Geoarchaeology of Sidon's ancient harbours,Phoenicia

Geoarchaeological data from Sidon's ancient harbour areas elucidate six evolutionary phases since the Bronze Age. (1) At the time of Sidon's foundation, during the third millennium BC, medium sand facies show the city's northern and southern pocket beaches to have served as proto-harbours for Middle to Late Bronze Age societies. (2) Towards the end of the Late Bronze Age and the Early Iron Age, expanding international trade prompted coastal populations into modifying these natural anchorages. In Sidon's northern harbour, transition from shelly to fine-grained sands is the earliest granulometric manifestation of human coastal modification. The lee of Zire island was also exploited as a deep-water anchorage, or outer harbour, at this time. (3) Although localised sediments evoke developed port infrastructure during the Phoenician and Persian periods, high-resolution reconstruction of the northern harbour's Iron Age history is problematic given repeated dredging practices during the Roman and Byzantine periods. (4) Fine-grained silts and sands in the northern harbour are coeval with advanced Roman engineering works, significantly deforming the coastal landscape. Bio- and lithostratigraphical data attest a leaky lagoon type environment, indicative of a well-protected port. (5) The technological apogee of Sidon's northern harbour is recorded during the late Roman and Byzantine periods, translated stratigraphically by a plastic clays unit and brackish lagoon fauna. (6) A final semi-abandonment phase, comprising coarse sand facies, concurs silting up and a 100–150 m progradation of the port coastline after the seventh century AD. We advance three hypotheses to explain these stratigraphic data, namely cultural, tectonic and tsunamogenic. Finally, our results are compared and contrasted with research undertaken in Sidon's sister harbour, Tyre.     

Shipwreck Evidence from Kilwa,Tanzania

This article reports on the artefacts and environment of marine ballast and pottery sites identified through inter‐tidal and underwater survey around Kilwa, Tanzania, one of the most important medieval sultanates along the east African coast. An inter‐tidal site on the limestone fringing reef on the approaches to Kilwa Kisiwani Harbour and an underwater site within the harbour have been dated from associated pottery to c.8th–10th century and the 13th–16th century respectively. The presence of exotic basalt ballast is discussed as an indicator of wreck‐sites.     

Reburial of shipwrecks in marine sediments: a long-term study on wood degradation

Historical shipwrecks in marine environments are continuously decomposed by wood-degrading organisms, adapted to this specific environment. To protect the wrecks from degradation and to preserve the unique remains for future generations, reburial of wrecks using various covering materials has been suggested as a long-term preservation method. The following experiment was carried out to study the bio-protective effect of sediment. Sound oak, pine, and birch samples were buried above and within marine sediment in Marstrand harbour, and retrieved for analysis after 6, 12, 24, and 36 months. Macroscopic as well as light-microscopic examinations were carried out on each occasion. Marine borers (shipworm, Limnoria), soft rot and tunnelling bacteria were wood degraders immediately above the seabed; soft rot, tunnelling bacteria, and erosion bacteria were active 10 cm below the seabed; erosion bacteria were the only degraders at a depth of 43 cm below the seabed. The wood species had different durability towards the decay agents. After 3 years, wood samples above the seabed were totally decomposed, whereas wood was highly protected at 43 cm depth in sediment. In the sediment, decay decreased significantly with depth of burial. The results suggest that reburial of shipwrecks in marine sediment can be recommended as a simple and efficient method for long-term preservation of the wooden cultural heritage.     

New radiometric ages for the Early Upper Palaeolithic type locality of Brno-Bohunice (Czech Republic): comparison of OSL,IRSL, TL and C dating results

New radiometric data are reported from the recent excavation of the type locality of the Early Upper Palaeolithic entity of the Bohunician. Recently obtained radiocarbon (¹⁴C) data on charcoal are compared with new Optically Stimulated Luminescence (OSL) dating of sediment. OSL ages were determined on sediment from the archaeological occupation at Brno-Bohunice, as well as from the over- and underlying loessic sediments. Multiple techniques were applied, which all gave congruent results. While a dual protocol (post IR-OSL) failed the quality criteria tests, ages were obtained by Multiple-Aliquot-Additive-Dose (MAAD) on polymineral material and Single-Aliquot-Regeneration (SAR) on fine grain quartz extract as well as on polymineral material. Fading tests show significant loss of Infrared Stimulated Luminescence (IRSL) after storage for 3 and 12 months for one sample, but little or no fading for others. The resulting (uncorrected) age estimates are smaller than those on quartz by OSL methods. The latter are considered to be more reliable estimates of the sedimentation age of these deposits. The measured OSL doses do not show a simple distribution and the lowest 5% was used for age calculation to represent the most likely sedimentation age. The quartz from the loess overlying the archaeological layer is OSL dated to 30.9 ± 3.1 ka, while the sediment for the paleosol which contains the archaeological layer gave an age of 58.7 ± 5.8 ka. The attribution of this paleosol to the Hengelo interstadial is therefore questionable. However, if the Hengelo interstadial is correlated with the Dansgaard/Oeschger (D/O) event 12, statistical agreement within 2-σ is achieved. The OSL result for the archaeological layer is in accordance with a weighted average TL date on heated flint artifacts of 48.2 ± 1.9 ka from this layer as well as calibrated radiocarbon data (CalPal Hulu 2007) from nearby locations. However, radiocarbon data on charcoal samples obtained during excavation at Brno-Bohunice 2002 provide age estimates between 30 and 40 ka ¹⁴C-years, which translate to approximately (33) 35–44 ka on the calendric time scale according to the Hulu 2007 model. For the underlying loess a depositional age of 104.3 ± 10.6 ka was obtained by OSL. The presented OSL ages indicate that a simple correlation of soil sequences between sites within a region has to be verified by chronometric dating.     

Discovery of Ancient Harbour Structures in Calabria, Italy, and Implications for the Interpretation of Nearby Sites

During underwater survey around Crotone, Calabria, Italy, in 2005, structures from two harbour phases were located, possibly dating from the Archaic Greek and Roman periods. Both harbours are close to the Greek and Roman architectural remains on Capo Colonna, as well as to underwater deposits of large stone blocks and other, previously-excavated sites. With the discovery of these harbour structures, new hypotheses arise for understanding the building-material deposits and excavated sites. A critical component of these hypotheses is the assessment of local geological data, specifically ancient sea-level, in relation to the archaeological record.
© 2007 Author     

Changing Water Depths in the Eastern Part of Sydney Harbour due to Human Impacts

Sydney Harbour has been significantly modified by human impacts from the start of the European settlement in 1788. Land clearing has accelerated soil erosion, resulting in increased sedimentation. Dredging has deepened many areas to accommodate ever-larger ships. In this paper a GIS method is used to map bathymetric changes in the eastern part of the harbour from 1903 to more recently. Dredged areas are apparent in the entrance and in wharfage areas, while sedimentation is most marked around the deepest section, which is well inside the harbour itself. In this latter region sediment has built up considerably, to over 3 m in some locations, and ship-induced motions appear to have had an impact. Despite these changes the overall depth of the eastern part of the harbour has changed little. This work is of interest to maritime archaeologists because it brings out the types of processes by which sediments can accumulate and be removed thus altering a harbour’s seabed and potentially burying, exposing or erasing archaeological sites and artefacts.     

Provenance study of early and middle bronze age pottery from Kaman-Kalehöyük,Turkey, by heavy mineral analysis and geochemical analysis of individual hornblende grains

The provenance of Early Bronze Age and early Middle Bronze Age pottery produced between 2100 and 1970 B.C. and excavated from Kaman-Kalehöyük, Turkey was studied using mineralogical methods, including heavy mineral analysis and geochemical study of individual hornblende grains. The relative abundances of heavy minerals in the fabrics of 20 Early Bronze Age (EBA) and early Middle Bronze Age (MBA) pottery sherds, together with 27 local sediments collected within a radius of 25 km of the site were studied. The heavy mineral distributions in the Kaman region were statistically analyzed for consistencies in their occurrence. Amphibole was found to be the most abundant heavy mineral in most of the analyzed samples, followed by titanite and epidote. The amounts of other minerals such as garnet, clinopyroxene, and zircon are subordinate. Different proportions of heavy minerals in the fabrics allow categorization of the EBA and early MBA potteries into 5 groups. Comparative study of heavy mineral assemblages of local sediments and pottery suggests that half of the EBA and most of the MBA potteries were produced from sediment near the excavation site, whereas the other half of the EBA potteries were produced from sediment occurring at 25 km east or more east of the site. The geochemistry of individual amphibole grains was studied by electron-microprobe analysis. Most of the studied amphibole grains are calcic and aluminous, corresponding to hornblende. They can be further characterized into four types based on their chemical composition. The combination of heavy mineral identity and hornblende geochemistry provides diagnostic evidence for the origins of Kaman-Kalehöyük pottery. These and analogous heavy mineral techniques are effective archaeometric tools for determining pottery provenance.     

Magnetic imaging and electrical resistivity tomography studies in a Roman military installation found in Satala archaeological site,northeastern Anatolia,Turkey

Satala is one of the last great military centers in the Roman East available for archaeological and historical investigations. This archaeological site is situated on the crossing of two singularly important routes in North-East Asia Minor. Only little archaeological fieldwork in and around Satala has so far been carried out, thus delimiting our knowledge of the site and its role within the Roman military structure of the East. In order to provide further data on the site, we carried out geophysical surveys including the application of magnetic and electrical resistivity techniques in an area north of the Sadak village. The geophysical surveys within this area (supposedly part of the Roman military camp) proceeded in two stages. The first stage saw magnetic gradiometer imaging studies being carried out on 2.1 ha, measured by a Geoscan FM-36 fluxgate gradiometer by using 0.5 × 1 m grid intervals. For the second stage a different geophysical technique was used—resistivity tomography. Resistivity data were collected using a number of combined 2D resistivity pseudosections in the eastern part of the area which contained very regular magnetic anomalies. The 3D data were obtained by the combination of all survey lines collected from 2D data sets, and thereafter the arranged data were processed by using the 3D robust inversion modified from the smoothness-constrained algorithm. Electrical resistivity tomography investigations revealed that the buried archaeological structures might be located near the surface, except for some structures found in the middle of the studied area. The archaeological structures were furthermore determined by realistic model sections and volumetric representations. Magnetic imaging and electrical resistivity tomography surveys show that the combined usage of these techniques advances the understanding of archaeological structures beneath the surface.     

New field and geochemical evidence from vitrified forts in South Morar and Moidart,NW Scotland: further insight into melting and the process of vitrification

New field and laboratory work has been carried out on two vitrified forts, Rhubh Aird Ghamhsgail near Arisaig and The Torr near Acharacle. Fieldwork confirms that both are constructed from rubble largely comprising local psammitic Moine Supergroup rocks and that their walls are relatively well preserved with large portions of vitrified material remain, particularly at The Torr, where remnants of up to four courses of stone facing occur. The preserved wall fills comprise mostly psammitic rubble set in a dark brown, vesicular, glassy to aphanitic matrix that in many places preserves evidence of downward flow. Conventionally, vitrification is explained through combustion of timber interlacing within the walls leading to melting that has been modelled in the granite system. However, considering Iron Age smelting technology, this leads to problems in obtaining high temperatures (≥1000 °C) over tens of metres of wall length. Geochemical analysis of the vitrification indicates that modelling the melting within the granite system is incapable of providing a partial melt matching the composition of vitrification. At The Torr, pelite fragments have been found near the base of the wall where partial melt occurs as black bubbles. In these fragments it appears that micas (largely biotite) have formed the melt via the reaction biotite + quartz = sanidine + orthopyroxene + liquid which takes place at temperatures c. 850 °C. Quench crystals in the melt include orthopyroxene, plagioclase, spinels, ilmenite, magnetite, anatase and apatite confirming that it was not a granite melt. These melted fragments are found next to material with biotite that, superficially, appears unmelted, suggesting that some of the heating took place perhaps away from the edifice and unmelted residue was utilised as part of the rubble fill, suggesting that in situ partial melting of the rubble is unlikely. However, in other parts of the edifice heat affected, yet unmelted, fragments are dominant. The new evidence indicates that vitrification occurred at lower temperatures than previously modelled and thus the melts could have been achieved more easily than previously thought.     

Iron Age hydraulic plaster from Tell es-Safi/Gath,Israel

Hydraulic plasters or mortars prior to the Roman period are rare. Here, we report the identification and characterization of 3000 year old (Iron Age) hydraulic plaster surfaces from the site of Tell es-Safi/Gath. This site, located in central Israel, was occupied almost continuously from prehistoric through modern times, and is identified as the Canaanite and Philistine city of Gath. A survey using an on-site Fourier transform infrared spectrometer (FTIR) identified the presence of amorphous silicates, in addition to calcite, in each of two superimposed plaster layers. This suite of minerals is characteristic of hydraulic plaster. An in-depth characterization of the plasters using FTIR, acid dissolution, X-ray fluorescence (XRF), X-ray powder diffractometry (pXRD), heating experiments and scanning electron microscopy (SEM) coupled with energy dispersive spectroscopy (SEM–EDS), shows that special silicate-containing minerals were brought from some distance to the site in order to produce these plaster surfaces. We therefore conclude that the plasters were deliberately produced, and were not the result of a fortuitous addition of local silicate minerals. A layer of around 150 μm thick enriched in carbonate hydroxylapatite was found in both plaster surfaces, and the same mineral was identified by infrared spectrometry in the surrounding sediments. This suggests that organic materials were used on these surfaces. These surfaces are among the oldest hydraulic plasters known.     

The Search for the 1871 Whaling Fleet of the Western Arctic: writing the final chapter

During 2015, the NOAA Office of National Marine Sanctuaries led a systematic seabed mapping survey along the Arctic coast of Alaska in search of whaling ships abandoned in 1871. The purpose of the expedition was to determine if wreckage from these abandoned ships was still present in the survey area, and, if so, to assess and document its location, status and condition. The project mapped approximately 50 km² of seabed using sidescan sonar and magnetometry and identified six sites that contained wreckage from at least two whaling ships. Magnetometry data also suggested that additional wreckage may be buried in the seabed.     

Marine Magnetic Survey of a Submerged Roman Harbour, Caesarea Maritima, Israel

A marine geophysical survey was conducted at Caesarea Maritima, Israel, to map the buried structure of King Herod's Roman harbour. Magnetic surveys reveal the presence of an extensive hydraulic concrete foundation below the ruined harbour moles. The magnetic anomaly patterns indicate that the concrete foundation was laid out in header fashion along N-S and W-E trending segments to form two large 'artificial islands'. Magnetic lows within the structure identify baffles that were infilled with sand to stabilise the concrete foundation walls.
© 2004 The Nautical Archaeology Society     

Subsistence practices and pottery use in Neolithic Jordan: molecular and isotopic evidence

This paper presents direct evidence of subsistence practices and pottery use at a Late Neolithic site at al-Basatîn, northern Jordan. Measurable concentrations of C_16:0 and C_18:0 were recovered from 8 of 10 archaeological pottery fragments through use of a microwave-assisted silica gel and aminopropyl solvent protocol developed for the isolation and concentration of free fatty acids in marine sediments. Subsequent isotopic analysis of the surviving C_16:0 and C_18:0 saturated fatty acids revealed ∂¹³C ratios consistent with those of adipose fats of ruminant and non-ruminant animals pastured on lands adjacent to the Jordan Valley. The high recovery of diagnostic compounds from the al-Basatîn material is discussed in context of a wider examination of the initial development and use of pottery in the Fertile Crescent, and the emerging debate concerning the efficacy of stable carbon isotope values in characterizing organic residues embedded in pottery fragments recovered from the earliest ceramic horizons in the Middle East and Europe.     

Notice of the Annual Meeting,at Norwich

Excavations took place in 1969, in advance of housing development, on the site of a fourth-century Roman pottery workshop, two adjacent kilns, a well, a large pit and two burials. The workshop contained internal features linked with pottery production, including possible emplacements for potters' wheels. Two kilns, each constructed differently, were producing grey and colour-coated wares. A large pit was used for rubbish. A well, square in plan, was associated with the workshop and must have provided water for the potters. Of particular interest was a complete millstone, which appears to have been used as a flywheel fixed to a potter's wheel. Pottery production at the site may have continued into the early part of the fifth century and as such is one of the last known production centres of the Roman Nene valley pottery industry. The site is significant in that it probably represents a near complete and typical industrial pottery production unit within a major pottery production area of the province and represents an important aspect of the late Roman economy.     

Chronology during the Bronze Age in the archaeological site Tell Qubr Abu al-‘Atiq, Syria

Archaeosediments are deposits with a direct or indirect anthropogenic component. They provide useful information about past human activities and interaction with the environment. When other materials, such as pottery, are present in archaeosediment layers, the combination of TL ages from pottery and OSL ages from sediments can provide complete data about the occupation and evolution of an archaeological setting. In Mesopotamia, tells are mounds formed by the debris of human occupation and the accumulation of muddy sediments mainly due to the decomposition of mud bricks in ancient towns. Many other materials such as pottery fragments, bones and charcoal can be found in the sediment layers. The combination of OSL, TL and radiocarbon ages can be very useful in the case of the Bronze Age Period in Syria, allowing the occupation sequence of such archaeological sites to be reconstructed. Tell Qubr Abu al-’Atiq, is located on the left bank of the Middle Euphrates River (Syria). The archaeological artefacts found in the sediment layers (pottery) collected during excavations in two areas of the site, indicated the occupation of the tell during the Early and Late Bronze Age by typological pottery classification. The radiocarbon ages of charcoal indicate that human occupation fits the archaeological hypothesis, providing an older and maximum occupation period between 2800 and 2300 BC and a younger period between 1400 and 900 BC. OSL dating of sediments shows ages younger than charcoal, while TL ages of pottery are generally older than sediment and charcoal ages. This can be explained as the different materials correspond to different events. The charcoal and pottery correspond to occupation periods, while sediments correspond to the further destruction of the site.     

The mineralogy and petrography of Low Lands Ware 1 (Roman lower Rhine–Meuse–Scheldt basin; the Netherlands,Belgium, Germany)

Over the last 80 years Belgian, Dutch and German archaeologists working in the lower Rhine–Meuse–Scheldt basin have encountered a Roman pottery group that occurs in large quantities at most Roman sites in the region. Several researchers have separately tried to define this pottery, resulting in different names. Petrographic and geochemical analyses of 100 samples have now shown that the production of this ware predominantly made use of one source of raw material, divisible into three sub-groups on the basis of technological choices. The probable source lies in the early-Pleistocene Tegelen-formation, a clay rich in muscovite mica and garnet, which outcrops in the tertiary Scheldt escarpment (Nl) and the campine microcuesta (B). On the basis of geographical characteristics, Roman finds and the presence of a large Medieval pottery industry, production in the Bergen-op-Zoom area is suggested. In view of these new findings the name ‘Low Lands Ware 1’ is introduced to refer to this pottery group.     

Pre-pottery farmers on the Pacific coast of southern Mexico

Large island-like shell mounds along the southern coast of Mexico are the earliest known archaeological sites on the Pacific margin of Mesoamerica. These aceramic deposits date to between 7500 and 3800 cal BP and have been interpreted as locations where foragers, living elsewhere seasonally on the coastal plain, harvested shellfish and other estuarine resources. Based on an accumulation of paleoecological data from elsewhere in the lowland Neotropics of Mesoamerica, southern Central America and South America we pose and provide a first test of an alternative subsistence model: that the Archaic Period populations in this area were slash and burn farmers. Burned maize phytoliths first appear in these sedimentary records at 6500 cal BP in association with macroscopic charcoal and forest disturbance plant taxa. Periodic burning and forest disturbance, consistent with farming activities, are also evident in the macroscopic charcoal record between 6500 and 4700 cal BP. Pollen, phytolith and charcoal records all point to sustained burning, forest disturbance and the cultivation of maize between 4700 and 3800 cal BP. These data suggest that people were slash and burn farming during the Archaic Period prior to the adoption of pottery and the proliferation of Early Formative Period villages and full-fledged agriculture based on near or total reliance on crop plants after ∼3800 cal BP.     

Attempts at thermoluminescence dating of fired materials from the Przeworsk Culture settlements

The thermoluminescence (TL) dating method has a significant measurement error margin reaching almost 10%. Due to this fact it could be considered as little effective in case of such sites from the Roman period as burial grounds with many artefacts useful for archaeological dating. However, for many settlements from this period, where pottery is the only kind of artefacts, the TL method can give notable results. The main purpose of the study was to make an attempt at TL dating of pottery and clay daub samples from the Nieszawa Kolonia and Kręcieszki sites and to compare the obtained dates with the results of archaeological dating of selected features from the Przeworsk Culture settlements. In the Kręcieszki site the fragments of burnt clay daub were dated by the TL method for the first time in the Lublin laboratory. It turned out that clay daub is an equally good dating material as pottery. It can be found that the TL dating of pottery from Nieszawa Kolonia confirms two stages of settlement. The first settlement stage is related to the phases B2-B2/C1-C1a of the Roman period, i.e. from the beginning of the 2^nd to the beginning of the 3^rd century. The second group of TL dates corresponds to the phases C2D that is to the second stage of settlement, from the second half of the 3^rd century to the half of the 5^th century AD. The results of TL dating of pottery and clay daub in the Kręcieszki site are rather similar and correspond to the phase B1/B2 of the period of Roman influence, determined from pottery style, but can also indicate the phase B2/C1.     

New dates from Ushki-1, Kamchatka,confirm 13,000 cal BP age for earliest Paleolithic occupation

For many years cultural layer 7 at the Ushki sites, Kamchatka was considered to represent the earliest human occupation of Beringia, because four radiocarbon dates indicated an age of 16,000–17,000 calendar years ago (cal BP). In 2003, however, Goebel et al. reported that layer 7 more likely formed only 13,000 cal BP, nearly 4000 years later than N.N. Dikov, the site’s primary excavator, originally reported. Some researchers have downplayed the significance of the new dates, continuing to regard Dikov’s early dates as evidence that at least some of the hearth and dwelling features previously excavated at Ushki-1 date to as early as 17,000 cal BP. Here we present four new radiocarbon dates (and two previously unpublished dates) on curated charcoal from hearth features excavated at Ushki-1 more than 20 years ago. They indicate that these hearths and associated dwelling features date to about 13,000 cal BP. We now know 15 radiocarbon dates on charcoal from a variety of features and profiles across Ushki-1 and Ushki-5 that indicate the age of layer 7 is about 13,000 cal BP. We discount the four 16,000–17,000 cal BP dates, first, because two of them came from a deeply dug human burial pit and were likely secondarily introduced into the burial; second, because provenience data for the other two dated samples were never reported and do not exist in the records of the radiocarbon laboratories that produced them; and, third, because sediments immediately underlying layer 7 at Ushki-1 are only a few centuries earlier than 13,000 cal BP, providing an important lower-limiting age for the layer-7 occupation. We conclude that the age of all of the layer-7 features at Ushki-1 and Ushki-5 should be considered to be about 13,000 cal BP, at least until the earlier obtained old dates of 16,000–17,000 cal BP can be replicated.     

Cesium magnetometer surveys at a Pithouse Site near Silver City,New Mexico

The La Gila Encantada Site is located on an isolated ridge top north of Silver City, New Mexico in an area defined culturally as the Mimbres Mogollon region. The 180 m × 80 m (14400 m²) sized site was originally recorded as a dense scatter of ceramics, lithics, and ground stone along with a number of surface depressions that appear to represent pithouses. Cesium magnetometer surveys were conducted to identify hearths, pithouse boundaries, and activity areas outside of pithouses in support of archaeological investigations, and to test this instrument's ability to image these features. This paper presents a characterization of the magnetic signature of a pithouse as a magnetic high in the center caused by the central hearth, low magnetic variability along the floor of the house, and then increased magnetic variability at the pithouse boundary. This characterization was successfully confirmed for three pithouses using cesium magnetometery and archaeological excavation.