Different Preparation Techniques – Similar Results? On the Quality of Thin‐Ground Sections of Archaeological Bone

Palaeohistology as a valuable diagnostic instrument is dependent on the production of high‐quality thin‐ground sections from dry bone. The objective of this study was to consider technical differences and assess the qualitative outcomes of five techniques for preparing thin‐ground sections from dry archaeological bone. Established techniques with long follow‐up times and excellently documented results were compared with simpler and cheaper time‐saving techniques. Evaluations were made of the quality of thin sections obtained by one classical machine‐based embedding technique, two revised versions of the same technique, one manual moulding technique based on Frost's rapid technique and one manual hybrid technique. Five osteological specimens of differing quality were prepared following the manuals for these five techniques and examined microscopically with respect to a list of standardised histological and diagenetic parameters. Alterations in the specimens attributable to preparation effects were recorded, and observations were scored with reference to three criteria: section quality, technical quality and staining. The results show that embedding techniques are to prefer. Superglue should not be used as a mounting or embedding medium. Manual grinding comes with several limitations, and machine cutting and grinding are preferred. Haematoxylin staining can be successfully applied to embedded specimens, giving more information on microscopic diagenetic processes. A stepwise manual for a revision of the classical embedding technique is presented. The time required for producing sections using classical embedding techniques is shortened from 6 weeks to 3.7 days by refining the preparation/polymerization processes involved with no loss of osteological data. Copyright © 2014 John Wiley & Sons, Ltd.     

TESTING AN ALTERNATIVE HIGH‐THROUGHPUT TOOL FOR INVESTIGATING BONE DIAGENESIS: FTIR IN ATTENUATED TOTAL REFLECTION (ATR) MODE*

Archaeological bone undergoes alterations after burial (diagenesis) that constitute a problem for the survival of archaeological information. A common method to assess this alteration is Fourier transform infrared spectrometry (FTIR). However, the commonly applied method (FTIR–KBr) is destructive and sample preparation may influence the results. This paper tests the suitability of FTIR attenuated total reflection (FTIR–ATR), a method not commonly used to investigate bone diagenesis. FTIR–ATR requires less sample preparation and can be non‐destructive, allowing analysis of bone cross‐sections. Modern and archaeological bones were analysed using both methods and different sample preparation methods were tested. The results show that FTIR–ATR has advantages for the rapid assessment of bone diagenesis.     

Fixed or free book prices: is a hybrid system superior?

One of the main issues in the literature on the economics of books is whether or not a fixed‐price system is better than a free‐price system in providing a wide variety of cheap books. Although numerous studies have been carried out, this issue remains unresolved. Since 1962 Norway has had a fixed‐price system, regulated by a book trade agreement between the publishers’ and booksellers’ associations. On 1 May 2005, Bokavtalen, a new book trade agreement was introduced, representing a new step in a long‐term trend towards a less regulated book trade, and the price system is now actually a hybrid of fixed and free prices. The evaluation is mainly based on extensive use of multivariate regression analyses. Some of the results suggest that the hybrid price system is superior to the old one with regard to each of price, sales, reading and number of titles.     

IS THE ART MARKET MORE BOURGEOIS THAN BOHEMIAN?

Most research on the art market focuses on the high end, composed of auction houses and a few well‐known dealers. In this paper, we use a new database to examine the industry structure and location patterns of the New York art market, which consists largely of small, independent, relatively unknown galleries. We find that Manhattan galleries are highly spatially concentrated, and that clustering reflects both agglomeration economies and preferences over location‐specific amenities. New galleries are more likely to open in neighborhoods with existing gallery clusters, and proximity to other galleries increases establishment lifespan. New galleries also locate in neighborhoods with high population density and more affluent households, consistent with location models of luxury retail. The results are not consistent with the hypothesis that galleries locate in cheap, “bohemian” neighborhoods.     

Bridging the gap between forensic anthropology and osteoarchaeology—a case of vascular pathology

We report on two cases of similar bony lesions and emphasize the importance of cooperative work between forensic anthropology and forensic pathology. A fairly well preserved cadaver of an old woman was autopsied by a forensic team at the National Institute of Forensic Medicine in Portugal. Although age at death and sex were easily determined, there was insufficient other evidence for personal identification. However, the female revealed severe and extensive lesions in both lower legs and these were useful for determining personal identity. Here we describe the pathological findings, consistent with venous chronic insufficiency. The woman's family subsequently confirmed she suffered from this condition. Furthermore, they informed us of varicose ulcers, which also were suspected by the ties found, in both her legs, during autopsy. A long history of venous chronic insufficiency was subsequently found in her medical records. We compare these forensic findings to the bony pathologies of a male skeleton from the Coimbra Identified Skeletal Collection not previously diagnosed. We argue that these two cases represent the same pathological condition. Without the medical forensic work, the skeletal remains of the second case might not have been positively identified. The benefits of cooperative work between medical and anthropological forensic specialists are reinforced leading to resolution of otherwise unidentified skeletal pathological conditions. Copyright © 2004 John Wiley & Sons, Ltd.     

THE ANALYSIS OF DYESTUFFS FROM FIRST‐ TO SECOND‐CENTURY TEXTILE ARTEFACTS FOUND IN THE MARTRES‐DE‐VEYRE (FRANCE) EXCAVATIONS*

A series of Gallo‐Roman clothes and miscellaneous textile fragments from the first and second centuries from the Martres‐de‐Veyre necropolis (Puy‐de‐Dôme, France) was investigated. The objects studied were excavated between 1851 and 1923, during successive rounds of archaeological work. Since that time, they have been conserved in the Barguin Museum at Clermont‐Ferrand. The target of our research was dye identification, as it gives very interesting and useful information regarding the ancient technology. This approach has until now not been considered to be relevant and, unfortunately, is not systematic. The analysis was carried out by high‐performance liquid chromatography with photodiode array detection (HPLC–PDA). The small samples (threads up to 0.6 mg, less than 1 cm long) of coloured textile fibres were submitted to this technique. In one case, X‐ray fluorescence (XRF) analysis was applied. According to the analysis, the dyeing sources proposed are the Rubiaceae family for red, a luteolin ‘base’ for yellow, ellagitannins for brown and indigo for blue colours. Several samples did not seem to contain any dye. We point out possible factors for the partial dye source determination: instrumental limits, sample size, low dyestuff content in analysed samples and the dyes’ decomposition during ageing. Some improvements of dye analysis in archaeological samples by separation techniques based on recent analytical instrumentation and combined approaches are proposed.     

Growth of the Lichen Buellia albula and its Potential for Lichenometric Dating in South‐eastern Australia

Lichenometric dating is a cheap, relatively rapid means of dating rock surfaces, which has generally been overlooked in Australia. While lichenometry finds its greatest application in arctic and alpine geomorphological studies, there has been limited application to archaeological studies. This project set out to test the technique in south‐eastern Australia, and assess its usefulness for dating post‐settlement artefacts. The diameters of Buellia albula lichens growing on well‐dated memorials in the Bendigo cemetery were measured, and the relationship between age and lichen diameter established. The results indicate that B. albula can be used to determine the age of exposed cement surfaces from the 1890s to the present. The positive results suggest the technique should be investigated in other applications and environments in Australia, particularly where alternative dating techniques cannot be used.     

The Role of Pattern‐Welding in Historical Swords—Mechanical Testing of Materials Used in Their Manufacture

Pattern‐welding is a well‐known technique that was widely employed in the manufacture of swords. While the decorative effect of genuine pattern‐welding (employing phosphoric iron) is indisputable, to date its reinforcing effect is rather unclear. In order to understand this issue better, wrought iron, phosphoric iron, steel and various pattern‐welded samples were prepared and mechanically tested, and the results obtained are discussed in detail. Both the mechanical testing and the long‐term metallographic investigation of medieval swords suggest that pattern‐welding does not have any significant positive effect on the mechanical properties of swords and we should consider it a primarily decorative technique.     

Deformation of Ancient Buildings inferred by Terrestrial Laser Scanning methodology: the Cantalovo church case study (Northern Italy)*

The study of the health of a building connects humanistic and scientific research, and a complete characterization can be achieved by integrating all the available historical documentation, architectural and metrological studies, as well as laboratory and in situ analyses of the materials. A contactless, non‐invasive surveying technique such as terrestrial laser scanning (TLS) allows the acquisition of dense and accurate geometric and radiometric (electromagnetic measurements such as signal intensity) information about the observed surface of the building, which can be easily integrated with data provided by high‐resolution digital imaging. The early Christian Cantalovo church was surveyed for the first time in April 2011, by means of the ILRIS‐3D ER very long range scanner. The second and last survey was performed in June 2012, after the main shocks of the Emilia earthquake seismic sequence. A very long range instrument is suitable for fast, simple and independent measurements, due to its technical characteristics and, for this reason, is easily usable for accurate surveying in emergency conditions. The main results are obtained by applying a data analysis strategy based on the creation of TLS‐based morphological maps computed as point‐to‐primitive differences, which allow the creation of a deformation map and its evolution in time.     

The Potential of EBSD and EDS for Ceramics Investigations—Case Studies on Sherds of Pre‐Columbian Pottery

The work focuses on the potential of structural and chemical examinations by scanning electron microscopy based methods for archaeometric studies on ceramics. Achieved by a single preparation technique (polished block sections), the feasibility and benefits of electron backscatter diffraction are demonstrated as case studies using polychrome examples of pre‐Columbian pottery (Wari, Moche and Cajamarca). Elemental and phase maps allow for separate consideration of clay and temper. Identification of mineral phases and intergrowths of temper particles provide information for clarifying clay procurement and firing techniques with respect to local versus non‐local pottery to enlighten trade relations, technological transfer and shared heritage of pre‐Columbian cultures.     

X‐RAY SUB‐MICRON TOMOGRAPHY AS A TOOL FOR THE STUDY OF ARCHAEOLOGICAL WOOD PRESERVED THROUGH THE CORROSION OF METAL OBJECTS

Wood preserved in the corrosion layer of two early medieval iron objects was examined using X‐ray tomography. A state‐of‐the art multi‐resolution X‐ray tomography set‐up ( http://www.ugct.ugent.be ) provided virtual cross‐sections of the archaeological wood samples at sub‐micron resolution. These were compared with scans of samples of similar modern wood. These scans demonstrate the power of sub‐micron X‐ray tomography for wood identification, although the process of mineralization pushes this technique to its limits. Furthermore, this technique facilitated appraisal of the mineral content of the archaeological wood, which is useful in selecting the most appropriate strategy for the (preventative) conservation of the archaeological object.     

Formation of beach‐ridge plains: an appreciation of the contribution by Jack L. Davies

A robust debate among coastal geomorphologists as to the processes by which beach‐ridge plains around Australia have formed was initiated by a former President of the Institute of Australian Geographers. This review gives special consideration to the work of Jack L. Davies, whose academic contributions to coastal geomorphology in Australia have not always been appropriately acknowledged when explaining how similar plains have evolved elsewhere in the world. Davies recognised that relatively steep storm waves caused erosion (cut) on beaches, whereas less steep long‐period swell waves returned sand (fill). He considered the beach berm to be the nucleus on which a beach ridge formed, which could subsequently develop into a foredune, in contrast to cobble ridges that were deposited during storms. Offshore conditions regulate supply of sand to the shoreline, partly through effects on wave refraction, with higher rates of supply where the nearshore is shallow. It was apparent to Davies that the elevation of successive ridges might, but not necessarily, provide evidence of past changes of sea level, despite adornment by variable amounts of windblown dune sand. Morphodynamic understanding of long‐term coastal evolution, based on radiocarbon dating chronologies, has demonstrated that Australian coastal plains formed over the past ~6,000 years when sea level has been close to its present level, in contrast to several documented locations in the northern hemisphere where the sea has been rising for the past few millennia. Particularly insightful were observations by Davies that ridge formation could be influenced by a range of factors including changes in sea level, storminess, or sediment supply. These factors acting singly or in combination seem likely to change in the future. Understanding such responses remains a high priority and can be addressed by new technologies, such as light detection and ranging, optically stimulated luminescence dating, ground‐penetrating radar, and computer simulation.     

A Comparison of Spatially Varying Regression Coefficient Estimates Using Geographically Weighted and Spatial‐Filter‐Based Techniques

Geographically weighted regression (GWR) is a technique that explores spatial nonstationarity in data‐generating processes by allowing regression coefficients to vary spatially. It is a widely applied technique across domains because it is intuitive and conforms to the well‐understood framework of regression. An alternative method to GWR that has been suggested is spatial filtering, which it has been argued provides a superior alternative to GWR by producing spatially varying regression coefficients that are not correlated with each other and which display less spatial autocorrelation. It is, therefore, worthwhile to examine these claims by comparing the output from both methods. We do this by using simulated data that represent two sets of spatially varying processes and examining how well both techniques replicate the known local parameter values. The article finds no support that spatial filtering produces local parameter estimates with superior properties. The results indicate that the original spatial filtering specification is prone to overfitting and is generally inferior to GWR, while an alternative specification that minimizes the mean square error (MSE) of coefficient estimates produces results that are similar to GWR. However, since we generally do not know the true coefficients, the MSE minimizing specification is impractical for applied research.     

THE “ROUTINE‐SCAPE” AND SOCIAL STRUCTURALIZATION IN THE FORMATION OF JAPANESE AGRICULTURAL SOCIETIES

Recent archaeo‐botanical research has suggested that the introduction of farming did not immediately cause a sufficient shift in subsistence strategy to form an agrarian society but that the process took as long as hundreds of years. It is therefore suggested that it was not the farming technique in itself but the establishment of routinized day‐to‐day activity patterns and world views associated with farming that eventually led to the formation of a new social structure. The holistic concept of a dynamic day‐today routine and its associated physical and conceptual landscape is termed routine‐scape through which the process of agrarian society formation in Japan is examined around 1000–500 bce when paddy rice farming was introduced from China to Japan. A new crop storage system of a raised‐floor granary was also adopted as a part of the rice‐farming routine, which resulted in changing the Japanese routine‐scape. The community leaders increasingly associated the granary with both symbolic and practical significance; alongside controlling the storage‐related routine they finally gained centralized power. This paper indicates that agriculture brought along a new range of routine activities and their dynamic interactions with landscape produced new social structures.     

Testing the Efficiency of Simple Flakes,Retouched Flakes and Small Handaxes During Butchery

Handaxes, simple flakes and retouched flakes are three types of stone tools whose adaptive advantages are highly debated. Interpretations of these technologically different tools suggest that their adequacy for butchery is uneven. Although some experimentation has been made in this regard, further research is needed to understand which of these tool types are more efficient for butchery, thus granting adaptive advantages to the hominins who used them. The present experimental work shows that small handaxes provide higher return rates in butchery activities than simple and retouched flakes. Efficiency (measured in time) is significantly positive in handaxes compared to the other tools when defleshing. In contrast, when comparing the three stone tool sets (simple flakes, retouched flakes and handaxes), the return values obtained for disarticulation are very similar. This study also shows that cut marks do not occur randomly and are less stochastic than previously assumed. Defleshing leaves a preferential cluster of cut marks on mid‐shafts from long bones and even on these sections, depending on element type, patterns are statistically demonstrable.     

Taphonomic modifications produced by modern brown bears (Ursus arctos)

Actualism has been a fundamental tool in taphonomy. The knowledge of accumulation patterning of modern faunal allows us to interpret the activity of different actors in the archaeological record and to reconstruct the behaviour of preterit animals and humans in which we are interested. However, until now, there are few works that include bone modifications made by bears amongst those made by carnivores. Most data about bone modifications made by bears have been obtained from the archaeo‐palaeontological record. In most of these assemblages, the presence of bears is related to their period of hibernation. Therefore, in these contexts, the changes documented on recovered bear bones are associated only with cannibalism. In this paper, we present an actualistic study about modifications on bones made by modern brown bears. These animals can cause damage similar to those produced by other large carnivores. Generally, bear activity leaves slight damage, mainly on large‐sized animal bones. However, on bones of small‐sized animals and those of greater fragility, the bears can produce abundant damage. Though not usual, bears can break long bones and consume the complete epiphysis. This study suggests that bears have the potential to be agents of bone modification in fossil assemblages. Consequently, they should be considered as a possible agent of modification of faunal remains in the fossil record. Copyright © 2011 John Wiley & Sons, Ltd.     

Polarization and the growth of low‐skill service jobs in Spanish local labor markets

This paper analyzes the long‐term transformations of the occupational structure in 50 provinces of Spain with a view to ascertain the existence and assess the extent of employment polarization. The peculiar characteristics of this country, namely rigid labor markets and the relatively recent transition to democracy, make for an interesting addition to existing studies on this topic. In line with previous literature on other countries, we find a strong association between the decline of “routine” mid‐skill jobs and the expansion of low‐skill service employment as well as differential labor market outcomes by levels of formal education. Results are robust to various controls and instrumental variables that account for long‐term industry specialization. We also find a positive local multiplier effect of high‐skilled workers on the demand for nontradable service jobs.     

Age‐at‐death assessment using the os pubis and the auricular surface of the ilium: a test on an identified Asian sample

This paper reviews the results of blind tests of two morphological methods of age‐at‐death estimation. These tests were performed on a known age‐at‐death and sex sample taken from a collection of a Thai population. The first technique is based on the age related changes of the pubic symphysis according to the Suchey‐Brooks system, and the other concerns the metamorphosis of the auricular surface of the ilium elaborated by Lovejoy and colleagues. This is the first time that these methods have been tested on skeletal material from Asia. The results indicate that, for both methods, bias and inaccuracy increase with age and true age tends to be underestimated. As a consequence, age‐at‐death assessment based on these two techniques should be avoided on Asian archaeological series or forensic cases. Copyright © 2004 John Wiley & Sons, Ltd.     

Real‐time mud gas logging and sampling during drilling

Continuous mud gas loggings during drilling as well as offline mud gas sampling are standard procedures in oil and gas operations, where they are used to test reservoir rocks for hydrocarbons while drilling. Our research group has developed real‐time mud gas monitoring techniques for scientific drilling in non‐hydrocarbon formations mainly to sample and study the composition of crustal gases. We describe in detail this technique and provide examples for the evaluation of the continuous gas logs, which are not always easy to interpret. Hydrocarbons, helium, radon and with limitations carbon dioxide and hydrogen are the most suitable gases for the detection of fluid‐bearing horizons, shear zones, open fractures, sections of enhanced permeability and permafrost methane hydrate occurrences. Off‐site isotope studies on mud gas samples helped reveal the origin and evolution of deep‐seated crustal fluids.     

Provenance of Red‐Figure Pottery of the Classical Period Excavated at Olympia

Neutron activation analysis (NAA) has been applied to a set of red‐figure pottery fragments excavated in Olympia, in Elis: (a) to determine the provenance of these vases, since this is difficult by archaeological means, and the vessels might be local Elean or Attic, Corinthian or Italian products; and (b) to determine the characteristic elemental pattern of the clay paste prepared by the potters of this Elean region. Included for comparison are several Corinthian sherds excavated in Kyme, Italy, that are archaeologically classified as exports from Corinthia to Italy, and fragments of local Italian Corinthian imitations. The majority of the red‐figure vases were made locally in the north‐western Peloponnese and show the elemental pattern termed OlyA, which is represented in many vases and clay samples from this region that were known previously. It is not very different from the well‐known pattern of the north‐eastern Peloponnese (Argolid/Corinth) termed MYBE (Mycenae/Berbati), but can be separated by its lower Cs, Rb and K concentrations, as proven by many sherds from the Argolid and wasters from Berbati. Only a few red‐figure vessels are imports from Attica, but none come from Italy.