Putting the Spotlight on Small Metal Age Pottery Scatters in Northern Calabria (Italy)

This paper presents the results of an in-depth multidisciplinary restudy of small Metal Age surface scatters recorded in earlier fieldwalking surveys in northern Calabria (Italy). Guided by a stratified sampling approach based on site types and topographic positions, high-resolution surface collections at the selected sites were combined with geophysical surveys, test pits, and soil studies to investigate both archaeological deposits and the site formation processes that have an effect on their detectability. This approach is shown to result in a better definition of archaeological ‘sites’, and to help fill in details of regional exploitation and settlement dynamics at the landscape scale. At this broader scale we are also able to model post-depositional processes and slope dynamics affecting the preservation of the archaeological record. With regard to methodology, our study has enabled the evaluation of diverse archaeological detection methods and the fine-tuning of field strategies for the study of Metal Age remains.     

Tools for Predicting Damage to Archaeological Sites Caused by One-Dimensional Loading

Tools are developed to predict damage to archaeological remains caused by the construction of line infrastructure on soft soil. They are based on numerical modelling and laboratory testing supported by X-ray microcomputed tomographic observations, and micromorphological analyses of thin sections. They have been validated for one-dimensional (1D) loading at two sites in the Netherlands where soil has been placed on top of organic layers rich in ecofacts and overlaying Pleistocene sands.

Numerical prediction of the deformation of soft layers underneath an embankment remains a challenge for geo-technical engineers. Errors on surface settlement prediction reach ±15% of the measured total settlement.

Laboratory observations show that vulnerable artefacts can get crushed when packed loosely in pure assemblies under 1D loading equivalent to less than 5 m of sand. Fragmentation is assimilated to loss of archaeological value as it compromises recovery during sieving. Embedment in a sandy or a very compressible organic matrix has a beneficial effect on the resistance of ecofacts. Embedded ecofacts can resist a load of more than 12 m of sand. Flattening and re-orientation of soft plant remains occur during 1D loading without microscopic damage of tissues.     

Attempts at thermoluminescence dating of fired materials from the Przeworsk Culture settlements

The thermoluminescence (TL) dating method has a significant measurement error margin reaching almost 10%. Due to this fact it could be considered as little effective in case of such sites from the Roman period as burial grounds with many artefacts useful for archaeological dating. However, for many settlements from this period, where pottery is the only kind of artefacts, the TL method can give notable results. The main purpose of the study was to make an attempt at TL dating of pottery and clay daub samples from the Nieszawa Kolonia and Kręcieszki sites and to compare the obtained dates with the results of archaeological dating of selected features from the Przeworsk Culture settlements. In the Kręcieszki site the fragments of burnt clay daub were dated by the TL method for the first time in the Lublin laboratory. It turned out that clay daub is an equally good dating material as pottery. It can be found that the TL dating of pottery from Nieszawa Kolonia confirms two stages of settlement. The first settlement stage is related to the phases B2-B2/C1-C1a of the Roman period, i.e. from the beginning of the 2^nd to the beginning of the 3^rd century. The second group of TL dates corresponds to the phases C2D that is to the second stage of settlement, from the second half of the 3^rd century to the half of the 5^th century AD. The results of TL dating of pottery and clay daub in the Kręcieszki site are rather similar and correspond to the phase B1/B2 of the period of Roman influence, determined from pottery style, but can also indicate the phase B2/C1.     

Neanderthal settlement patterns in Crimea: A landscape approach

Traditional settlement pattern analysis involves classifying sites within a region using previously established functional categories. Faunal and lithic data are frequently combined as archaeological indicators of site function. The results are interpreted in terms of a settlement system from which inferences about mobility patterns and social organization are drawn. The previously published site of Karabi Tamchin is used here as a spring-point for a discussion of the problems inherent with established site typologies and some of the settlement models that have been proposed in the past. The rich Middle Paleolithic archaeological record of Crimea is used to demonstrate the usefulness of the landscape approach as a means of supplementing existing information about Middle Paleolithic settlement patterns.     

Combining photogrammetry and laser scanning for the recording and modelling of the Late Intermediate Period site of Pinchango Alto,Palpa, Peru

This paper describes the 3D modelling of Pinchango Alto, Peru, based on a combination of image and range data. Digital photogrammetry and laser scanning allow archaeological sites to be recorded efficiently and in detail even under unfavourable conditions. In 2004 we documented Pinchango Alto, a typical site of the hitherto poorly studied Late Intermediate Period on the south coast of Peru, with the aim of conducting spatial archaeological analyses at different scales. The combined use of a mini helicopter and a terrestrial laser scanner, both equipped with a camera, allowed a fast yet accurate recording of the site and its stone architecture. In this paper we describe the research background, the 3D modelling based on different image and range data sets, and the resulting products that will serve as a basis for archaeological analysis.     

Image‐Based Modelling from Unmanned Aerial Vehicle (UAV) Photogrammetry: An Effective,Low‐Cost Tool for Archaeological Applications

The recording and 3D modelling of complex archaeological sites is usually associated with high capital and logistical costs, because the data acquisition must be performed by specialists using expensive surveying sensors (i.e., terrestrial laser scanners, robotic total stations and/or ground‐penetrating radar). This paper presents a novel, low‐cost, user‐friendly photogrammetric tool for generating high‐resolution and scaled 3D models of complex sites. The results obtained with unmanned aerial vehicle (UAV) photogrammetry of an archaeological site indicate that this approach is semi‐automatic, inexpensive and effective, and that it guarantees quality.     

Immersive Visualization and Curation of Archaeological Heritage Data: Çatalhöyük and the Dig@IT App

Advanced data capture techniques, cost-effective data processing, and visualization technologies provide viable solutions for the documentation of archaeological heritage and material culture. Work at the UNESCO World Heritage site of Çatalhöyük has demonstrated that new digital approaches for capturing, processing, analyzing, and curating stratigraphic data in 3D are now feasible. Real-time visualization engines allow us to simulate the stratigraphy of a site, the three-dimensional surfaces of ancient buildings, as well as the ever-changing morphology of cultural landscapes. Nonetheless, more work needs to be done to address methodological questions such as follows: can three-dimensional models and stratigraphic relationships, based on 3D surfaces and volumes, be used to perform archaeological interpretation? How can a 3D virtual scenario become the interface to cultural data and metadata stored in external online databases? How can we foster a sense of presence and user embodiment in the simulation of ancient cities and archaeological sites? This article aims to provide viable solutions to the methodological challenge of designing a comprehensive digital archaeological workflow from the data acquisition and interpretation in the field to a three-dimensional digital data curation based on interactive visualization, searchable 3D data, and virtual environments. This work describes the results we achieved developing the application Dig@IT, a multi-platform, scalable virtual reality tool able to foster archaeological data analysis, interpretation, and curation in a realistic and highly interactive virtual environment.     

Spatial and temporal variety of prehistoric human settlement and its influencing factors in the upper Yellow River valley,Qinghai Province,China

We report an investigation of forty-two prehistoric sites in the upper Yellow River valley located in Guide, Jianzha, Hualong, Xunha and Minhe, Qinghai Province, China, including forty-four new radiocarbon dates from twenty-four sites, review published archaeological surveys and radiocarbon dates, analyze landform features and discuss the reasons for spatial and temporal variety of regional prehistoric human settlement. Our results suggest that people occupied the upper Yellow River valley during the early Holocene, but a continuous archaeological record begins only after about 5500 Cal yr BP. Thereafter, the intensity of prehistoric human settlement in the area is varied. Neolithic human settlement spread northwestward to high altitude areas of the upper Yellow River valley during early-mid Majiayao and Qijia periods, but moved southeastward to lower locations in the area during late Majiayao period. During the Bronze period, two coeval archaeological cultures, the Kayue and Xindian, occupied the upper Yellow River Region. Kayue archaeological sites are numerous and widely distributed in the high areas of the upper Yellow River, while Xindian sites are restricted to the lowest basin of the region. Variation in site density and location are likely the result of changing paleoclimate and technology.     

The Antiquities Market

Abstract

The fluting of Early Paleo-Indian bifaces and associated failure rates have received considerable archaeological attention—perhaps at a scale exceeding its comparative importance. Nonetheless, if we are to properly evaluate explanations of the origins and purpose of fluting and the function of particular sites in Paleo-Indian settlement systems, estimates of failure rates are required. To date, such estimates have been based largely on experimental replication and rarely on a1Achaeological data, and it is suggested the experimental estimates are inaccurate. In order to overcome these problems, three interrelated, yet independent, methods of estimating fluting failure rates from archaeological data are developed and applied to data from the Parkhill site in Ontario and the Windy City site in Maine. The consistency in the results obtained by these methods inspires faith in their relative accuracy. The results suggest failure rates, at least at these sites, were not on the scale often assumed by previous investigators, being on the order of only 10–15% or less.     

Making Better Use of Monitoring Data

This paper addresses the knowledge gap that exists in relation to understanding and quantifying the sensitivity of organic-rich archaeological deposits with respect to changes in the soil environment. Based on two case studies we demonstrate that it is possible to quantify the current decay rate in unsaturated archaeological deposits by combining decay rates measured in the laboratory with on-site monitoring data in a simple decay model. The decay of organic archaeological deposits is highly sensitive to variations in soil temperatures and soil water content. Measurements of soil water content cannot always stand alone as a representative measurement of oxygen availability; which suggests that in situ measurements of oxygen content or redox potential are needed in order to understand the preservation conditions at a site. The results of this study emphasize the advantage of combining monitoring data with laboratory studies, in order to document in more detail where and when degradation takes place.     

Archaeological Site Information Modelling and Management Based on Close-Range Photogrammetry and GIS

New challenges in management and restoration of archaeological sites require the utilization of advanced technologies and systems to assist in preserving the important legacy of human heritage. These challenges include monitoring and preserving of site landscapes, maintenance and rehabilitation of archaeological structures, and quality and safety management. In this research, an integrated methodology based on photogrammetry and Three-Dimensional (3D) Geographic Information System (GIS) is developed to capture and model essential details needed for the proper management of archaeological sites. Recent advances in digital imagery and modelling utilize photogrammetry as an efficient technique for 3D modelling of archaeological sites to derive accurate measurements of size, shape, position, and texture of objects using two-dimensional digital photographs. Spatial data that include aerial stereo photographs, satellite images, close-range photos, terrestrial surveying and Global Positioning Systems (GPS) are integrated within the design of the proposed model. The approach is validated with a case study of Ajloun Castle, one of the ancient and important preserved structures located in Jordan. Various sequential levels of details have been developed for the castle: Orthophoto, Digital Elevation Model (DEM), structures geometry and site layout and 3D textured model. The suggested methodology is expected to be efficient in modelling and documenting archaeological structures. The developed model is utilized to assess the management of archaeological structures through feasibility analysis, rehabilitation decisions, and safety planning.     

Multi-element soil prospection aiding geophysical and archaeological survey on an archaeological site in suburban Sagalassos (SW-Turkey)

In order to take full advantage of the archaeological information contained within buried archaeological sites, it is important to apply an integrative approach combining complementary prospection methods. In this study, geochemical prospection data are combined with archaeological and geophysical survey results on an unexcavated site in suburban Sagalassos (SW-Turkey), with the aim of obtaining better insights into the structural shapes and past functionalities of the area. Spatial and multivariate statistical analyses of the chemical data reveal anomalies of K, P and Zn on a location where archaeological and geophysical results suggest the presence of ceramic producing kilns. These elemental enrichments are thought to result from burning wood or dung as fuel for the detected kilns. In addition, local anomalies of Co, Cr, Fe, Mg, Mn and Ni were found to reflect the working and storage of ophiolitic clays, employed as a raw material for ceramic production. Radiocarbon dating of charcoal in a 2.5 m deep drill core in this zone provides ages between AD 120 and 350 at depths of 50 and 60 cm. Al, As, Ba, Ca, Na, Sr, Ti and Pb are considered geogenic elements in this study. The present study supports the theory that geochemical prospection holds potential as a surveying technique, as it was found that chemical data facilitate the interpretation of structures detected by geophysical and archaeological methods, thereby creating an extra dimension to the interpretation of survey data. The results further argue in favour of using strong-acid extractions and the consideration of a large suite of elements when applying chemical soil survey as an archaeological prospection technique, and highlight the importance of considering site lithology. Multivariate statistics proved to be invaluable in distinguishing anthropogenic from lithological soil patterns.     

The potential of chironomid (Insecta: Diptera) larvae in archaeological investigations of floodplain and lake settlements

The head capsules of chironomids (Insecta: Diptera) are well preserved in sediments and can be recognised to a high taxonomic level, usually genus and sometimes species. Work on lake sediments has shown that they can be accurate indicators of water temperature, oxygen regimes, and nutrient status (particularly total phosphorus and chlorophyll-a), as well as heavy metal pollution. No systematic chironomid analyses, however, have previously been undertaken on archaeological deposits. In order to address this we assessed the use of chironomids in three types of archaeological deposit; firstly, a lake core at the edge of a lake settlement (crannog), secondly, a palaeochannel infill adjacent to a multi-period settlement site and lastly, a Roman well deposit from a floodplain environment. The chironomid assemblages are shown to vary significantly both between and within the sites and reflect the immediate environment and the adjacent area. The lake sediment assemblage reflects the construction of the crannog through elevated levels of organic detritus, wood and woody debris. The palaeochannel assemblage reveals changing natural conditions and nutrient enrichment probably associated with settlement during the Saxon period. The well assemblage is taxonomically restricted and indicative of organic debris, dead plant material, animal dung and possibly human effluent deposited after abandonment of the well. Dry storage of the palaeochannel and well sediments for several years did not appear to affect the concentration or state of preservation of the head capsules. The chironomid reconstructions are shown to provide an additional indicator of human activity which has the potential to provide quantitative data on the character of aquatic environments associated with archaeological sites.     

Under the Boards: Archaeological Site Formation Processes at the Commissariat Store, Brisbane

The study of archaeological site formation processes, although routinely undertaken for prehistoric sites, is only carried out in historical archaeology in a limited way. Understanding the processes which formed the archaeological record of a site is an important first step towards developing justifiable inferences about past behavior and past societies regardless of the age of the site. This paper identifies and examines the cultural and non-cultural processes that formed the archaeological record at the Commissariat Store, Brisbane. The history of the site, from its construction in 1829 as part of the Moreton Bay penal settlement to the present, is examined and the expected impacts and processes on the archaeological record are identified. Archaeological evidence from the salvage excavation of the site undertaken in 1978 and 1979 is analyzed to identify the cultural and non-cultural site formation processes. This study identifies the presence of cultural formation processes including discard, loss, abandonment and re-use from an examination of the historical and archaeological evidence. Non-cultural formation processes at work in the site include faunalturbation, floralturbation, flooding, and aquaturbation.     

河南灵宝市五帝遗址考古勘探报告

2018年11月~12月,为从聚落层面对灵宝盆地仰韶文化时期大型遗址开展研究,河南省文物考古研究院等单位对灵宝五帝遗址进行了系统调查与勘探。结果表明,该遗址主体是一处仰韶文化中期大型聚落,南部有一条南壕沟,并发现一定数量的房址、灰坑,总面积约75万平方米。在遗址东北部还发现有庙底沟二期文化时期遗存。另外,调查发现该遗址附近有古湖相沉积,对研究该区域古环境变迁具有重要价值。     

Some spatial analyses of Chalcolithic settlement in Southern Israel

This paper is a brief investigation of one of the outstanding problems in Chalcolithic archaeology in the Negev desert of Israel: that of the spatial distribution of sites and the possible relationships between these sites that may be inferred. Although the region is rich in archaeological data for the Chalcolithic period, very little work has thus far been undertaken in terms of the quantification of the archaeological data – a necessary prerequisite for complex spatial analysis. Nevertheless, simple analysis of settlement patterns using the data presently available for 403 Chalcolithic sites in the Negev is given as an example. Autocorrelation tests measuring clustering and dispersion of sites show that the overall impression of clustering is a factor of access to farming land, water, grazing and Mediterranean maquis, but that smaller scale analysis suggests that settlement patterns were essentially random. This makes it difficult to argue in favour of settlement hierarchies or structured settlement of any kind.     

Recovering traditions in the digital era: the use of blimps for modelling the archaeological cultural heritage

Driven by progress in sensor technology, algorithms and data processing capabilities, the recording and 3D virtual modelling of complex archaeological sites is currently receiving much attention. Nevertheless, the problem remains the huge effort and costs that have to be invested to obtain realistic models. Besides on-site measurements, much time is often spent in manually rebuilding the whole site with a CAD package or a 3D-modelling tool.     

3D model of the Can Sadurní cave

Graphic and metric information about the site and its environment and about the different structures and artefacts located are indispensable for the optimal management of an archaeological excavation. A Geographic Information System (GIS) proves useful in managing and analysing information and data obtained from different sources. Two techniques of data capture, Terrestrial Laser Scanning (TLS) and close range photogrammetry, are used to generate accurate and high-resolution 3D models of a cave, the silos and a combustion structure at the Can Sadurní site (Begues, NE Spain). This site is especially noteworthy on account of its complete stratigraphy of the Catalonian Holocene. The capture and processing of the photogrammetric and TLS data used to generate 3D models are discussed in detail. These models cannot be obtained by classic archaeological techniques since the record is made layer by layer, approximately one decimetre apart, with the result that the information between the layers is lost. Our findings highlight the potential of these techniques for obtaining accurate and photorealistic models that facilitate a complete analysis of the available information at an archaeological site.     

Estimating parent population of pottery vessels from a sample of fragments: a case study from inter-tidal surface collections,Roviana Lagoon,Solomon Islands

Archaeologists frequently interpret the duration and type of prehistoric occupation at a location/site from the relative abundance of prehistoric materials (accumulations research). Taphonomic factors have the potential to alter substantially the archaeological record leading to inaccurate assumptions about the nature of prehistoric settlement. Where vessel families of potsherds can be established, we provide a general method to estimate the parent population from which the sample of sherds derives, through analysis of vessel completeness of the sample. This provides a basis for archaeological interpretation of the scale of discard represented at a location. The approach used has broad applicability to many archaeological settings where behavioural inferences are made from poorly preserved ceramic samples. Statistical analysis of a ceramic assemblage from Roviana Lagoon stilt villages indicates that most of the ceramic assemblage has been destroyed over time. An unexpectedly severe taphonomic regime is inferred for this relatively sheltered landlocked lagoon setting. Rather than marking an ephemeral occupation, estimating a parent ceramic population indicates instead that early stilt village sites in the Solomon Islands region were probably permanently occupied for several centuries. Results also suggest that the relative absence of recorded Lapita sites in the main Solomon Islands, and possibly elsewhere in Near Oceania may be a result of a harsh taphonomic regime for the remains of stilt village occupation.