THE ANALYSIS OF SECOND MILLENNIUM GLASS FROM EGYPT AND MESOPOTAMIA,PART 1: NEW WDS ANALYSES*

A recent analytical study by SEM–WDS was carried out on 226 glasses from the Late Bronze Age, analysing each of the glasses for a total of at least 22 elements, the largest such analytical study conducted on these glasses. The aim of the analysis was first to identify which elements were brought in with each of the raw materials and, second, to accurately characterize those raw materials. Since different glassmaking sites in Egypt and the Near East would probably use at least some local raw materials and these raw materials will vary slightly from site to site, this has potential for provenancing the glass. Analysis showed new patterns in the compositions of glass from the various sites and led to new conclusions about the supply of raw materials and personnel for the glass workshops. This forms the basis for further work by LA–ICPMS to be presented in part 2 of this paper.     

PROVENANCE OF OBSIDIAN EXCAVATED FROM LATE CHALCOLITHIC LEVELS AT THE SITES OF TELL HAMOUKAR AND TELL BRAK,SYRIA*

X‐ray fluorescence and laser ablation inductively coupled plasma mass spectrometry (LA–ICP–MS) analyses conducted on 40 obsidian samples from the Late Chalcolithic 2 levels at Tell Hamoukar and Tell Brak in north‐east Syria have shown trends towards the exploitation of obsidian sources in the eastern Taurus. While the Bingöl region appears to provide the majority of obsidian to both sites, there is also evidence of more minor exploitation of a source in the Lake Van area and an altogether unknown source (X). This paper presents the data acquired from the analyses of the archaeological obsidian and situates these results within their chronological and regional contexts.     

STAINING OF ARCHAEOLOGICAL GLASS FROM MANGANESE‐RICH ENVIRONMENTS*

It has been suggested that both internal and external sources of manganese may produce the black or brown staining that often occurs in buried archaeological glass. Modern potash glass of a manganese‐free medieval composition was scratched, etched and immersed in an aqueous solution containing dissolved manganese. After several weeks, immersion samples were sectioned and examined by SEM–EDX. Manganese was shown to be present in fissures and cracks within in the glass, where alkali had been depleted. Manganese from an external source is capable of blackening buried medieval potash glass.     

THE DETERMINATION OF BRICK PROVENANCE AND TECHNOLOGY USING ANALYTICAL TECHNIQUES FROM THE PHYSICAL SCIENCES*†

This work applies established analytical techniques from the physical sciences to Irish brick, in order to gather evidence of ceramic technologies, provenance and sources of raw materials. Petrographic microscopy, X‐ray diffractometry and scanning electron microscopy with an energy‐dispersive X‐ray diffraction attachment were used to study the brick of Rathfarham Castle, Dublin, built c. 1618, where clay brick was introduced in 1771. Local clay was fired in the laboratory and analysed in a similar manner. The petrography of the pointing mortar was studied in order to gather evidence of ceramic provenance. This paper concludes that the brick was hand‐ moulded with a silica‐based, predominantly non‐calcareous clay of glacial origin, gathered locally, including fluxes and a high percentage of non‐plastic material. The mineralogy and petrography of the brick, together with the presence of pebbles and a coarse matrix, suggest that the raw clay was probably gathered from a glacial deposit. The presence of abundant pebbles and colour inhomogeneities suggests a lack of processing of the raw clay. The brick was probably fired in clamps at top firing temperatures ranging from 750°C to above 900°C. Transformation of limestone temper involving the breakdown of calcite and the generation of calcium silicates, and the new formation of plagioclase, high‐temperature quartz, hematite and spinel were revealed. The presence of spinel in ‘hot spots’ indicates that fuel was added to the raw clay in order to assist firing.     

INSIGHTS INTO NORTH MESOPOTAMIAN ‘METALLIC WARE’*

With the aim of shedding new light on the still poorly understood North Mesopotamian metallic ware, ceramic and soil samples from Tell Beydar (northeastern Syria, third millennium bc ) were investigated using a range of analytical techniques, including optical microscopy, SR–XRD and SEM–EDX. The objective of this work was to differentiate calcareous metallic ware from non‐calcareous ware without the aid of chemical analyses and to find further validation of the existing hypothesis that the former group is an imitation of the latter. A third group of metallic wares from Tell Beydar is believed to be of non‐local, still regional origin.     

DECORATED ARCHAIC POTTERY FROM THE HERACLES SANCTUARY AT THEBES: A MATERIALS,TECHNOLOGY AND PROVENANCE STUDY*

Forty‐seven decorated samples of Archaic pottery excavated at a Heracles sanctuary (Thebes, Boeotia) were studied through a combined surface and body approach, using non‐destructive techniques. Most of the samples were archaeologically classified as Theban/Boeotian, others as Corinthian and a few as possibly Euboean. The techniques employed were optical microscopy and SEM–EDAX (micromorphology and compositional analysis of the surfaces) and XRF for the analysis of the ceramic body. The results provided information on the technological level of the collected pottery as well as on the relation of the chemistry and micromorphology of the pigments, aimed at assisting provenance studies.     

CHARACTERIZATION OF PLASTERS FROM PTOLEMAIC BATHS: NEW EXCAVATIONS NEAR THE KARNAK TEMPLE COMPLEX,UPPER EGYPT*

The aim of the present work is to characterize plasters from Ptolemaic baths recently discovered in front of the Karnak temple complex, by the excavations of an Egyptian–French team. The characterization was carried out by means of optical microscopy (OM), scanning electron microscopy (SEM) equipped with an energy‐dispersive X‐ray detector (EDS), X‐ray diffraction analysis (XRD) and Fourier transform infrared spectroscopy (FT–IR). The results allowed the identification of the chemical composition and structure of these plasters. In addition, samples of red, yellow, black and white pigments were examined and identified. The results helped in providing an image concerning some materials used during the Ptolemaic era in ancient Egypt.     

STONES FROM MEDIEVAL GLASSMAKING: A SUITABLE WASTE PRODUCT FOR RECONSTRUCTING AN EARLY STAGE OF THE MELTING PROCESS IN THE MT LECCO GLASS FACTORY*

The Mt Lecco glass factory was one of the most important production centres in Liguria (Italy) during the 14th and 15th centuries. Archaeological evidence indicates that the whole production cycle took place here. During the glassworking process, production defects such as ‘stones’ were identified and discarded. Stones are partially melted, glass‐coated relics of raw materials or fragments of crucible. The study of the microtexture of stones together with microprobe analyses of phases provides a key for understanding the glassmaking procedure carried out in the Mt Lecco glass factory. The melting rate can be inferred from the compositional variability of glass, which suggests fractional melting of the batch. Glass composition indicates that the Mt Lecco production was a mixed‐alkali one, probably made of quartz‐bearing material as vitrifying agents, plant ashes as fluxing agents and dolomitic limestones as stabilizing agents.     

RELATIONSHIP BETWEEN THE COLORATION AND THE FIRING TECHNOLOGY USED TO PRODUCE SUSA GLAZED CERAMICS OF THE END OF THE NEOLITHIC PERIOD*

Ancient decorated potteries from Susa (Mesopotamia) dating from 4200 to 3700 bc , were studied in order to determine the origin and the nature of the raw materials used, and to identify the technological processes applied to make the ceramic bodies and their decorations. Bulk compositions were determined by particle induced X‐ray emission (PIXE), while the microstructure and the mineralogical phases were studied using scanning electron microscopy (SEM), energy dispersive X‐ray analyses (EDX) and X‐ray powder diffraction (XRD). The results showed that the raw materials used to elaborate these potteries were similar for all the ceramic bodies (carbonates and iron and magnesium‐rich clays containing sand), and for all the decorations (iron oxides, silica, potassic and alumina sources). The variations of coloration of the ceramics and of their decorations were due to different firing temperatures. The ranges of firing temperatures used by potters were evaluated on the basis of mineral stability domains.     

THE PROVENANCE AND TECHNOLOGY OF NEAR EASTERN GLASS: OXYGEN ISOTOPES BY LASER FLUORINATION AS A COMPLEMENT TO STRONTIUM*

The ability to make rapid measurements on small samples using laser fluorination enhances the potential of oxygen isotopes in the investigation of early inorganic materials and technologies. δ¹⁸O and ⁸⁷Sr/⁸⁶Sr values are presented for glass from two primary production sites, four secondary production sites and a consumer site in the Near East, dating from Late Antiquity to the medieval period. δ¹⁸O is in general slightly less effective than ⁸⁷Sr/⁸⁶Sr in discriminating between sources, as the spread of measured values from a single source is somewhat broader relative to the available range. However, while ⁸⁷Sr/⁸⁶Sr is derived predominantly from either the lime‐bearing fraction of the glass‐making sand or the plant ash used as a source of alkali, δ¹⁸O derives mainly from the silica. Thus the two measurements can provide complementary information. A comparison of δ¹⁸O for late Roman – Islamic glasses made on the coast of Syria–Palestine with those of previously analysed glasses from Roman Europe suggests that the European glasses are relatively enriched in ¹⁸O. This appears to contradict the view that most Roman glass was made using Levantine sand and possible interpretations are discussed.     

A NEW SETTING FOR THE NORTHERN BORDER OF THE VENETI: METALLIC FINDS FROM THE VENETIC SITE OF MONTE CALVARIO,AURONZO DI CADORE*

In 2000 several bronze and lead objects were discovered at the Venetic‐Roman site (200 bc –ad 200) of Monte Calvario di Auronzo, in the Italian eastern Alps. They were mostly finished artefacts plus semi‐worked products. Analysis included SEM–EDS, EMPA, XRPD, TMS and AMS spectrometry. The compositional results of the finished artefacts suggest that the choice of the alloy had been made according to the decorative techniques to be used. A semi‐worked high‐leaded bronze object indicates the existence of a metallurgical production of cast artefacts at the site. TMS analyses of a lead ingot exclude local provenance, proving the existence of important trade routes.     

A STUDY OF GLASS BEADS FROM THE HALLSTATT C–D FROM SOUTHWESTERN POLAND: IMPLICATIONS FOR GLASS TECHNOLOGY AND PROVENANCE*

Eighty‐one samples taken from 68 glass beads found in southwestern Poland on sites of the Lusatian culture from the Hallstatt C and Hallstatt D subphases were analysed by EPMA. A subsample of 18 of these were additionally subjected to analysis by means of LA–ICP–MS in order to validate the results obtained by EPMA. Some glass was made using mineral soda and some using plant ash rich in sodium. Both high‐magnesium soda–lime glass (HMG) and low‐magnesium soda–lime glass (LMG) were identified. A large number of samples are characterized by low MgO content and medium K₂O content (LMMK glass), combined with low concentrations of CaO and high Fe₂O₃ and Al₂O₃. All the LMMK glass contains numerous silica crystals and inclusions composed of a number of elements (most frequently Cu, Co, Sb, As, Ag, Ni and Fe). The LMMK glass was presumably made in Europe during the Hallstatt C.     

NEOLITHIC ZOOMORPHIC VESSELS FROM EASTERN MACEDONIA,GREECE: ISSUES OF FUNCTION*

Five fragments of Late Neolithic clay zoomorphic vessels from northern Greece have been analysed for organic residues by gas chromatography – mass spectrometry. The results showed that the containers had been used in connection with a number of substances, in particular lower terpenoids, an oil or fat, possibly fossil fuel and in one case possibly beeswax. The paper considers likely interpretations of such combinations of materials in relation to possible functions of these symbolically enhanced artefacts. It appears that substances may have been used in the vessels because of their aromatic and/or medicinal and combustible properties, possibly in order to produce light, fragrance and/or smoke.     

DISCOVERY,PRODUCTION AND USE OF TIN‐BASED OPACIFIERS IN GLASSES,ENAMELS AND GLAZES FROM THE LATE IRON AGE ONWARDS: A REASSESSMENT*

Tin‐based opacifiers (lead stannate yellow and tin oxide white) were first used in glass production for a short period in Europe from the second to the first centuries bc , and then again throughout the Roman and Byzantine Empires from the fourth century ad onwards. Tin oxide was also used in the production of Islamic opaque glazes from the ninth century ad , and subsequently in enamels applied to Islamic and Venetian glasses from the 12th century ad onwards. A selection of published analytical data for the tin‐opacified glasses, enamels and glazes is summarized, and the methods used in their production are reassessed. The phase transformations occurring when mixtures of lead oxide, tin oxide and silica are fired are investigated with high temperature X‐ray diffraction (XRD) using a synchrotron radiation source, and these results are used to explain the observed differences in the glass, enamel and glaze compositions. Possible reasons for the use of tin‐based opacifiers in the second to first centuries bc , and for the switch from antimony‐ to tin‐based opacifiers in the fourth century ad are suggested, and the possible contexts in which tin‐based opacifiers might have been discovered are considered. The introduction of tin‐opacified glazes by Islamic potters in the ninth century ad is discussed in terms of technological transfer or independent invention.     

A CASE STUDY OF ARTHROPODS PRESERVED ON ARCHAEOLOGICAL BRONZES—MICRO‐ARCHAEOLOGICAL INVESTIGATION HELPS RECONSTRUCTING PAST ENVIRONMENTS

This paper offers new perspectives for improving our knowledge of arthropods in wet and aerobic archaeological contexts. The very‐near environment of uncleaned buried bronze artefacts, two ronde‐bosse ornaments of a Celtic grave from the Iron Age (275 to 250 bc , La Fosse‐Cotheret, Roissy‐en‐France), was studied by means of optical and scanning electron microscopies. Taking into account recent knowledge on bronze corrosion (decuprification), this micro‐investigation (micro‐archaeology) allowed identification of two fossilized arthropods—Cryptophagus sp. (Insecta, Coleoptera, Cryptophagidae) and Coccotydaeolus sp. (Acari, Tydaeoidea, Iolinidae)—which sheds some light upon the complex taphonomic process that occurred after the burial of a Celtic chariot. These first results support the idea that the local corroded metal/soil system has to be investigated for a better understanding of archaeological microenvironments. Efficient minute investigation of soiled bronzes could be performed prior to systematic cleaning of artefacts.