated plants — fragments of fruits and seeds — were perhaps part of the boats' cargo or stores for the crew's meals. In the case of the wild taxa, the simultaneous presence of fruit and leaves, suggests that the remains recovered came from the forest vegetation bordering the area of excavation and the adjacent higher grounds, thus delineating a new vegetation landscape for the ager pisanus.     

Plant remains and amphorae from the Roman harbour under Flacius Street in Pula (Istria,Croatia)

The aim of this archaeobotanical and archaeological research is to expand knowledge about Roman diet and plant cultivation in Istria and to compare it with similar localities on the Eastern Adriatic coast. We have also tried to find some new information about maritime trade routes in the Mediterranean area in ancient times. Out of 27 samples collected from an excavated Roman port in Flacius Street in Pula, in total, 9809 plant macrofossils were recovered, identified and analysed. The results of the analysis show that most of the plant remains belong to the group of fruit trees and nuts. The most abundant are the remains of Ficus carica, Pinus pinea, Vitis vinifera subsp. vinifera, Rubus fruticosus agg. and Olea europaea subsp. europaea. These are all species that are widespread in the Mediterranean area and have likely always been consumed by the local population. The number of ruderal and weed species found is relatively high (31) in comparison with other plant categories (fruit trees and nuts; fruit collected from the wild; cereals; condiments; oil crops; vegetables and tubers; plants of fresh water environments; elements of maquis), but as they came to the site accidentally and not by targeted human activity, there are far fewer macrofossils of such plants than those of cultivated species. There were a few elements of evergreen forest vegetation and plants of aquatic habitats at the site (2 + 1), which suggests the existence of this type of vegetation in the area of the site in Roman times. Archaeobotanical comparisons of the site in Flacius Street with similar coastal Roman sites—Verige Bay on Veli Brijuni (first-fifth century ad), the port of Zaton near Nin (first-third century ad) and Caska Bay on the island of Pag (first and second century ad)—reveal considerable similarities, confirming the uniformity in nutrition and plant growth in the wider coastal area. Together with the two Roman ships, during the archaeological excavations of the Roman harbour and its layers, we collected over 2000 different archaeological artefacts out of which a large number was almost perfectly preserved. Some of the mentioned artefacts include ceramic amphorae, ceramic table- and kitchenware, ceramic lamps, different usable objects made of glass, wooden use objects, parts of ship’s equipment and other wooden tools, architecture elements from the nearby port as well as residential structures and remains of stone monuments. Because of the large amount of artefacts found at the site, the analysis of the artefacts and data processing are still in progress. As a contribution for recognizing organic remains, we isolated the amphorae whose purpose was the storage and maritime transportation of different food products and ingredients.     

Timber economy in the Roman Age: charcoal data from the key site of Herculaneum (Naples,Italy)

The city of Herculaneum (Naples, southern Italy), buried by the volcanic eruption of Mount Somma-Vesuvius in 79 ad, is a key site for understanding the timber economy during the Roman period. In this paper, the results of charcoal analysis of different building element types are presented. Beams, joists, poles, planks and door and window frames were investigated allowing us a view of which timber the Romans preferred for building in this area. We also fit the taxonomic results into the reconstruction of the ancient Campanian landscape, and finally, we discuss the knowledge that the Romans had about the technological properties of the wood that they used for building and the possible selection criteria that they followed in choosing them. Coniferous timber is the preferred material for building purposes. Abies alba is especially used, this fact confirming its stronger presence in southern Italian woods during the past and suggesting that its decline is mainly due to human overexploitation. The large presence of Cupressus sempervirens, selectively used for the production of poles, confirms that this tree was cultivated in plantations for timber production in the Vesuvius area. Furthermore, it might indicate that cypress could have been present as a natural tree in the local vegetation, suggesting a forest type that nowadays almost completely disappeared from this area and from the entire Italy. The findings of Juglans regia, Pinus pinea and Olea europaea, typical elements of the Mediterranean cultural landscape, show that their use was not limited to fruit production and that Romans also appreciated their timber. Beside these local resources, the presence of Picea abies and Picea/Larix indicates the importation of timber from northerly regions, probably the northern Apennines and the Alps.     

The Roman Ship 'punta Scifo d' and its Marble Cargo (Crotone,Italy)

In the first three centuries AD, large‐scale building projects, both in Rome and in the western colonies, stimulated the demand for marble from the eastern quarries. The Punta Scifo D shipwreck – discovered in 1986 in the Bay of Scifo, south of Crotone, Italy, and investigated in 2011 and 2013 by a team from the Università Ca' Foscari of Venice – is an important source for the reconstruction of this kind of trade in the Roman Empire. Studies of the cargo, dated to the third century AD, were the basis for the virtual reconstruction of a barge about 40 m long carrying a cargo of almost 340 tons. Petrographic and isotopic analyses demonstrated that it carried three different types of marble: mainly Proconnesian, some Pentelic, and one slab of Dokimean marble. The ship probably departed from the island of Marmara, and stopped at Ephesos, and perhaps also at Piraeus.     

White and Coloured Marbles of the Roman Town of Urbs Salvia (Urbisaglia,Macerata, Marche,Italy)

The results of an archaeometric study concerning the coloured stones and 14 white marble sculptures found in the ancient city of Urbs Salvia (Urbisaglia, Macerata) – one of the main Roman archaeological sites of the Marche region (east central Italy) – are presented here. Data show the presence of the most important decorative stones used by the Romans, originating in all of the Mediterranean provinces, from Egypt and North Africa to Asia Minor, Greece, Gallia, Iberia and Italy. Thirty‐one different coloured lithotypes have been identified, including red and green porphyries as well as marmor phrygium and numidicum, namely the four most expensive stones cited in Diocletian's edict. Crustae of marmor chium, taenarium, chalcidicum, scyreticum, lucullaeum and sagarium also feature. Another significant presence is that of coloured stones that are generally rare, even in Rome and Ostia, such as cipollino mandolato (which is very abundant at Urbs Salvia, more than anywhere outside Gallia), broccatello di Spagna, alabastro a pecorella, lapis ophytes, brecciated facies of marmor iassene and cottanello antico. Worthy of mention, too, is the abundant presence of so‐called Roman breccia from Lez (Upper Garonne valley, French Pyrenees), a stone never reported outside Gallia. The 14 marble sculptures analysed come from public and private buildings of the Roman city and are now exhibited at the Archaeological Museum of Urbisaglia. Our petrographic and isotopic analyses show that they are made of Lunense (five), Pentelic (three), Parian lychnites (three), Thasian (three) and Proconnesian (one Corinthian capital) marbles. The quality of the coloured stones identified, together with the presence of sculptures made of precious imported white marble varieties, reveals an opulent town and a local patronage wishing to decorate public buildings and rich houses with the most sought‐after marbles of Rome.     

A case of cranial trepanation in a Roman necropolis (Cassino,Italy, 3rd century BC)

The aim of this study was to investigate an individual from a Cassino necropolis of the 3^rd century BC. The inhumation shows a rectangular wound between the sagittal and lambdoid sutures of the cranium. Furthermore a series of pathological traces on the post‐cranial skeleton are present. The trepanation of the skull seems intentional: probably a healed surgical procedure to treat a sword wound. Copyright © 2007 John Wiley & Sons, Ltd.     

Unveiling the Use of Creta in Roman Plasters: Analysis of Clay Wall Paintings From Brixia (Italy)

The paper describes the analysis of a particular kind of plaster from the walls of the Roman Sanctuary (first half of the first century bce ) in the centre of Brixia (now Brescia, Italy), which is an outstanding example of Roman Republican architecture. The walls were plastered and painted with different patterns, imitating marble panels and curtains. Optical microscopy on thin sections, X‐ray diffraction and infrared spectroscopy were performed on several samples of the plaster in order to reveal the execution technique. The palette consisted of glauconite, celadonite, Egyptian blue, and red and yellow ochres. In some cases, an organic compound, possibly a lipidic compound, was present in the external paint layer, as a surface treatment. The plaster contains two superimposed coats: the render coat with lime binder and sandy aggregate; the finish coat with a clay fraction (illite, chlorite, kaolinite), together with calcite from slaked lime and grains of quartz, silicate and carbonate rocks. Although Vitrivius' De architectura reported the use of creta (clay) as daub smeared on reed vaults, the Sanctuary of Brixia represents the first documented use in Roman buildings in a painted plaster laid on a stone masonry wall.     

Glass from the Archaeological Museum of Adria (North-East Italy): new insights into Early Roman production technologies

In the present study, the first archaeometric data on an ample selection of intentionally coloured (or decoloured) Early Roman glass (1st–2nd centuries AD) from the Archaeological Museum of Adria (Rovigo, Italy) are reported. The analysed samples are 61 in total, both transparent and opaque, and were characterised from the textural (SEM-EDS), mineralogical (XRPD) and chemical (XRF, EPMA, LA-ICP-MS) points of view. This combined approach allowed us to identify the raw materials and production technologies employed in the manufacture of glassware. Results for the transparent samples show that they are all silica-soda-lime glasses. Most of them, independently of colour, have compositions close to those of typical Roman glass, produced with natron as flux. No relationships were identified among chemical compositions, types or production techniques, but a dependence on bulk composition was identified for some particular colours, revealing the careful and intentional selection of raw materials. This is the case of Sb-colourless glass, produced with sand of high purity, a group of intensely coloured objects, mainly emerald green and black, produced with soda ash as flux, and some blue examples produced with various sources of sand or soda ash as flux. Two main types of opacifiers were identified for the opaque samples: calcium antimonate for white, mauve and blue glasses, and lead antimonate for the yellow ones; in one case, a yellow lead-tin antimonate was also identified. As regards the opaque glasses, most of the samples opacified with calcium antimonate are silica-soda-lime in composition, similar to the typical Roman glass. Instead, samples opacified with lead and/or lead-tin antimonates are lead glasses, suggesting different production technologies.     

Roman Millstones from Orvieto (Italy): Petrographic and Geochemical Data for A New Archaeometric Contribution

The probable site of extraction and production of Pompeian‐style leucite‐bearing millstones, singled out by Peacock (1980, 1986) in the vicinity of Orvieto, and the outcropping of the ‘Leucitophyre’ lava have been systematically studied employing standard petrographic and geochemical methods (optical microscopy and ICP–AES/MS spectrometry). The combination of petrochemical data, previously very poor, allowed us definitively to exclude the possible ‘overlap’ of phonolitic and tephri‐phonolitic lavas from other Quaternary Volcanic Districts of Latium, and provides a helpful tool for future work on leucitite millstones. Consequently, the databank obtained has been used to attribute the origin of five Roman millstones discovered in three archaeological sites in central Italy (Latium and Marche). It has also been useful to verify the geological provenance of some Sicilian and French leucitite millstones analysed by previous workers. The results point to a provenance from the Orvieto area, with the exception of the millstones from Sicily, for which a different origin was hypothesized.     

A Multidisciplinary Approach for the Archaeometric Study of Pozzolanic Aggregate in Roman Mortars: The Case of Villa dei Quintili (Rome,Italy)

This contribution focuses on the study of historical mortars from a Roman archaeological site known as Villa dei Quintili, a monumental villa located in the south‐eastern part of Rome (Italy). The study was carried out on 38 mortar samples, collected from several edifices within the complex. A multi‐analytical approach, including polarized optical microscopy, scanning electron microscopy coupled with energy‐dispersive system and laser ablation inductively coupled plasma mass spectrometry, was used to analyse the pozzolanic material used for the preparation of mortars. Data obtained on both major and trace elements were compared with the compositions of Pozzolana Rossa, Pozzolana Nera and Pozzolanella samples from the Alban Hills volcanic district, collected from a historic quarry nearby, as well as with literature data. The results of such a multidisciplinary approach allowed us to recognize the use of all three pozzolan types for the aggregate fraction of examined mortars from the Villa dei Quintili.     

Decorated prehistoric pottery from Castello di Annone (Piedmont,Italy): archaeometric study and pilot comparison with coeval analogous finds

Prehistoric pottery decorated with incisions or impressions filled with white and seldom coloured inlays is well documented in the archaeological literature, but the related in-depth archaeometric studies are sporadic. 43 decorated ceramic shards, dating from the Neolithic to the Bronze Age, and an Iron Age fibula from the archaeological site of Castello di Annone (Piedmont, North-Western Italy) were analysed with FTIR, Raman and XRPD for characterization of the ornamental pigments forming these inlays. Few white components were used as fillers, namely talc and bone ash (hydroxyapatite – Bone White), often as a mixture and seldom accompanied by other pigments (i.e. kaolinite and presumably secondary calcite). Comparison with freshly-heated biogenic hydroxyapatite proved that ancient Bone White pigment was calcined at about 900 °C. Such a process was kept separate from pottery firing as these white mixtures show absence of talc degradation by-products and sporadic presence of kaolinite, implying these ceramics were decorated only after firing in furnace. Actual presence of fluorapatite in bone ash could allow dating with the Fluorine Method, but lack of fluorine detection with SEM-EDS causes such an attempt to be impracticable so far. A pilot comparative study with a restricted but representative group (11) of coeval finds from other sites of Piedmont suggests that while recurrence of talc prevails in Castello di Annone from the Neolithic throughout the Bronze age, massive use of bone ash (Bone White) becomes widespread in the close Iron Age settlements, possibly consequent to a more efficient handling of its production technology.     

The Architectural Reuse of Roman Marble and Stone Spolia in the Early Medieval Monte Sorbo Church (Sarsina,Central Italy)

We present the results of a multi‐method archaeometric study concerning the architectural elements reused in Monte Sorbo church (Sarsina, central Italy) between the eighth and ninth centuries AD . The provenance study has focused on classical marbles and stones, which clearly do not originate from the local Apennine geological formations and are thought to come from extra‐regional sources. A large fraction of the tested marbles is from Asia Minor, coming from both the Proconnesian district on Marmara Island and, probably, the Hasançavuslar site near Ephesus (Greco scritto). Of the four remaining marbles investigated, one is from the Carrara district and three are from different Greek quarrying areas, such as Mount Pentelikon (Athens) and the Thasos and Paros islands. The data also highlight the reuse of decorated gravestones made of Pietra di Aurisina as architectonic elements. This limestone is a fossiliferous carbonate stone outcropping in the Trieste Karst region (north‐eastern Italy), which was exploited by both the Romans and the Byzantines. The assignment of all of the columns of the central nave to the same source area provides an argument in favour of their provenance from a single monument, which was probably located in Sarsina or Ravenna, with the ‘colourful taste’ that is typical of the late Antonine and Severian periods.     

Preliminary Analysis of the Hull of the Roman Ship from Grado, Gorizia, Italy

The hull of the Roman wreck at Grado has been partially preserved under the cargo of amphoras. The right side presents a rare evidence of a section of the waterway. The ship has been assembled by mortise-and-tenon technique following a shell-first conception. All the frames, except one, are of pine while planking is either of pine and elm. Some strakes, of larix , are a repair made by patch-tenons; a wale shows an other kind of repair. Various signs left by the shipwright are on the hull. In the stern area, a box of wooden elements had to protect a 'hydraulic system'.
© 2006 The Authors     

Roman Builders Facing the Risk of Disaster: Coupling Archaeological and Geochemical Analyses on a Section of the ‘Aqua Augusta’ (the Roman Serino Aqueduct,Southern Italy)

Four samples of carbonate sinters from two sites of the Roman Serino aqueduct were studied in order to better constrain the history of the aqueduct and to estimate to what extent natural hazards can be recorded in such deposits. Micromorphological observations, trace element, stable oxygen and carbon isotope analyses were performed on the samples. Together with new quantitative observations on the construction techniques of the aqueduct, our results highlight the imprint left by geological hazards on the Serino aqueduct. Damage, disruption, ground movement and a debris‐flow are evidenced.     

Effectiveness of Phosphocitrate as Salt Crystallization Inhibitor in Porous Materials: Case Study of the Roman Mosaic of Orpheus and the Beasts (Perugia,Italy)

Salt crystallization in porous materials constitutes one of the major causes of decay of buildings/archaeological sites in a wide range of environments. Desalination is among the most common methodologies of conservative treatment for salt decay. However, classic desalination techniques might be not suitable for long-term conservation. During the past decade interest has been an increasing towards crystallization inhibitors as a new means of controlling crystallization damage. This study deals with the first in-field application of an environment-friendly inhibitor system— phosphocitrate (PC). In particular, the case study of the Roman mosaic of Orpheus and the Beasts in Perugia (Italy) is presented. The inhibitor is completely soluble in water or alcohol, non-toxic, and easy to apply, thus enabling its use in accordance with the volatile organic compounds emission control and safety during the conservation works. Relevant samples from control and treated mosaic areas were collected and analyzed comparatively by means of Fourier transform-infrared spectroscopy, scanning electron microscopy, and energy dispersive spectrometry to study the potential of the inhibitor system in preventing/controlling salt damage in such archaeological site.     

Magnetic detection of ship ballast deposits and anchorage sites in King Herod's Roman harbour,Caesarea Maritima,Israel

Ballast stone deposits are a common feature of sediments in ancient harbour basins but are often overlooked as a potential source of archaeological information. Recent geophysical investigations at Caesarea Maritima in Israel have discovered a thick, laterally extensive ballast layer in the area seaward of the 1st c. BC Roman harbour. The ballast deposits were identified by low-relief mounds on the seabed with elevated magnetic intensities. Jet probing and excavation of magnetic anomalies at several locations revealed a 20–60 cm thick rubble layer containing large quantities of Late Roman and Byzantine pottery, local sedimentary boulders (kurkar sandstone, limestone cobbles) and foreign igneous and metamorphic boulders (granite, schist, volcanics; ca. 50%). The foreign boulders and pottery identify the rubble layer as ballast and ships refuse jettisoned by merchant ships outside the harbour. The strong magnetic contrast between the ballast deposits and the natural seabed sediments is attributed to the high magnetic susceptibility (>10⁻³ SI) of crystalline boulders and pottery materials within the ballast rubble.