Microwear study of quartzite artefacts: preliminary results from the Middle Pleistocene site of Payre (South-eastern France)

Preliminary functional results obtained from the quartzite assemblage of the Early Middle Palaeolithic site of Payre (South-eastern France) are presented. In an area rich in flint, hominins at Payre also collected quartzite in their local environment, specifically along the Rhône River banks. Although the Payre lithic assemblage is largely composed of flint, quartzite was introduced in the site mainly as large cutting tools knapped outside. This fact pointed out an apparently highly differential treatment of the raw material types available in the region. A major concern is to understand the reason why. Is there any functional reason for the introduction of those artefacts, perhaps to perform specific activities related to the toughness of quartzite? Or is there any functional differentiation among the various raw materials? Use-wear analysis is a useful tool for better understanding human technological choices and strategies of lithic raw material management. Before attempting to extensively apply use-wear analysis on the quartzite assemblage, we analysed a limited sample to evaluate the general surface preservation. A specific experimental programme with the same local quartzite was carried out in order to provide a reliable comparative reference for interpreting use-wear evidence on archaeological implements. Methodological difficulties related to use-wear analysis applied to quartzite artefacts are also discussed. Both Optical light microscopy (OLM) and Scanning Electron Microscopy (SEM) were employed in this study; however, interpretations were elaborated considering principally SEM micro-graphs.The analysis of the archaeological material showed a good state of preservation of the surfaces with a low incidence of post-depositional alterations. The documented use-wear allowed us to identify the active edges, the kinematics and, more rarely, the worked material. Chopping activities were documented on two large artefacts suggesting a specific utility of those tools.     

Neanderthal Shell Tool Production: Evidence from Middle Palaeolithic Italy and Greece

The vast majority of tools recovered from Palaeolithic sites are made of stone varieties. Only rarely do non-lithic implements come to light, let alone tools produced on marine mollusc shell. Interestingly, a good number of shell implements made on Callista chione and Glycymeris sp. valves have been reported from 13 Middle Palaeolithic (Mousterian) sites in southern peninsular Europe. Of these, more than 300 specimens display evidence of deliberate edge retouch. They are all considered products of Neanderthals and date from ~110?ka BP to perhaps ~50?ka BP. In this paper, we review the evidence for Mousterian shell tool production in Italy and Greece??the only two countries in which such tools have been securely identified??and present experimental results obtained in the effort to understand the production process and typo-functional role(s) of the artefacts. We examine the general provisioning pattern of raw materials, as well as the typological, species-related and chronological data pertinent to the production of shell tools by Neanderthals. The data suggest that the Mousterian shell scrapers are a response to poor availability of lithic raw material in the areas of occurrence, and may be best described as an extension of chipped stone technologies to specific types of marine shell, their form defined by an existing mental template. As such, they constitute evidence for refined adaptation strategies and advanced provisioning of resources amongst Neanderthals, and may lend further support to the idea that these hominids displayed a degree of complex behaviour.     

Hafted armatures and multi-component tool design at the Micoquian site of Inden-Altdorf,Germany

Excavation of the Micoquian site Inden-Altdorf (Weisweiler-124) near the former German capital Bonn in western Germany has revealed the first valid open-site habitation features with hut-like structures and associated hearths for the Middle Palaeolithic in Central Europe. It has been dated to the Eemian interglacial (OIS 5e), a warm interglacial between 128 and 115 ka BP. Various wear traces and especially organic residues have been detected on a large number of stone tools using microscopic use-wear analysis of lithics recovered from the site. A multi-level analysis developed through an experimental framework and archaeological study using optical light microscopes, scanning electron microscopes and energy-dispersive X-ray microprobes identified the adhering residues as birch pitch. Birch pitch is the oldest synthetically produced material and was used as an adhesive to attach lithic implements to wooden shafts. While such hafting technology is commonly associated with modern humans in the Upper Palaeolithic, the birch pitch residues found on the Micoquian tools of Inden-Altdorf suggest that hafting technologies and the frequent use of multi-component tools already existed in the Middle Palaeolithic, c. 120 ka BP in central Europe.     

Trampling vs. Retouch in a Lithic Assemblage: A Case Study from a Middle Stone Age Site,Steenbokfontein 9KR (Limpopo,South Africa)

At the site of Steenbokfontein 9KR, virtually 80% of the lithic blanks presented retouch—an extreme proportion for Middle Stone Age assemblages. The high percentage of putative retouch led us to investigate whether post-depositional processes played a role in the preservation of the lithic assemblage. We designed and performed an experiment that reproduced all the archaeological conditions inferred from the site formation analyses to determine if the archaeological assemblage was trampled or retouched. We defined several qualitative attributes and studied both trampled and retouched experimental samples, and compared them to the archaeological material. We subsequently performed different statistical analyses and a correspondence analysis with all the macro qualitative attributes that we defined. We were then able to discern which attributes were the most eloquent variables and assess the usefulness of a multivariate analysis in discriminating between trampling and retouch.     

Thermoluminescence dates for the Middle Palaeolithic site of Chez-Pinaud Jonzac (France)

Thermoluminescence dating of heated flint artefacts from the Middle Palaeolithic sequence of Chez-Pinaud Jonzac (France) places an assemblage of Quina type Mousterian into MIS 4, while the overlying assemblage of Denticulate Mousterian which is followed by two layers with Mousterian of Acheulean Tradition are all assigned to MIS 3. TL dating is used to verify the mixed nature of deposits from which diagnostic Middle as well as Upper Palaeolithic tools were recovered. The TL ages are significantly different for samples from this layer and broadly agree with the archaeological attributions. While the study is generally limited by the low number of heated samples available, a correlation with a generalized chronostratigraphic sequence is possible by including proxy data from the faunal remains associated with the lithic assemblages in question. The Quina Mousterian in southwestern France, therefore, can be placed by chronometric dating methods in MIS 4 to MIS 3.     

Using lithic assemblage formation to approach Middle Palaeolithic settlement dynamics: El Salt Stratigraphic Unit X (Alicante,Spain)

The superposition of anthropogenic remains usually results in archaeological palimpsests, hindering an accurate characterization of the behavior underlying such remains. Aimed at facing this methodological constraint in the study of Palaeolithic contexts, we present a contextual approach to Neanderthal settlement dynamics based on an understanding of lithic assemblage formation processes. We focused on a set of lithic artifacts from the Middle Palaeolithic site of El Salt. With the goal of isolating temporally constrained units of behavioral analysis, we analyzed the spatial distribution of lithic, faunal and combustion remains. Then, the lithic records from each of the resulting units were analyzed from a genetic and technical perspective. This goal was achieved by identifying lithic Raw Material Units (RMU) through observations on reduction processes, refits and their spatial distribution. Our results suggest that El Salt SU X lithic remains represent several diachronic human occupation episodes and different site functions. This study illustrates the benefit of investigating lithic assemblage formation processes to alleviate the palimpsest problem in Palaeolithic contexts.     

Hunter-gatherer land use in Late Glacial south-east Italy

This paper is concerned with the Late Palaeolithic settlement of south-eastern Italy at the close of the Pleistocene. The Late Palaeolithic assemblages of the region have been studied previously from a rigid typological stance, with various schemes put forward suggesting evolution of the assemblages through different stages of an Epigravettian tradition, while the potential role of social and economic factors in shaping the various industries has been ignored. This paper shows how the Late Palaeolithic occupation of the region should be considered in relation to the former existence of an extensive coastal plain and to the sea-level rise which submerged it. Factors such as the availability of lithic raw material and the alternative strategies by which it was procured, the particular activities in which the tools were used and the role of the sites within a larger land use system were clearly crucial to assemblage composition.     

Lithic production,site formation and Middle Palaeolithic palimpsest analysis: in search of human occupation episodes at Abric del Pastor Stratigraphic Unit IV (Alicante,Spain)

We present the results of an exercise in Middle Palaeolithic palimpsest analysis geared toward the identification of human occupation episodes. It is based on a combined reading of the archaeosedimentary deposit and the archaeological record of Stratigraphic Unit IV from Abric del Pastor (Alcoy, Alicante, Spain), chronologically framed within MIS 4–5. A study of site formation processes coupled with archaeostratigraphic analysis of the lithic record incorporating Raw Material Units (RMU) and refits, as well as with combustion features and faunal remains enabled identification a minimum of 4 and a maximum of 6 human occupation episodes within lithostratigraphic units IVa, IVb and IVc. Through our data it reaches a high resolution temporal frame close to the ethnographic time scale, which constitutes a significant contribution for the knowledge of human occupations types and landscape use in the Mediterranean rim of the Iberian Peninsula during Middle Palaeolithic.     

Bladelet cores as weapon tips? Hafting residue identification and micro-wear analysis of three carinated burins from the late Aurignacian of Les Vachons,France

The interpretation of Upper Palaeolithic carinated lithic forms as discarded cores from the production of bladelets is now well established and the weight of evidence to support this indisputable. However, it is also clear that the relationships between lithic typology, technology and function are complex. Presented here are micro-wear analyses of three carinated burins from the late Aurignacian level of Les Vachons, France. The remains of birch pitch adhering to the artefacts are clear evidence that they were hafted; the first time this material has been identified on Aurignacian artefacts. Thus, while the techno-morphology of the artefacts is consistent with their role as bladelet cores our results indicate that they functioned as hafted tools. Unlike other Middle and Upper Palaeolithic industries the Aurignacian is not thought to include (non-bladelet) lithic weapon tips. However, due to patterns of use-wear present on two of the artefacts we suggest that this was their most plausible hafted function.     

Defining and Characterizing Archaeological Quartzite: Sedimentary and Metamorphic Processes in the Lithic Assemblages of El Habario and El Arteu (Cantabrian Mountains,Northern Spain)

Quartzite was the second most‐often used lithic raw material in Europe in the Palaeolithic. However, this rock has not been characterized fully from the geo‐archaeological point of view. This study characterizes, defines and determines types of quartzite in northern Spain through a methodology that integrates petrography, digital image processing and X‐ray fluorescence. As a methodological foundation for the characterization of the material, it aims to open the possibility of discovering mechanisms of mobility, selection and management of quartzite by prehistoric societies. The types determined, based on the petrogenesis of the material, enable a better understanding of the archaeological sites of El Arteu and El Habario in the context of northern Spain in the Middle Palaeolithic.     

Can Lithic Attribute Analyses Identify Discrete Reduction Trajectories? A Quantitative Study Using Refitted Lithic Sets

Quantitative, attribute-based analyses of stone tools (lithics) have been frequently used to facilitate large-scale comparative studies, attempt to mitigate problems of assemblage completeness and address interpretations of the co-occurrence of unrelated technological processes. However, a major barrier to the widespread acceptance of such methods has been the lack of quantified experiments that can be externally validated by theoretically distinct approaches in order to guide analysis and confidence in results. Given that quantitative, attribute-based studies now underpin several major interpretations of the archaeological record, the requirement to test the accuracy of such methods has become critical. In this paper, we test the utility of 31 commonly used flake attribute measurements for identifying discrete reduction trajectories through three refitted lithic sets from the Middle Palaeolithic open-air site of Le Pucheuil, in northern France. The experiment had three aims: (1) to determine which, if any, attribute measurements could be used to separate individual refitted sets, (2) to determine whether variability inherent in the assemblage was primarily driven by different reduction trajectories, as represented by the refitted sets, or other factors, and (3) to determine which multivariate tests were most suitable for these analyses. In order to test the sensitivity of the sample, we ran all analyses twice, the first time with all the available lithics pertaining to each refitted set and the second time with randomly generated 75 % subsamples of each set. All results revealed the consistent accuracy of 16 attribute measurements in quadratic and linear discriminant analyses, principal component analyses and dissimilarity matrices. These results therefore provide the first quantified attribute formula for comparative analyses of Levallois reduction methods and a basis from which further experiments testing core and retouch attributes may be conducted.     

Edge damage distribution at the assemblage level on Middle Stone Age lithics: an image-based GIS approach

Lithic artifacts represent the most abundant cultural remains from Middle Stone Age sites in southern Africa. Of these, pointed forms (under a variety of names), blades, and flakes have long been recognized as the three most abundant general types, and retouch on all three is rare relative to similar forms of equivalent age elsewhere. Here we offer a new technique for documenting concentrations of edge damage on an assemblage level to infer taphonomic processes and to record usewear and retouch. This approach is specifically aimed at patterning on the assemblage scale, rather than on individual artifacts. We use points from a Middle Stone Age assemblage from Pinnacle Point Cave 13B, near Mossel Bay, South Africa, to illustrate the technique. Combining GIS, rose diagrams, and polar statistics, we were able to visually and statistically summarize lithic artifacts for patterns of edge damage. For the points made on quartzite in this assemblage, edge damage was found to be significantly patterned and taphonomic causes of the damage were rejected. The technique also opens avenues for many other quantitative analyses that are either impossible or difficult with current non-visual systems of recording, such as measurements of distance, angle, and area of edge damage.     

A crossbeam co-ordinate caliper for the morphometric analysis of lithic nuclei: a description,test and empirical examples of application

Over the last four decades, there has been surprisingly little advance in the quantitative morphometric analysis of Palaeolithic stone tools, especially compared to that which has taken place in biological morphometrics over a comparable time frame. In Palaeolithic archaeology's sister discipline of palaeoanthropology, detailed quantitative morphometric, geometric morphometric, and even 3D geometric morphometric analyses are now seen almost as routine. This period of relative methodological stasis may have been influenced by the lack of homologous landmarks on many lithic tools (essential for any comparative analysis), especially core-based technologies of the Lower Palaeolithic. Archaeological field conditions may also prohibit the use of expensive and delicate precision instruments in certain cases. Here we present a crossbeam co-ordinate caliper that – crucially – both geometrically locates and measures distances between morphologically homologous landmarks upon lithic nuclei via a single protocol. Intra- and inter-observer error tests provide evidence that error levels associated with the instrument fall within acceptable ranges. In addition, we present empirical examples of application in the form of a multivariate analysis of 55 discrete morphometric variables, and a 3D geometric morphometric analysis of co-ordinate landmark configurations derived from Pleistocene lithic nuclei (i.e. ‘cores’ sensu lato). We also introduce to lithic studies some techniques for the study of shape variation that have previously been used with success in biological morphometric analyses. We conclude that use of an instrument such as the crossbeam co-ordinate caliper may provide a useful adjunct to traditional techniques of lithic analysis, particularly in developing a quantitative morphometric approach.     

Seasonality and intra-site variation of Neanderthal occupations in the Middle Palaeolithic locality of Payre (Ardèche,France) using dental wear analyses

The reconstruction of Palaeolithic subsistence and settlement systems at the Middle Palaeolithic site of Payre (France) is undertaken through the application of dental wear analyses combined to zooarchaeological, technological, and ecological indicators. Three archaeological levels were investigated. Level D, dated to MIS 5, could correspond to an occupation during the cold season. In levels G and F, dated to MIS 8-7, animals were probably hunted during a warmer season. According to dental wear analyses, it is likely that level F has actually recorded a succession of short occupations, contrary to what is observed in the levels G and D. Those differences in the duration of site occupation are discussed in the light of previous sedimentological, zooarchaeological, and technological studies.     

New evidence of adhesive as hafting material on Middle and Upper Palaeolithic artefacts from Gura Cheii-Râşnov Cave (Romania)

Making use of analytical, chemical and mineralogical methods, this paper focuses on the analysis of inclusions in order to address the question of the provenance of prehistoric artefacts excavated in Gura Cheii-Râ?nov Cave (Romania). The study represents the first discovery of bitumen on lithic tools belonging to the Upper and Middle Palaeolithic in Europe. The material was identified through several analytical procedures, such as Fourier transform infrared spectroscopy (FTIR), energy-dispersive X-ray fluorescence (EDXRF), inductively coupled plasma atomic emission spectroscopy (ICP-AES), and X-ray diffraction (XRD).     

A late Middle Stone Age artifact assemblage from Sibudu (KwaZulu-Natal): comparisons with the European Middle Paleolithic

It has been suggested that many behavioral innovations, said to appear during the late Middle Stone Age in sub-Saharan Africa, facilitated the expansion of anatomically modern humans from Africa and the Near East into Europe at about 50 kyr; the process eventually led to the replacement of Neanderthals by modern humans and the emergence of the Upper Paleolithic. However, assemblages in this time range are little known in South Africa. In fact, the transition from Middle to the Later Stone Age in Southern Africa is controversial. The early appearance in South Africa of many innovations, such as sophisticated knapping techniques (e.g. the use of soft hammer or indirect percussion in blade production, of composite tools, of microlithic and bladelet technologies) remains to be established through technological analysis.We present here the first results of a project designed to carry out detailed technological studies of several lithic assemblages in South Africa and France dated to the transition period. At this time we have completed the study of a post-Howiesons Poort assemblage from the rock shelter site of Sibudu.The >2 m deep stratigraphic sequence of Sibudu extends from Howiesons Poort at its base to final Middle Stone Age, directly under Iron Age layers. We have analyzed in detail layer RSP (ca. 53 kyr, 1 m above the Howiesons Poort levels) which has provided a large assemblage of several thousand stone artifacts. Compared to published MSA assemblages this industry is unusual for the very high proportions of retouched pieces (15%). The technology is not very elaborate and there is no strong standardization of the end-products. There are no flakes of predetermined shapes; retouch is used to modify irregular flakes to obtain desired edges. Knapping of flakes and blades is done by hard hammer; soft hammer is used only for retouching tools. Interestingly the older Howiesons Poort blades were produced on the same raw materials by soft hammer. Raw material (hornfels and dolerite) was procured from distances of less than 20 km. Unifacial points are the dominant type and there is strong evidence of hafting and use as spear armatures. Detailed comparisons with Middle Paleolithic assemblages of Western Europe show that the late Middle Stone Age technology in South Africa is very similar to that of the Middle Paleolithic; in fact we see no fundamental differences between the two entities, as far as lithic technology is concerned. Implications for the Out of Africa hypothesis are discussed.     

The Palaeolithic of the Middle Son valley, north-central India: Changes in hominin lithic technology and behaviour during the Upper Pleistocene

The Middle Son valley in north-central India preserves extensive Quaternary alluvial deposits. A long history of archaeological and geological research in the valley has resulted in the discovery of lithic assemblages ranging from Lower Palaeolithic to microlithic, a rich corpus of fossilised faunal remains, and ash deposits from the 74,000 year-old Toba supereruption. This paper reviews the chronology and stratigraphy of the valley’s Quaternary sediments, and presents a model that hypothesizes the temporal sequence of important lithic assemblages from excavated and surface contexts. Artefacts in these assemblages are analysed and changes in lithic technology through time are described; this evidence is used to propose shifts in hominin behaviour and demographic structure in this region during the Upper Pleistocene. Recognising gaps in our understanding of the Middle Son record, future avenues of research are recommended that will build upon previous research and address questions of palaeoanthropological significance. The Middle Son valley preserves a long and rich record of hominin occupation from all periods of the Palaeolithic that is rarely paralleled by other sites in India.     

Identifying regional variability in Middle Stone Age bone technology: The case of Sibudu Cave

A few pieces of worked bone were previously reported from Sibudu, a site from KwaZulu-Natal in South Africa featuring a stratigraphic sequence with pre-Still Bay, Still Bay, Howiesons Poort, post-Howiesons Poort, late and final MSA cultural horizons. Here we describe an expanded collection of worked bones, including twenty-three pieces. Technological and use-wear analysis of these objects, and their comparison with experimental and ethnographic data, reveals that a number of specialised bone tool types (wedges, pièces esquillées, pressure flakers, smoothers, sequentially notched pieces), previously known only from the Upper Palaeolithic and more recent periods, were manufactured and used at least 30,000 years earlier at Sibudu Cave. These tools appear to be part of a local tradition because they are absent at contemporaneous or more recent southern African sites. Variability in Middle Stone Age material culture supports a scenario in which, beyond broad similarities in lithic technology, significant differences between regions, and trends of continuity at a local scale emerge in other aspects of the technical system, and in the symbolic domain. The archaeological record is revealing a complexity that prevents evaluation of the modern character of Middle Stone Age cultures in antinomic terms. We argue here that it is the detailed analysis of cultural variation that will inform us of the non-linear processes at work during this period, and contribute in the long run to explaining how and when crucial cultural innovations became established in human history.     

Middle Palaeolithic raw material gathering territories and human mobility in the southern Massif Central,France: first results from a petro-archaeological study on flint

During the Middle Palaeolithic in the south-eastern Massif Central and the bordering Rhone Valley, humans collected almost all their raw materials from various secondary outcrop which can be distinguished by the inherent characteristics of the materials. Similar lithic facies are unlikely to be encountered on two or more different natural outcrops and every artefact shows a surface that is well enough preserved to be studied according to a morphoscopic analysis at various magnifications. For all sites, some more remote sources were also exploited. However, most of the supposed exogenous materials, such as some Cretaceous flints identified in the Velay assemblages of Sainte-Anne I and Baume-Vallée for example, come from the heart of the massif where they occur in secondary alluvial deposits. Nevertheless, the extent of the foraging territories as revealed by raw materials sourcing covers a large band of various relief between the western and southern Causses, the Rhône corridor and the northern Limagne and Forez plains and animal species hunted by these groups express an environmental mosaic which fits with the image of landscape given by the raw materials.     

Recent Prehistoric Field Research in Central Tunisia: Prehistoric Occupations in the Meknassy Basin

Recent field prospection and test excavations in the Meknassy Basin (Central Tunisia) has revealed many prehistoric sites covering almost all the phases of North African prehistory from the Palaeolithic to the Neolithic. Excavations at the Aïn El-Guettar Mousterian site has yielded a faunal assemblage dominated by bovids and equids. One human tooth was found in situ. The stratigraphic sequence contains charcoal-rich occupation layers with faunal, human and lithic finds. A level with an industry resembling the Aterian was found beneath a Mousterian layer. The excavations at Aïn Oum Henda 2 (Jebel Maloussi) provided many Middle Palaeolithic lithic artefacts, some of which are pedunculates. From the excavations of the Rammadiya El Oghrab (Jebel Bou Hedma) we recovered some bones of antelope, many fragments of ostrich egg shell (among them a worked disc), an enormous quantity of flint (tools and splinters) and of land snails. In spite of the scarcity of land snails and the absence of bone in the rammadiya of Jebel Bou Hedma 1, the site produced a beautiful flint collection including an arrowhead found on the surface, which led us to place the site in the Neolithic.