Acheulean variability and hominin dispersals: a model-bound approach

Understanding the pattern of hominin dispersal is a fundamental component of Palaeolithic archaeology and palaeoanthropology. A widely held assumption is that bifacial handaxe (i.e. Acheulean or ‘Mode 2’) technologies evolved in Africa and dispersed into northern and western Eurasia via subsequent hominin migrations. To date, however, few formal tests of this hypothesis have been presented. Here, we use a combination of morphometrics, cultural transmission theory, and a dispersal model drawn from population genetics in order to test this hypothesis. The iterative founder effect (repeated bottlenecking) model is assumed to be supported if a significant inverse relationship is found between geographic distance from source along an estimated dispersal route and within-assemblage variance. The results of our analyses support the hypothesis that Acheulean technologies evolved in Africa and dispersed with migrating hominin populations into northern and western Eurasia under the assumptions of this iterative founder effect model. Based on our results we suggest that the occurrence of certain Mode 1 technologies such as those east of the Movius Line, and some assemblages assigned to the Clactonian of Britain, plausibly represent instances where effective population sizes in colonising populations dropped below levels where Mode 2 technologies could be maintained.     

Direct radiocarbon (AMS) dating of split-based points from the (Proto)Aurignacian of Trou de la Mère Clochette,Northeastern France. Implications for the characterization of the Aurignacian and the timing of technical innovations in Europe

Radiocarbon (AMS) dates on two split-based point wings and a hominin molar from the site of Trou de la Mère Clochette in the French Jura are presented in this paper. Dating split-based points has very rarely been undertaken. This is unfortunate given that these artefacts are critical to our definition and characterization of Early Upper Palaeolithic technocomplexes, as they are considered to be the type fossil of the Classic Aurignacian.     

琼脂凝胶在青铜文物激光清洗中的应用研究

激光清洗应用于青铜文物上有时会使其表面颜色及其他一些物化性质发生改变。如何优化这种方法改善这种状况?为此,本工作将琼脂凝胶-激光联用作为一种可能的优化手段,首先研究了凝胶对激光能量和作用的影响,包括以能量计测量激光穿过凝胶层后的能量减弱幅度,以及通过热敏纸和文物样品上的烧蚀斑观察凝胶对激光烧蚀结果的影响。其次在不同类型的青铜文物样品上将之与普通湿法激光清洗、机械清洗等手段做清洗效果的对比实验,并以视频显微镜、扫描电镜及能谱仪、X射线衍射等手段进行分析验证。实验结果发现,凝胶能小幅度降低激光能量,减轻激光引起的青铜文物表面微观结构的改变,为清洗操作提供更灵活多样的选择。凝胶-激光联用的方法在实验的文物样品上取得了理想的清洗效果,兼顾了操作的效率性和安全性,是在今后的应用中可被考虑的手段。     

Simulating global patterns of Pleistocene hominin morphology

The first ever simulations of global patterns of early Homo morphology are presented here. These simulations are a good match to the known patterns in the fossil record. An enhanced version of the Stepping Out model is presented which simulated global patterns of hominin morphology including genetic drift and the homogenising effects of inter-group exchange. Stepping Out is then used to examine the importance of environmental factors on hominin morphology. The most significant feature of the simulations is an emergent division between the African and Asian populations. The effect of biogeographical factors on this division and other patterning is considered. Throughout, modelling results are interpreted in the context of fossil and archaeological records in order to enhance our understanding of population histories of hominin groups.     

Taphonomy of ungulate ribs and the consumption of meat and bone by 1.2-million-year-old hominins at Olduvai Gorge,Tanzania

The phenomenon of equifinality complicates behavioral interpretations of faunal assemblages from contexts in which Pleistocene hominins are suspected bone accumulators. Stone tool butchery marks on ungulate fossils are diagnostic of hominin activities, but debate continues over the higher-order implications of butchered bones for the foraging capabilities of hominins. Additionally, tooth marks imparted on bones by hominins overlap in morphology and dimensions with those created by some non-hominin carnivores, further confounding our view of early hominins as meat-eating hunters, scavengers or both. We report on the manual/oral peeling of cortical layers of ungulate ribs as taphonomically diagnostic of hominoid/hominin meat- and bone-eating behavior that indicates access to large herbivore carcasses by hominins at the site of BK, Olduvai. Supporting these inferences, we show that certain types of rib peeling damage are very rare or completely unknown in faunas created by modern carnivores and African porcupines, but common in faunas modified by the butchery and/or consumption activities of modern humans and chimpanzees, during which these hominoids often grasp ribs with their hands, and then used their teeth to peel strips of cortex from raggedly chewed ends of the ribs. Carnivores consume ungulate ribcage tissues soon after kills, so diagnostic traces of hominin butchery/consumption on ribs (i.e., peeling and butchery marks) indicate early access to ungulate carcasses by BK hominins. Tooth marks associated with the peeling and butchery marks are probably hominin-derived, and may indicate that it was not uncommon for our ancestors to use their teeth to strip meat from and to consume portions of ribs. Recognition of rib peeling as a diagnostic signature of hominoid/hominin behavior may also aid the search for pre-archaeological traces of hominin meat-eating.     

The application of biometry and LA-ICP-MS to provenance isolated bones: a study of hominin remains from Oumm Qatafa Cave,Judean Desert

Three hominin phalanges were recently identified in old faunal collections attributed to the Late Acheulean (Layer D2) dated to ca. 213 Kya, from Oumm Qatafa Cave (Judean Desert), a site excavated in 1928–1949. In terms of general appearance (colour, patina and adhering sediment), these specimens resembled the fauna with which they were found, but the likelihood of stratigraphic problems especially in old excavations, the presence of 4th millennium b.c. burials in the topmost Layer A at the site and the absence of any mention of Late Acheulean hominin remains in publications relating to the site prompted us to verify that the phalanges were indeed in situ. Osteometric examination showed the phalanges to be indistinguishable from those of Middle Paleolithic Levantine anatomically modern humans (AMHS) as well as Upper Paleolithic and recent populations, thus contributing little to the resolution of their provenance. To further investigate this issue, we compared the elemental composition of the phalanges to that of fauna from the same and overlying archaeological layers using non-destructive laser ablation–inductively coupled plasma mass spectrometry (LA-ICP-MS). The results showed a close resemblance in elemental composition between the phalanges and fauna from Layer D2, implying that they are in situ. This would indicate either an early occurrence of AMHS in the region or the presence of an ancestral archaic Homo. We propose that LA-ICP-MS offers a useful minimally invasive method for provenancing isolated human and faunal remains.     

Investigating the role of food processing in human evolution: a niche construction approach

While it is generally agreed that food processing has had a role in human evolution, the specific ways that is has affected our evolution are not well understood. Using a Niche Construction Theory (NCT) perspective, coupled with methodologies borrowed from “post-harvest” research in the plant sciences, this paper investigates the means and mechanism by which food processing is of evolutionary consequence. The central tenet of NCT is that organisms have an active role in their own evolution through reciprocal interactions with their environments; niche construction is understood to occur when organisms initiate long-term changes to their environments that modify the selection pressures on themselves and their descendants (and on other organisms in the environment). Humans and our hominin ancestors are considered to be the ultimate niche constructors due to our ability to modify selection pressures through diverse culturally generated and transmitted cultural means, i.e. cultural niche construction. In this paper, post-harvest methods are used to identify how food processing could feasibly have permitted hominins to modify their evolutionary selection pressures. Food processing is shown to facilitate access to increasing amounts of digestible nutrients and energy (kilocalories/kilojoules) as well as promoting increased dietary breadth and making possible the production of safer and more stable foods. It is argued that these advancements catalysed related technological and ecological skills and knowledge, which together with the nutritional benefits, further triggered changes in hominin brain and body and locomotory adaptations and increased longevity, disease prevention and juvenile survival rates.     

Ochre fingerprints: Distinguishing among Malawian mineral pigment sources with Homogenized Ochre Chip LA–ICPMS

In this study, we compared the effectiveness of instrumental neutron activation analysis (INAA) of bulk ochre to laser ablation‐inductively coupled plasma mass spectrometry of homogenized ochre chips (HOC LA–ICPMS) at distinguishing among three ochre sources in northern Malawi. Both techniques upheld the Provenance Postulate; however, HOC LA–ICPMS required less sample material than INAA and facilitated fast, inexpensive replicate observations that allowed for more robust statistical analysis. Our results indicated that HOC LA–ICPMS is a maturing technique that will be a valuable option for analysing artefacts that require minimally destructive sampling but are too large to fit into the laser cell for direct ablation. With regard to the statistical procedures used, stepwise canonical discriminant analysis was demonstrated to be a highly effective method for distinguishing among ochre sources, even in the presence of significant intra‐source and intra‐sample heterogeneity. Continued development of the HOC sample preparation technique will expand the range of archaeological ochre artefacts that can be included in provenance studies and prevent bias towards artefacts of convenient‐to‐analyse dimensions.     

Looking for problems: A systems approach to hominin palaeocommunities from Plio‐Pleistocene Africa

This paper evaluates the potential contribution(s) of faunal analysis to hominin palaeoecology at regional and continental scales, through an explicit investigation of the values, methods and conceptual frameworks of palaeoanthropology and their compatibility with real data structures. It employs a problem‐framing method developed in policy‐relevant science to establish a suitable research design for ‘large scale’ faunal analysis, before testing the method in a pilot study of 48 faunal assemblages from the African Plio‐Pleistocene. Hitherto, taphonomic bias has discouraged attempts to study faunal assemblages on large spatiotemporal scales, and most scientists have restricted their work to the smaller (site or local) scale and/or a subset of the total fauna. Furthermore, palaeoanthropological studies of fauna tend to address pre‐determined questions through analysis of statistical outputs (patterns), rather than investigating the limitations and potential of the data through exploratory work. This paper, despite identifying a number of inherent constraints on palaeocommunity analysis at the large scale—including a clear tendency towards the segregation of faunal assemblages along taphonomic and geographic lines—successfully defines palaeocommunities and identifies systematic variation in their distribution in several regional datasets and at the continental scale. It suggests that the potential viability of faunal analyses for a given project could be made empirically testable, and further work on the lines defined here might provide insight into the impacts of taphonomy and ecology at the large scale. Although there are conceptual and methodological problems associated with large‐scale faunal analyses, this paper suggests that they could provide some insight into hominin environments, evolutionary ecology and biogeography as part of a holistic, multi‐scale approach to our lineages' history. Copyright © 2010 John Wiley & Sons, Ltd.     

New Data on the Exploitation of Obsidian in the Southern Caucasus (Armenia,Georgia) and Eastern Turkey,Part 1: Source Characterization

A large analytical programme involving both obsidian source characterization and obsidian artefact sourcing was initiated recently within the framework of the French archaeological mission ‘Caucasus’. The results will be presented in two parts: the first part, this paper, deals with the presentation and characterization of obsidian outcrops in the southern Caucasus, while the second presents some results obtained from a selection of artefacts originating from different Armenian sites dated to between the Upper Palaeolithic and the Late Bronze Age. The same analytical method, LA–ICP–MS (laser ablation inductively coupled plasma mass spectrometry), has been used to characterize all the studied samples (both geological and archaeological). This method is more and more widely used to determine the elemental composition of obsidian artefacts, as it causes minimal damage to the studied objects. We present in this first part new geochemical analyses on geological obsidians originating from the southern Caucasus (Armenia, Georgia) and eastern Turkey. These data enhance our knowledge of the obsidian sources in these regions. A simple methodology, based on the use of three diagrams, is proposed to easily differentiate the deposits and to study the early exploitation of this material in the southern Caucasus.     

Hunted or Scavenged Neanderthals? Taphonomic Approach to Hominin Fossils with Carnivore Damage

Carnivore damage on Neanderthal fossils is a much more common taphonomic modification than previously thought. Its presence could have different explanations, including predatory attacks or scavenging scenarios, which are both situations with important implications concerning Neanderthal behaviour. In the present paper, we analyse several Neanderthal hominin fossils from a taphonomic and forensic perspective in order to infer the nature of the modifications observed on the bone surfaces. Fossils displaying carnivore modifications from Spain, Germany, Belgium and Greece are evaluated from a taphonomic perspective for the first time in a significant sample of hominin specimens. Our results show that the materials analysed have been modified by small to large carnivores and that both attacks and strictly carnivore scavenging events can be inferred. This study also points out the importance of developing taphonomic approaches to the analysis of hominin bone surfaces, which can contribute significantly to knowledge of several aspects of Neanderthal behaviour. Copyright © 2017 John Wiley & Sons, Ltd.     

Experimental study of cut marks made with rocks unmodified by human flaking and its bearing on claims of ∼3.4-million-year-old butchery evidence from Dikika, Ethiopia

In order to assess further the recent claims of ∼3.4 Ma butchery marks on two fossil bones from the site of Dikika (Ethiopia), we broadened the actualistic-interpretive zooarchaeological framework by conducting butchery experiments that utilized naïve butchers and rocks unmodified by human flaking to deflesh chicken and sheep long limb bones. It is claimed that the purported Dikika cut marks present their unexpectedly atypical morphologies because they were produced by early hominins utilizing just such rocks. The composition of the cut mark sample produced in our experiments is quite dissimilar to the sample of linear bone surface modifications preserved on the Dikika fossils. This finding substantiates and expands our earlier conclusion that—considering the morphologies and patterns of the Dikika bone surface modifications and the inferred coarse-grained depositional context of the fossils on which they occur—the Dikika bone damage was caused incidentally by the movement of the fossils on and/or within their depositional substrate(s), and not by early hominin butchery. Thus, contrary to initial claims, the Dikika evidence does not warrant a major shift in our understanding of early hominin behavioral evolution with regard to carcass foraging and meat-eating.     

Comparison of 3D Landmark and 3D Dense Cloud Approaches to Hominin Mandible Morphometrics Using Structure‐From‐Motion

The objective of this study is to compare landmark‐based assessment of hominin mandible morphological variation with that from a high‐density point cloud, using 3D models constructed from structure‐from‐motion (SfM) surface capture techniques. Surface models of nine hominin mandible casts were created using SfM photogrammetry. The morphology of these models was described using traditional geometric morphometrics based on identification of landmarks. This was compared to the morphological variation described by the differences between high‐density point clouds, which do not rely on anatomical landmarks, using an iterative closest point algorithm. The landmark‐based approach grouped the anatomically modern human and Neanderthal mandibles with reasonable success. The high‐density point cloud approach also grouped these successfully, but was able to incorporate information from a specimen that was insufficiently preserved to be included in the landmark data set. This improved the accuracy of the grouping. The use of high‐density point clouds from surface capture to analyse hominin mandible morphology allows for greater amounts of information to be included and offers a potential method to identify shape affinity that is as successful as landmark‐based geometric morphometrics.     

A case of valgus ankle in an early Pleistocene hominin

Bipedal locomotion is a defining character of the hominin lineage. A skeletal correlate of bipedality is a perpendicularly oriented tibia relative to the plane of the ankle joint, positioning the foot directly under the centre of mass. Non‐human primates, in contrast, possess a tibial shaft that tilts laterally away from the plane of the ankle joint (valgus ankle), which positions the foot in inversion and is adaptive for arboreal climbing. KNM‐ER 2596 is a small distal tibia from 1.9 mya sediments at Koobi Fora, Kenya. Though it possesses some morphologies functionally linked to bipedality, such as an expanded metaphysis, it also possesses a valgus tilt to the ankle. We test the competing hypotheses that the KNM‐ER 2596 tibia is from a cercopithecoid, a non‐human hominoid, or a pathological hominin. A survey of the orthopaedic literature and a comparative study of modern human and non‐human primate tibiae support the hypothesis that KNM‐ER 2596 is from a hominin. In order to investigate the non‐phylogenetic causes of valgus ankle, we examined human skeletal tibiae with valgus tilt secondary to fracture of the distal fibula. Untreated breaks of the lower third portion of the fibula during childhood can result in a valgus tilt to the distal tibia and occasionally other peculiar morphologies found in the KNM‐ER 2596 tibia such as a superoinferiorly atrophied medial malleolus. The morphology of this tibia is incompatible with hypotheses that it is from a cercopithecoid or a hominoid, and instead, we suggest that KNM‐ER 2596 belonged to a hominin that may have suffered a fracture of the lower left fibula as a juvenile. Copyright © 2010 John Wiley & Sons, Ltd.     

Stable Lead Isotope Analysis of Rio Grande Glaze Paints and Ores Using ICP-MS: A Comparison of Acid Dissolution and Laser Ablation Techniques

High resolution inductively-coupled plasma mass spectrometry (ICP-MS) analyses of stable lead isotopes in Rio Grande glaze paints and New Mexico lead ores (galena) are compared using both acid dissolution and laser ablation techniques. These comparisons demonstrate that acid dissolution is preferable when more accurate measurements are required. In particular, acid dissolution with aqueous induction provided a better match between the archaeological glaze paints and their potential ore sources. However, these comparative studies also show that laser ablation may be an acceptable alternative for examining archaeological materials when the emphasis is on rapid, relatively non-destructive analyses of large data sets.     

LEAD ISOTOPE ANALYSIS OF ARCHAEOLOGICAL METALS BY MULTIPLE‐COLLECTOR INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY*

Lead isotope ratios in archaeological silver and copper were determined by MC–ICPMS using laser ablation and bulk dissolution without lead purification. Laser ablation results on high‐lead metals and bulk solution analyses on all samples agree within error of TIMS data, suggesting that problems from isobaric interferences and/or mass bias variations due to the presence of matrix elements are insignificant. Inaccurate laser ablation analyses on low‐lead copper reflect erroneous mass bias corrections from use of a non‐matrix matched standard. However, in most cases, silver and copper are analysable for lead isotopes by bulk dissolution or laser ablation MC–ICPMS with simplified sample preparation.     

Taphonomic resolution and hominin subsistence behaviour in the Lower Palaeolithic: differing data scales and interpretive frameworks at Boxgrove and Swanscombe (UK)

The identification of human butchery-signatures on fauna from Lower Palaeolithic sites is well documented and readily identifiable. Such bone surface modifications have the potential to provide not only information about past hominin meat-procurement behaviour but address the wider issue of competition for resources with other carnivore species. To understand and discuss these broader issues both hominin and natural bone surface modifications must be understood and contextualised within a site-specific spatial and temporal framework. This paper presents new results from faunal analysis at two key British Lower Palaeolithic localities: Boxgrove and Swanscombe. It illustrates that different depositional environments and excavation histories have resulted in different scales and resolutions of available data and hence in varying interpretive potentials. At Swanscombe the archaeological record has been disturbed by both fluvial activity and excavation history providing a coarser-grained record of anthropogenic behaviour than previously acknowledged. Conversely, at Boxgrove, a finer-grained, higher resolution record of human behaviours has been preserved; this, combined with both an extensive and intensive excavation strategy, has allowed for a broader discussion of hominin landscape use, resource competition and meat-procurement behaviour. This paper highlights that assessing the specific depositional environment at each site is crucial to understanding Palaeolithic faunal assemblage formation and, consequently, the available data-resolution and behavioural interpretation.     

COMPLEMENTARY COMPOSITIONAL ANALYSIS OF FORMATIVE PERIOD CERAMICS FROM THE TEOTIHUACAN VALLEY

During the Classic Period, Teotihuacan was an economic centre of central Mexico, but little is known about the development of this system. This paper presents a pilot study in multi‐method analysis of Formative Period (1500/1400 bc –ad 150) ceramics from the Teotihuacan Valley. Pottery was characterized by instrumental neutron activation analysis, laser ablation inductively coupled plasma mass spectrometry, thermal ionization mass spectrometry and petrography. It appears that most pottery was made from local raw materials that differ from later Postclassic materials. Some inter‐village interaction is suggested by stylistic choices, and one settlement had a group of ceramics made from unequivocally distinct raw materials. The study demonstrates how complementary methods can be used to draw greater anthropological meaning from compositional differences.     

The Middle Palaeolithic of the Nejd,Saudi Arabia

The Pleistocene archaeological record of the Arabian Peninsula is increasingly recognized as being of great importance for resolving some of the major debates in hominin evolutionary studies. Though there has been an acceleration in the rate of fieldwork and discovery of archaeological sites in recent years, little is known about hominin occupations in the Pleistocene over vast areas of Arabia. Here we report on the identification of five new Middle Palaeolithic sites from the Nejd of central Arabia and the southern margins of the Nefud Desert to the north. The importance of these sites centers on their diversity in terms of landscape positions, raw materials used for lithic manufacture, and core reduction methods. Our findings indicate multiple hominin dispersals into Arabia and complex subsequent patterns of behavior and demography.     

Reconnaissance of Prehistoric Sites in the Red Sea Coastal Region of the Sudan,NE Africa

This paper reports results of a recent Stone Age-focused archaeological survey in the Red Sea coastal region of the Republic of Sudan, northeast Africa. Bifaces (handaxes) are the most conspicuous artifact class encountered during the survey and are characteristic of the Acheulean technocomplex. Other recorded artifact types include points, scrapers, and prepared core products referable to the Nubian and recurrent Levallois methods. Most of the artifact-bearing localities lie landward—outside of the coastal margin—thus, the evidence does not signify direct coastal adaptation per se. Our preliminary findings suggest that multiple Pleistocene-age hominin settlements tied to a terrestrial niche existed in the region. The western margin of the Red Sea occupies a pivotal location, linking the Horn of Africa and the Levant, two vital regions in human evolutionary research. Thus, the Stone Age data from the Sudan region has direct relevance for assessing hominin dispersal routes out of Africa.