DNA in cremated bones from an early bronze age cemetery cairn

The discovery of polymeric DNA in charred wheat grains and other burnt plant remains prompted us to examine a set of cremated bones for the presence of ancient DNA. Extracts of cremated bones from an early Bronze Age cemetery cairn were analysed by hybridization probing and the polymerase chain reaction. Hybridization with two probes targeting human DNA resulted in strong positive signals. Polymerase chain reactions directed at a multicopy sequence in human nuclear DNA were successful, extracts of five burials giving amplification products of the expected size. Exploitation of ancient DNA in cremated bones could be of great value in archaeology as it may enable information pertaining to sex and kinship to be obtained from fragmented material.     

The life cycle of bronze age metalwork from the Thames

The high proportion of Bronze Age metalwork found in the Thames has aroused interest for many years, but all too little is known of the circumstances in which this material was deposited. Much of it is weaponry, but there are finds of tools as well. This paper examines the material found upstream of Teddington and considers its treatment before it entered the river. A high proportion of the artefacts had been used and some of them deliberately destroyed. There are marked variations in the selection and treatment of these artefacts along different lengths of the river and in different periods of the Bronze Age, but it seems likely that the proportion of fine metalwork that was deliberately damaged before it entered the river increased sharply over time.     

Provenance study of early and middle bronze age pottery from Kaman-Kalehöyük,Turkey, by heavy mineral analysis and geochemical analysis of individual hornblende grains

The provenance of Early Bronze Age and early Middle Bronze Age pottery produced between 2100 and 1970 B.C. and excavated from Kaman-Kalehöyük, Turkey was studied using mineralogical methods, including heavy mineral analysis and geochemical study of individual hornblende grains. The relative abundances of heavy minerals in the fabrics of 20 Early Bronze Age (EBA) and early Middle Bronze Age (MBA) pottery sherds, together with 27 local sediments collected within a radius of 25 km of the site were studied. The heavy mineral distributions in the Kaman region were statistically analyzed for consistencies in their occurrence. Amphibole was found to be the most abundant heavy mineral in most of the analyzed samples, followed by titanite and epidote. The amounts of other minerals such as garnet, clinopyroxene, and zircon are subordinate. Different proportions of heavy minerals in the fabrics allow categorization of the EBA and early MBA potteries into 5 groups. Comparative study of heavy mineral assemblages of local sediments and pottery suggests that half of the EBA and most of the MBA potteries were produced from sediment near the excavation site, whereas the other half of the EBA potteries were produced from sediment occurring at 25 km east or more east of the site. The geochemistry of individual amphibole grains was studied by electron-microprobe analysis. Most of the studied amphibole grains are calcic and aluminous, corresponding to hornblende. They can be further characterized into four types based on their chemical composition. The combination of heavy mineral identity and hornblende geochemistry provides diagnostic evidence for the origins of Kaman-Kalehöyük pottery. These and analogous heavy mineral techniques are effective archaeometric tools for determining pottery provenance.     

Radiocarbon dating of the bronze age bone pins from Eurasian steppe

Bone catapult and hammer-headed pins played one of very specific roles in funerary offerings in the Bronze Age graves uncovered in the Eurasian Steppes and the North Caucasus. Scholars used different types of pins as key grave offerings for numerous chronological models. For the first time eight pins have been radiocarbon dated. ¹⁴C dating of bone pins identified the catapult type pin as the earliest one. They marked the period of the Yamnaya culture formation. Then Yamnaya population produced hammer-headed pins which became very popular in other cultural environments and spread very quickly across the Steppe and the Caucasus during 2900–2650 cal BC. But according to radiocarbon dating bone pins almost disappeared after 2600 cal BC.     

The neolithic and early bronze age of the Lake Baikal Region: A review of recent research

Rich settlement and burial evidence from the Baikal/Angara region in Central Siberia provides one of the most promising opportunities in the global boreal forest for studying Holocene foragers. The Neolithic and Early Bronze Age prehistory of the region is known to western scholars only through a few English translations of the works of A. P. Okladnikov. Since the publication of Okladnikov's model, the region has witnessed large-scale archaeological fieldwork that has produced abundant quantities of new evidence. Moreover, the model has been partly invalidated by extensive radiocarbon dating. Research advances over the last couple of decades have augmented the area's previous reputation but have also revealed the need for new theoretical perspectives and modern analytical techniques.     

Looking for circular structures in post hole distributions: Quantitative analysis of two settlements from bronze age England

A statistical procedure is suggested for the analyses of hypothetical round-house plans among post hole patterns. The data are compared with an analogous random scattering of points and differences are noted. Plausible interpretations are contrasted with chance configurations to determine their strength. Single-link cluster analysis and statistical geometry are used. The emphasis throughout the paper is on data analysis rather than hypothesis testing.     

Synchrotron radiation-based x-ray analysis of bronze artifacts from an Iron Age site in the Judean Hills

Seven bronze bangles from Tell en-Nasbeh, northern Judah, were investigated to understand the phase composition and manufacturing process of the artifacts, and possibly suggest a provenance for their origin. Synchrotron x-ray radiation diffraction (XRD) and fluorescence (XRF) were used in the analysis to avoid any destructive sampling and at the same time penetrate through the surface into the core metal. These techniques enabled us to determine that the bangles were not just tin bronze, but leaded tin bronze. Based on excavation reports, it is unlikely that the metal objects were manufactured locally at Tell en-Nasbeh; rather, preliminary XRD and XRF data point towards the neighboring region of Edom as their origin. Despite their political enmity during the Iron Age II, the data suggest that Judahite social demands for bronze may have fostered a strong economic relationship between these two polities.     

The technology Of the yamnaya (pit grave) ceramic production And its relevance to the population history Of the volga-ural region in the early bronze age

Based on ceramic assemblages from the Yamnaya (Pit Grave) culture burials, the technology of pottery manufacture practiced by the Early Bronze Age people of the Middle Volga–Southern Ural region is described. The analysis follows the methodology developed by A.A. Bobrinsky. The results are used for reconstructing the origin and evolution of the Pit Grave culture. The role of ceramics in Early Bronze Age funerary ritualism is discussed.     

Trephination as a possible treatment for scurvy in a middle bronze age (ca. 2200 BC) skeleton

Although trephination of sub-adults in antiquity is rare, scurvy both infantile and adult, is even more rare in the archaeological record. Pathological changes appearing in the maxilla, mandible and orbits of a child of 8–9 years of age are highly suggestive of infantile scurvy. Advanced forms of this metabolic disturbance lead to severe subperiosteal haemorrhaging, at times turning the skin of the face and skull black. This condition may have led to the trephination along the sagittal suture as a form of blood letting in hopes of draining the subperiosteal haemorrhage in the cranium. Although cause and effect are often confusing in antiquity, the surgical intervention presented here led to the ultimate death of the child.     

Economic structures in Western Norway in the early iron age

In this issue of Norwegian Archaeological Review the book Økonomiske strukturer på Vestlandet i eldre jernalder (Economic structures in Western Norway in the Early Iron Age) by Knut Odner (1973 a) has been chosen as subject for discussion. The book is the second part of a major work on the settlement in a rock shelter called Ullshelleren in a Norwegian mountain valley; the first part of the publication (Odner 1969) has previously been reviewed and discussed in NAR (Myhre 1972, Bakka 1973, Odner 1973 b).

As an introduction to the discussion we reprint with a few editorial alterations the second part of Odner's article, Ecological settings for economic and social models (1972, pp. 637–649), previously published in Models in Archaeology edited by David L. Clarke. We are grateful to Mr. David L. Clarke and the publisher, Methuen &; Co. Ltd., for the permission to reproduce parts of this article.

Comments by Berta Stjernquist, Carl‐Axel Moberg, Gutorm Gjessing, Charlotte Blindheim, Heid Gj?stein Resi, Magnús Stefánsson and Axel Sommerfelt are followed by a reply from Knut Odner.     

“Copper people” of the bronze age: The reconstruction of their health and social status

“After you shall arise another kingdom inferior to you, and yet a third kingdom of bronze, which shall rule over all the earth” Dan. 2: 39 The Metal Age opened up new prospects for mankind and led to the emergence of a new category of professionals – miners, founders, smiths. With relation to the Bronze Age, these may be called “copper people.” The article explores new methods that can be used to identify their skeletal remains in museum collections. Based on biological data, certain aspects of the lifestyle of a male (presumably a smith) buried in an Abashevo collective grave at Pepkino, the Republic of Mari-El, Volga Federal District, and of other individuals buried in the same grave are reconstructed. Morphological, paleopathological, radiographic, and computer tomography examination of skeletal remains, as well as the results of histological, atomic absorption, and isotopic analyses of bone tissue provide information concerning diet, physiological stress, beginning of professional specialization, and the effects of heavy physical stress on their health status.     

Traditions and transitions in Korean bronze technology

Metallurgical examination of Korean bronze artifacts shows that a technical tradition based on casting and use of leaded high-tin alloys was established in Korea at the early stages of bronze use. After the subsequent discovery of quenching methods that suppress formation of the brittle δ phase, new thermo-mechanical techniques were introduced between the 7th and 10th centuries AD. Lead-free alloys were used, and tin contents near that of the peritectic point in the Cu–Sn phase diagram were chosen. Leaded high tin alloys continued in use, but only in cast objects, and with significant composition variation. The unique conditions during the time of innovation suggest that the transition to new metallurgical techniques was gradually achieved through domestic technical innovation inspired by external influences.     

SEM and electrochemical characterization of bronze artifacts from the Francavilla archaeological site

The excavations in the necropolis of the Francavilla Marittima archaeological area, in Calabria, have brought to light the rich burial artifacts and materials, dated between the end of the ninth and sixth centuries BCE. SEM/EDS analysis was conducted on some sections taken from a bronze artifact classifiable as an armilla or fibula fragment. Our aim was to elucidate the nature of the corrosion processes acting on the specimen. SEM investigation detected the segregation of tin towards the outer layer and a depletion of the copper content in the same region. Furthermore, the elemental distribution maps of the sections analyzed evidenced the presence of chloride ions in the border area between the corrosion patina and the metal alloy. Such anion migration of chloride ions into the interior of the alloy leads to a particular variant of the type of corrosion of structure that in the literature has been identified as structure I.A cavity electrode designed for electrochemical measurements of powders was used to perform cyclic voltammetry experiments devoted to explore the activity of the patina covering the surface of the bronze fragment. The surface layer consists mainly of tin and tin oxides; the layer immediately beneath it contains copper oxides. An increase of reactivity was shown in an acidic environment. The activity of the patina is greatly reduced at pH 5 and appears to be zero at neutral pH.     

Microscopic study of Chinese bronze casting moulds from the Eastern Zhou period

Piece mould casting technology, as a hall mark of the central plains of China during the Bronze Age, has attracted scholars' interest globally. Bronze ritual vessels found in this area were produced in large quantities and generally cast with the moulds composed of three or more sections. This enormous industry certainly required workers to have had professional knowledge to ensure the success of every single cast. Mould making technology was one of its most important parts. This research looks into the microstructure of bronze casting moulds of the Eastern Zhou period, which was a rarely studied topic in previous research. Through comparison with local pottery, it is shown that casting moulds in this period were produced with quite specialized sand-rich material, and clay was only a minor component. It is then discussed how this unique material can be beneficial to the bronze casting process and how this technology was integrated as a crucial part of the Chinese bronze casting system. These analyses might be able to portray mould makers in the ancient bronze foundries as a group of specialized people with their own traditions and professional knowledge.