Possible evidence of bone tool shaping by Swartkrans early hominids

Ever since Dart (J. Phys. Anthrop. 7 (1949) 1) interpreted certain bones from Makapansgat as tools, scientific consensus has fluctuated as to whether some bone objects from early hominid sites should be interpreted as artefacts, or the result of non-human taphonomic processes, which are known to produce pseudo-bone tools morphologically similar to human modified or used artefacts. Here we present possible evidence of bone tool shaping from Swartkrans (Members 1–3; ca. 1.8–1.0 Mya). Four horncores and the proximal end of an ulna used as tools in digging activities also have facets covered by parallel spindle-shaped striations characteristic of grinding. Identification of these traces as possibly resulting from deliberate shaping or re-sharpening of the bone tools is based on the characterisation of the use-wear pattern and other taphonomic modifications observed on the Swartkrans bone tools. This interpretation is also supported by the study of the remainder of the horncores from Swartkrans, horncores from other southern African Plio-Pleistocene sites (Sterkfontein, Makapansgat, Gondolin), modern horncores affected by pre- and post-mortem modification, ethnographic, LSA, African Iron Age and experimental bone tools shaped by grinding. These data suggest that early hominids had the cognitive ability to modify the functional area of bone implements to achieve optimal efficiency.     

Middle Stone Age bone tools from the Howiesons Poort layers,Sibudu Cave,South Africa

Recently discovered bone implements from Middle Stone Age (MSA) deposits at Sibudu Cave, South Africa, confirm the existence of a bone tool industry for the Howiesons Poort (HP) technocomplex. Previously, an isolated bone point from Klasies River provided inconclusive evidence. This paper describes three bone tools: two points and the end of a polished spatula-shaped piece, from unequivocal HP layers at Sibudu Cave (with ages greater than ∼61 ka). Comparative microscopic and morphometric analysis of the Sibudu specimens together with bone tools from southern African Middle and Later Stone Age (LSA) deposits, an Iron Age occupation, nineteenth century Bushman hunter-gatherer toolkits, and bone tools used experimentally in a variety of tasks, reveals that the Sibudu polished piece has use-wear reminiscent of that on bones experimentally used to work animal hides. A slender point is consistent with a pin or needle-like implement, while a larger point, reminiscent of the single specimen from Peers Cave, parallels large un-poisoned bone arrow points from LSA, Iron Age and historical Bushman sites. Additional support for the Sibudu point having served as an arrow tip comes from backed lithics in the HP compatible with this use, and the recovery of older, larger bone and lithic points from Blombos Cave, interpreted as spear heads. If the bone point from the HP layers at Sibudu Cave is substantiated by future discoveries, this will push back the origin of bow and bone arrow technology by at least 20,000 years, and corroborate arguments in favour of the hypothesis that crucial technological innovations took place during the MSA in Africa.     

Investigating the potential of micro-focus computed tomography in the study of ancient bone tool function: results from actualistic experiments

Many experiments have sought to recreate the types of damage that would be expected in ancient stone and bone weapon tips. This damage is usually presented as visible fractures or microscopic surface modification. Fatigue tests conducted on bovine bones, however, show the development of internal micro-cracks that result from stress, prior to actual breakage. In this paper I present the results of an experimental investigation of bone points subjected to a variety of activities. I assess the presence of microdamage using micro-focus computed tomography. The results show that two patterns of micro-cracks develop in bone and are best viewed in longitudinal section. Micro-cracks are a cumulative feature dependent on the amount of load applied and the duration of activity. When subjected to high enough loading rates, micro-cracks will merge together to eventually form a fracture. Although further tests are needed to confirm the exact point at which these fatigue fractures begin to form, micro-focus computed tomography has the potential to reveal whether an individual bone point underwent multiple or prolonged impacts and thus to elucidate the probable function/s of ancient pointed bone tools where no visible damage is apparent. Micro-focus computed tomography is a non-destructive and non-invasive procedure and therefore safe to use on archaeological artefacts.     

Evidence in the Private Sphere: Assessing the Practicality of Amnesties to Record Lost Information

Archaeological sites on land and underwater have long suffered from human impact in the form of looting, souvenir hunting or treasure hunting. Some countries have declared archaeological amnesties to either acquire lost or stolen artefacts or to document collections and information held in private hands. Very little information has been published to date on archaeological amnesties around the world. For maritime-related or submerged sites, there have been three amnesties declared around the world: in Australia, in the United Kingdom and in Bermuda. Whilst there are obvious benefits to having amnesties, they can also prove costly if little thought has been given for the short- and long-term consequences. How much information is derived from these private collections is dependent upon how much information the collector is able or willing to provide and how much effort is made to document information before they are permanently lost.     

Diagenesis in bone and enamel apatite carbonate; the potential of density separation to assess the original composition

This paper presents a new approach to the isotopic measurement of diagenetically altered archaeological bone apatite carbonate. We describe how the existing differential dissolution method may be combined with a new approach to remove diagenetically reformed material on the basis of its greater specific gravity. We show that heavier, more diagenetically altered fraction has a higher (altered) δ¹³C and also increased crystallinity within one individual. In addition, we proposed one potential tool to check the validity of bone carbonate by comparing bone collagen, enamel carbonate and bone carbonate values of δ¹³C and radiocarbon content from the same individual. In the case of Danebury cattle, we estimated the biogenic δ¹³C_apa value for DC83 and DC89, although it is still difficult to overcome diagenesis in order to meet the expected value, which is shown to be 1.9‰ (DC83) and 3.5‰ (DC89).     

Identification of fragmentary bone from the Pacific

We explore bone microstructure for taxonomic identification of archaeological bones too fragmentary to permit secure identification on morphological grounds. Backscattered electron (BSE) imaging is used to observe bone tissue types and the arrangement of vascular canals, and to facilitate quantification of osteonal canal dimensions. Examination of known examples of relevant taxa (humans [n = 8], pigs [n = 4] and dogs [n = 4]) shows significant differences among them. When the results of this examination are applied to a blind test of modern and archaeological specimens (humans [n = 8], pigs [n = 2]), 100% of specimens are identified correctly. The approach is applied to 13 morphologically unidentifiable fragments from Hawai’i and Fiji to evaluate its potential for identifying bone tools and to increase the number of samples available for dietary analysis. Potential applications of the approach for other contexts are discussed.     

Application of a new typological approach to classifying denticulate and notched tools: the study of two Mousterian lithic assemblages

Identifying tools by means of morphological attributes are widely used in lithic studies to categorize retouched artifacts from different archaeological periods. This procedure has facilitated the exchange of information between separate researchers and has improved the comparison of different assemblages. In these classifications, denticulates and notched tools have been regularly interpreted as analogues and chronologically unvaried in different and vast territories. Based on the definitions developed by Bordes, the denticulate category has become a catchall for any kind of tool bearing concavities. In this paper a new quantitative approach to the classification of denticulates and notched tools is proposed. The new methodology is based on measuring the length of notches and their distribution on the perimeter of the blank. Analyzing the lithic series of the Abric Romaní rock-shelter (Spain) and Grotta Maggiore di San Bernardino (Italy) led to the identification of 11 redundant forms: eight denticulates and three notched tools. Moreover, the application of Kuhn’s Geometric Index of Unifacial Reduction brought local manufacturing trends to light, calling into question the presumed geographical uniformity of these categories of artifacts.     

Evidence of early medieval trade and migration between Wales and the Mediterranean Sea region

Imported Mediterranean pottery recovered from 5th–7th century settlement sites along the south Wales coast indicates that trade and contact between Wales and Byzantium continued following the collapse of the Roman Empire in the early-5th century. It is hypothesised that people as well as pottery continued to travel to Wales from Byzantium, some of whom subsequently settled amongst the local communities. Strontium and oxygen isotope analysis was undertaken on human remains (n = 33 individuals) from four early medieval cemeteries from south Wales. The study identified individuals who may not have been local to the British Isles, thus demonstrating that the isotopic analysis of human remains from Wales can further our understanding of migration to Britain during the early medieval period.     

The early neolithic pottery of the volga-ural region (based on the materials of the elshanka culture)

This article deals with the technologies of pottery-making used by the population of the Volga-Ural region during the Early Neolithic. The analyzed assemblage includes 344 specimens of ceramics (conventionally regarded as separate vessels) from 12 sites of the Elshanka culture (end of the 7th–6th millennium BC). The research method elaborated by A.A. Bobrinsky is based on binocular microscopy, use-wear analysis, and physical modeling. The origins and evolution of the Early Neolithic ceramic traditions in the Volga-Ural region and the role of their admixture are discussed.     

Implications of heat-induced changes in bone on the interpretation of funerary behaviour and practice

Bones submitted to heat experience structural and chromatic modifications. In particular, heat-induced bone warping and thumbnail fractures have been linked to the burning of fleshed and green bones – where the soft tissues have been removed from the bones soon after death – in contrast to dry bones. Those have been suggested as indicators of the state of the individual before being burned thus allowing inferences about the funerary behaviour of archaeological populations. A large sample of 61 skeletons submitted to cremation has been examined for the presence of both of these heat-induced features. Although uncommon, bone warping and thumbnail fractures were present in some of the skeletons demonstrating that its presence is not restricted to the burning of non-dried bones as generally believed. Rather than being an indicator of the presence of bones with soft tissues, bone warping seems to be more of an indicator of the preservation of collagen–apatite links which can be maintained on dry bones with low collagen deterioration. In addition, our results also do not confirm thumbnail fractures as an exclusive sign of the burning of bones with soft tissues. As a result, these heat-induced changes should be used with caution when trying to infer about the pre-burning state of an individual.     

Insights into early Middle Palaeolithic tool use and hafting in Western Europe. The functional analysis of level IIa of the early Middle Palaeolithic site of Biache-Saint-Vaast (France)

Results are presented from the functional analysis of a large selection of tools from level IIa of the early Middle Palaeolithic site of Biache-St-Vaast (France). Results indicate that the site represents a hunting stand with a strong focus on hunting and animal processing activities, next to a maintenance component that appears to concern retooling and repair activities in preparation of the hunting episode(s). In spite of the site's age, a large part of the tool assemblage proves to have been used while hafted. Expertise in hafting was even quite elaborate in the sense that it includes tools for which hafting is not essential. It confirms the importance of hafting studies for improving insights into assemblage variability and past human behaviour.     

A new statistical approach for determining the crystallinity of heat-altered bone mineral from FTIR spectra

The crystallinity of bone mineral represents an established method of measuring heat-induced change and is of importance to fields including material science, clinical science, anthropology and archaeology. A commonly used technique involves the calculation of the Crystallinity Index (CI) using selected peaks from Fourier Transform Infrared (FTIR) absorbance spectra. However, the choice of peaks has to date not been statistically justified. In this study a novel application of statistical techniques to the FTIR spectra of bone samples burned in the range 100 °C–1100 °C has been used to identify 5 new spectral indices of heat-induced crystallinity change. The validity of the new indices was tested by using a statistical classification model (LDA) to predict the burning temperature of a set of 108 bone samples burned between 100 °C and 1100 °C. A correct classification rate (CCR) of 97.2% was obtained when a combination of 4 indices including the CI was used. This was significantly better than the CCR of 66.7% which was obtained when the CI was used on its own.     

Raspadita: a new lithic tool from the Isthmus of Rivas,Nicaragua

A new lithic tool type was discovered at the Pacific Nicaraguan archaeological site of Santa Isabel (AD 800–1350) and named raspadita (small scraper). Thousands of these small tools (1–2 cm in length) were found. They have a rounded proximal edge and a pointed distal end. In this study, the raspaditas are proved to be a coherent tool class with minimal variation in size, shape, material type and usewear. They were manufactured from white chert bladelet cores using soft hammer percussion and pressure flaking unifacial retouch. Usewear points to a composite tool form and a scraping function for the raspaditas. Scanning electron microscopy determined a ventral leading, dorsal following, unidirectional scraping motion for the raspadita proximal end. The material that was scraped has still to be definitely determined but phytoliths visible in the SEM images suggest that the composite tool was used for plant processing.     

A radiographic study of the extent of variation in cortical bone thickness in soay sheep

In order to assess the effect of nutrition on bone mass, radiographs of metopodia from skeletal collections of Soay sheep (Ovis aries) were taken of animals subject to seasonal stress (from the island of Hirta, Hebrides) and those living in good nutritional conditions (from the Institute of Animal Physiology, Babraham, Cambridge). A third set of radiographs was taken at 3 month intervals over a single year on living Soay sheep kept under good conditions at the Rowett Research Institute, Aberdeen.Measurements were taken on the radiographs of length, minimum shaft width (SW) and medullary cavity width (MCW), while combined cortical thickness (CCT) was calculated. The ewes from Hirta had significantly lower values for CCT than those from Babraham, whereas the rams showed no significant reduction in CCT. Since no seasonal variation in CCT was detected in the well nourished Rowett ewes, this indicates a differential effect of poor environmental conditions on bone metabolism in ewes. It is proposed here that this may be related to the additional stress imposed by gestation and lactation on female animals living under conditions of seasonally restricted food supply.     

明初湟水流域汉族社会之政治管理体制

明朝初年,由于蒙古势力盘踞青海海西,南部又有藏族势力,湟水流域安危举足轻重。为此,明朝中央在此设置军民卫所、屯田、驻军等制度。由于这些制度起到了稳定边防之作用,因而一直沿袭到清朝雍正初年,成为明清时期中央朝廷管理青海汉族社会的主要模式。且在此基础上,湟水流域汉族社会逐渐形成了以堡、寨为主要形式的基层社会结构,一直沿袭到现在。本文着重就明初中央朝廷关于湟水流域汉族社会的政治管理体制作一详细梳理。     

试论清末民初大众媒体对女子学校教育的影响

清末至民初各种大众媒体关注女子解放问题,不仅全方位抨击当时为女子学校教育兴起造成困难的缠足风俗,帮助广大妇女解放双足,并积极报道西方女子的学校教育情况,大力提倡新式女学,为女子学校宣传助威,还利用舆论的力量逐步推进女子学校教育的合法化、正规化。大众媒体的宣传为女子教育的发展奠定了基础和铺平了道路,对女子学校的教育影响巨大而深远。     

Stable isotope data from the early Christian catacombs of ancient Rome: new insights into the dietary habits of Rome's early Christians

This study reports on the first attempt that determines the diet of a small but conceivably representative section of Rome's early Christian community by means of δ¹³C and δ¹⁵N measurements on collagen extracted from twenty-two samples of human bone. Samples derive from the Liberian Region in the catacombs of St. Callixtus on the Appian Way—an area that has been radiocarbon dated to the period from the mid-3rd through early 5th century AD. Comparing our results to those produced for several other sites, we argue that this population's typical diet included freshwater fish. We also briefly discuss breastfeeding and the freshwater reservoir effect, to then explore the dietary, art historical, and possible sociological ramifications of our results.