THE BEGINNINGS OF ISLAMIC STONEPASTE TECHNOLOGY*

A multidisciplinary programme of research on Islamic pottery has been focused on questions of the dating, provenance and technology of Islamic pottery. One particular question has been the development of stonepaste, a material made primarily of crushed quartz with added frit-glass and clay. The combination of the different approaches of this study has revealed early foundations for the technology in ninth-century AD Iraq, apparently originating in the clay ceramic rather than the ‘Egyptian faience’ tradition. Subsequent and final practice developed in tenth- and eleventh-century AD Egypt. This technology becomes the primary body for all fine Islamic ceramics.     

CORRESPONDENCE AND DISCRIMINANT ANALYSES OF SAND AND SAND TEMPER COMPOSITIONS,TONTO BASIN,ARIZONA*

Geologists use petrographic modal analysis to relate fluvial sand composition to source rock composition, thus establishing provenance. Archaeologists seeking to establish provenance of sand temper in pottery can use similar petrographic methods, but their finer scale of investigation requires more precise statistical tools than those employed by geologists. A quantitative method for performing that task is presented. It utilizes correspondence analysis and discriminant analysis of logratio transformed point‐count data to define petrofacies, or sand temper resource procurement zones. The procedure is illustrated with sand and sand‐tempered sherd samples collected from the Tonto Basin, central Arizona; temporal trends in utilitarian ceramic production c. AD 100–1350 are reviewed.     

Ophiolites Associated with Pottery Production in Bronze Age Crete

This study investigates diversity among ophiolite‐bearing sediments that were exploited for pottery production in Bronze Age Crete (c.3000–1200 bc ). The focus is on loose and consolidated formations of Upper Tertiary to Quaternary ages that contain some detrital products of Mesozoic ophiolitic source rocks. A literature review, geological fieldwork, sediment sampling and petrographic analysis are combined to identify the origin, the geographical distribution and the stratigraphic position of these ophiolitic sediments, and to assess regional diversity in their mineralogy and texture. The results provide insights into current archaeological problems regarding the provenance and production of ophiolite‐bearing pottery in Bronze Age Crete.     

PROVENANCE STUDY OF MARBLE ARTEFACTS FROM THE ROMAN BURIAL AREA OF FASCHENDORF (CARINTHIA,AUSTRIA)*

Numerous marble artefacts were among the extraordinary findings excavated at the Roman burial area of Faschendorf (Carinthia, Austria). The provenance of marble objects, particularly in the Roman provinces, is mostly unclear. Predominantly Mediterranean marbles have been used, but there are also some marble occurrences in the eastern Alpine regions that were exploited in those times. Besides a mineralogical–petrographic analysis, grain‐size evaluation in particular, and the determination of carbon and oxygen isotopes allow an effective characterization of the Faschendorf materials. Their provenance from the Gummern Marble complex in Carinthia is very likely.     

Short Note: Provenancing of Pottery— The Need for an Integrated Approach?

The method of chemical provenance determination of pottery is described as a very useful tool, which gives reliable results in most cases, if it is applied correctly and to its full power. Therefore, it is claimed that additional petrographic analysis, the so‐called ‘integrated approach’, should not be considered as a must for each project, but is only needed in cases in which the chemical approach leaves questions to be answered.     

BLACK AND RED GRANITES IN THE EGYPTIAN ANTIQUITY MUSEUM OF TURIN: A MINERO‐PETROGRAPHIC AND PROVENANCE STUDY

A recent project to investigate the stone artefacts preserved in the Egyptian Antiquity Museum of Turin has been undertaken, with the aim of supplying their systematic classification and suggesting the provenance site of the original raw materials. This paper focuses on seven sculptures dating back to the New Kingdom (18th–19th Dynasties): the statue of Ramses II, three of the 21 sculptures of the goddess Sekhmet, the statue of the goddess Hathor, the Ram‐headed Sphinx and the sarcophagus lid of Nefertari. Petrographic observations have shown that all the sculptures are made of granitoid rocks, with variable composition from granite to granodiorite and tonalite. The observation of strong macroscopic analogies with the so‐called black and red granites outcropping in the Aswan area has suggested a common origin of all the raw materials used for their manufacture. In order to verify this provenance hypothesis, several samples were collected in the Aswan quarry districts. According to results of a minero‐petrographic and geochemical comparison between the statues and the Aswan quarry samples, it was possible to identify the source area of the stone sculptures and finally to highlight the importance of an archaeometric approach to the solution of archaeological problems.     

COMPOSITIONAL CHARACTERIZATION OF FRENCH LIMESTONE: A NEW TOOL FOR ART HISTORIANS*

Limestone from quarries known to medieval craftsmen and from the monuments they built and embellished, as well as from carvings now in museum collections, has been characterized by neutron activation analysis. Specimens from 38 quarries in the Lutetian and Jurassic limestone formations of France and from sculptures in American and French museums have been tested, and the results have been compiled in a data base to which art historians may refer when attempting to determine provenance for sculptures. Multivariate statistical analysis of concentration data shows stone from a particular quarry in the Paris basin to be compositionally homogeneous and distinguishable from other quarries in the same formation. The same approach to data related to quarries near the Burgundian abbey of Cluny finds general agreement between classifications based on compositional and on petrographic data, but the number of samples available for analysis at the time of writing was insufficient to achieve the finer distinctions reported for the Paris basin.     

THE SUPPLY OF CAMPANIAN‐MADE SIGILLATA TO THE CITY OF POMPEII

Pompeii is an important temporal reference in the study of Roman ceramics, yet until now the origins of red slip tableware or sigillata found in the city have largely been classified by visual evaluations of the pottery. This investigation employs petrographic and elemental analyses to establish the provenance of sigillata found in two pre–ad 79 contexts of Pompeii. In contrast to previous studies, the results suggest that pottery workshops in the vicinity of Somma‐Vesuvius played a vital role in the supply of sigillata to the city.     

Classification and provenance of soapstones and garnet chlorite schist artifacts from Medieval sites of Tuscany (Central Italy): insights into the Tyrrhenian and Adriatic trade

Soapstones (talc-bearing schists) and garnet chlorite schist artifacts found in Medieval archaeological sites of Tuscany (Central Italy) were classified, in order to define provenance of the different lithotypes. In Italy and throughout the Central Europe, these greenschist facies metamorphic rocks are generally known, among the archaeologists, as the pietra ollare from the Alps. The investigated Tuscan archaeological sites are between 6 and 13th century AD and were strictly linked, in that period, to the well defined network trade running along Tyrrhenian coast. Samples come from little containers used for cooking and preserving food and showing traces of lathe manufacturing at their sidewalls. According to modal mineralogy, petrographic texture, XRD, SEM-EDS and whole rock chemistry we recognised, among the 18 studied findings, three different petrographic groups of the Alpine pietra ollare. (i) Fine grained magnesite talc schists (i.e. soapstones) from outcrops of the Central Alps located in the Valchiavenna area. (ii) Garnet chlorite schists from the Valle d'Aosta region. (iii) Amphibole talc schists (i.e. soapstones) with a provenance in the Ticino area. It is worth noting that artifacts of pietra ollare lithotypes from the Western Alps (i.e. garnet chlorite schists and amphibole talc schists) were not detected in the archaeological sites of the Middle Adriatic coast of the Central Italy, belonging to the same Medieval time interval. This emphasises that the petrographic groups of pietra ollare from the Alps spread to the south of the Po Plain according to Western and Eastern trade along the Italian Peninsula, using respectively, the Tyrrhenian and the Adriatic Sea commercial routes.     

Ancient ‘Black’ Decorative Stones and the Ephesian Origin of Sculptural bigio antico

Isotopic, EPR and petrographic studies aimed at establishing the provenance of sculptural bigio antico are reported, including 18 possible quarry sites and 21 ancient sculptures. The results demonstrate that the Belevi quarry, north‐east of Ephesos, above the more famous white marble quarry, was the major source of this marble. Nineteen artefacts belong to Belevi, whereas the precise origin of the remaining two is unknown, but must probably be found within the same area. The peculiar distribution of δ¹³C values both for Belevi and artefacts was crucial for inferring the correct provenance, subsequently confirmed by additional analytical and petrographic data.     

The production technology of Iznik pottery—a reassessment*

Previous research has established that Iznik pottery differs from other Islamic stonepaste pottery in that its stonepaste bodies contain lead oxide as well as soda and lime, and that a significant proportion of the tin oxide in its glaze is present in solution rather than as tin oxide particles. In order to better understand these distinguishing features, the chemical compositions and microstructures of Iznik pottery and tile samples, together with those of lumps of glass found in association, were investigated using both scanning electron and optical microscopy. These data have been supplemented by the study of replicate lead–alkali glazes produced in the laboratory with a range of different compositions. The results demonstrate that separate soda–lime and high‐lead glasses were used in the production of Iznik stonepaste bodies, and that the total glass contents of the bodies were significantly higher than those quoted by Abū’l‐Qāsim, who was writing in about ad 1300. The very high purity of the lead–soda Iznik glazes indicated that the alkali flux used was either a purified plant ash or an as yet unidentified mineral source of soda. Replication experiments established that the high solubility of tin oxide in the glaze was due to the high purity of the glaze constituents. Furthermore, it is suggested that tin oxide was added to the glaze in order to give it a very slight opacity and thus obscure any blemishes in the underlying body.     

MULTI‐METHOD MARBLE PROVENANCE DETERMINATIONS: THE CARRARA MARBLES AS A CASE STUDY FOR THE COMBINED USE OF ISOTOPIC,ELECTRON SPIN RESONANCE AND PETROGRAPHIC DATA*

A multi‐method approach, based on petrography, stable isotope data and electron spin resonance spectroscopy for assigning the provenance of white marbles, is presented. A total of 11 experimental variables has been used, including the quantitative measurement of the sample colour and its homogeneity. On this basis we attempt to distinguish the three main quarrying basins of the Carrara district, that is, Torano, Miseglia and Colonnata. Such discrimination, extremely uncertain on the basis of the single techniques, may be performed with acceptable confidence’ using a properly selected subset of six petrographic, isotopic and spectroscopic variables. The final resubstitution and jackknifed re‐assignment rates are, respectively, 85% and 81%. Inclusion of the remaining five variables into the classification rule does not improve the results, but simply increases data overinterpretation. The practical possibility of using such an approach for more general provenancing problems is considered.     

PETROGRAPHIC AND ISOTOPIC CHARACTERIZATION OF THE MARBLE OF THE ISLAND OF TINOS (GREECE)*

Most outcrops of good‐quality crystalline marble in Mediterranean countries were exploited in Greek and Roman times. Hence, a wide variety of marble is now found in archaeological excavations. The precise determination of the provenance of a marble object is of great archaeological importance, and is now mostly obtained by coupling the petrographic study of a thin section with the analysis of the C and O stable isotopes, or by stereomicroscopy and EPR. The existing databases are considerable but still insufficient, because our knowledge about and study of ancient Mediterranean quarries remain incomplete. The contribution of this research is to add new petrographic and isotopic data on small quarries on the Greek island of Tinos that were exploited in antiquity. This marble belongs to the same geological horizon; it is quite pure, sometimes dolomitic and characterized by a low‐T, high‐P metamorphism that produced a limited recrystallization (MGS varying from 0.64 to 2.50 mm) on marine limestone protoliths. The petrographic features are quite distinctive: the fabric is strongly lineated and often stressed; and the accessory minerals are ubiquitary quartz, ore minerals, graphite and muscovite. As far as the isotopic data are concerned, δ¹³C_PDB varies from 1.1 to 2.7, and δ¹⁸O_PDB from ?1.7 to ?11.4. Both the features and the data have been compared with those of similar marbles used in antiquity, showing that their combination mirrors the fingerprint of the Tinos marble.     

ARCHAEOMETRY AT TEXAS A&M UNIVERSITY: CHARACTERIZATION OF SAMOAN BASALTS

The Elemental Analysis Laboratory provides research support for campus users and service analyses for the University, other state and governmental agencies and private industry. The laboratory's primary concern is the application of unique methodology to a wide range of analytical problems that arise in the course of efforts by University researchers. For the past decade or so, compositional analysis by neutron activation analysis of archaeological artefacts for the purpose of studying provenance, trade or cultural patterns of prehistoric populations has become an area of focus. The present communication will discuss the laboratory in general and the scope and significance of the archaeology work done within the organization. A brief example of a current project involving the study of geologic samples from prehistoric stone tool quarries from American Samoa is presented as an illustration.     

Reviews

Abstract

An analysis of a group of underglaze-painted stonepaste vessels produced in Bilad al-Sham (Greater Syria) is presented. Decorated in turquoise and black pigments under a colourless glaze, this ware was probably manufactured for a relatively limited period in the mid to late fourteenth century. The strong stylistic affinities exhibited in the underglaze painting and vessel profiles of the surviving corpus indicate that the bulk of the 'turquoise and black' ware was made by a single workshop. Comparisons are drawn with fourteenth-century decorated stonepaste wares recovered from excavations in Iraq. In the conclusion, it is speculated that Iraqi potters may have travelled west in the mid fourteenth century and established new workshops in Syria.     

ANCIENT EGYPTIAN LIMESTONE QUARRIES: A PETROLOGICAL SURVEY*

Ancient Egyptian limestone quarries in the Nile Valley occur in six geological formations of Palaeogene age. Samples were collected from 23 of the 48 known quarries, and analysed by thin-section petrography and X-ray fluorescence spectrometry. Results of the analyses show that the geological formations can be identified from rock texture and allochem types, and a plot of SiO₂/Al₂O₃ versus CaO/[CaO + MgO]. The application of these petrographic and geochemical parameters make it possible to determine the geographic provenance of limestone used in ancient Egyptian sculptures and monuments.     

THE ORIGIN AND GEOCHEMICAL CHARACTERIZATION OF RED OCHRES FROM THE TITO BUSTILLO AND MONTE CASTILLO CAVES (NORTHERN SPAIN)*

Ochres were the most common source materials for pigments used in Palaeolithic rock art paintings. This work analyses the petrographic and geochemical signatures of different ochre samples from outcrops inside Tito Bustillo Cave and the Monte Castillo Caves using the most common techniques (petrography, XRD, SEM–EDS and ICP–MS) in archaeological pigment characterization studies. The results obtained permit the identification and characterization of the different source ochre types and, furthermore, allow the establishment of mineralogical and geochemical proxies for the study of questions related to ochre characterization, formation processes and provenance.     

ON THE WHITE AND COLOURED MARBLES OF THE ROMAN TOWN OF CUICUL (DJEMILA,ALGERIA)

This paper reports the results of an archaeometric study of the local and imported marbles found in the Roman town of Cuicul (now Djemila, Algeria), a research project funded by the Sixth Framework Programme of the European Union. Of the few imported coloured lithotypes that have been found, four are of Greek origin and one was imported from Asia Minor. In addition, two other classical Roman coloured stones found on the site are probably of local North African origin (most likely one from Numidia and one from Algeria). With regard to the grey and white marbles employed in the statuary and architecture, petrographic study in thin section and the δ¹³C and δ¹⁸O isotopic data emphasize the frequent use of the local fine‐grained lithotype from Filfila (Skikda) together with imported Greek lithotypes (i.e., Pentelic marble, the dolomitic variety of Thasian marble, and Parian marble from Lakkoi) as well as different varieties of the so‐called ‘greco scritto’, whose provenance in some cases still remains uncertain. In fact, the petrographic and geochemical features of the marbles do not always match those known for the classical ‘greco scritto’ from the quarry of Cap de Garde, near Annaba (Algeria).     

The marbles of two early Christian churches at Latrun (Cyrenaica,Libya)

The provenance of twenty-seven architectural marbles from the two 6th century AD Christian churches of Latrun (Cyrenaica, Libya) has been established by discriminant function analysis of twelve isotopic, EPR and petrographic/morphological variables. Sixteen samples (59%) originate from Proconnesos, while 8 samples (30%) are assigned to the calcitic quarries of Thasos and 1 to the Docimium quarries near Afyon. The last two samples are of uncertain provenance and might be Proconnesian as well. These results demonstrate that the suggestion made long ago by Ward-Perkins that the presence on non-Proconnesian, possibly Thasian, marbles at Latrun was well founded. Particularly interesting is the strong correlation found between provenance and type of the architectural element sampled. Thasian marbles at Latrun were used exclusively for the manufacture of chancel screens. Seven out of nine screens sampled have this provenance, suggesting that the use of different materials is related to issues of work organisation and specialisation in different marble production centres.     

CHARACTERIZATION OF THE AMPHORAE,STONE BALLAST AND STOWAGE MATERIALS OF THE SHIPS FROM THE ARCHAEOLOGICAL SITE OF PISA–SAN ROSSORE,ITALY: INFERENCES ON THEIR PROVENANCE AND POSSIBLE TRADING ROUTES*

In December 1998, during excavation for the construction of a new building near San Rossore railway station in Pisa, the remains of ancient ships were discovered. These findings have been dated (radiocarbon) to between the end of the 10th century bc and the fifth century ad ( Belluomini et al. 2002 ). Several transport amphorae belonging to the Hellenistic ship, samples of rocks (stone ballast) belonging to ships B, D and the Hellenistic ship, and stowage materials belonging only to ship B have been analysed. The mineralogical and petrographic data of the investigated samples provided information on the possible provenance of the raw materials utilized in the manufacture of the ceramic amphorae, as well as on the provenance of the rock materials found in the ships as ballast and stowage. The compositional data (obtained through XRD, XRF, OM and EPMA) and their statistical analyses suggest that the provenance of the Dressel amphorae belonging to the Hellenistic ship was the Middle Tyrrhenian coast of Italy, and more precisely the area between Tarquinia and Naples, according to the numerous kilns and wine production sites found in this area. The provenance of the volcanic rocks was from southern Tuscany, northern Latium and possibly the Pontine Islands, whereas the intrusive rock possibly comes from the Calabrian–Tyrrhenian coast and/or the Peloritani area. The impure limestones and the dolostone come from southern Tuscany and the Latium coast; the semi‐metamorphic rocks could come from the coast of southern Tuscany, the Tuscan Archipelago or possibly also from the Ligurian coast; only the sample of mylonitized granitoid possibly comes from either the Calabria–Peloritani arc or the Tuscan Archipelago. The stowage materials, consisting of lapilli and scoria of a pyroclastic nature, are sourced from the Neapolitan area. These data might shed some light on the centres of production of the amphorae and of the trading routes followed by the ships, according to the ports of call.