The conundrum of castration in the archaeological record: An interpretation of Roman cattle horn-cores from Chelmsford,Essex

Current methods of sexing archaeological cattle bones, in particular the metapodials, are based upon past research into contemporary breeds and this work embraces a limited sample size, spread across a vast geographical area. Although the separation of cows and bulls is not in question, there appears a great deal of subjectivity in the literature concerning the identification of castrated beasts. Living bone is in a dynamic state of equilibrium with the rest of the body and responds to increased loading, that is, an increase in weight of the beast or stress/strain through strenuous movement, by remodelling. If cows and oxen are performing the same work, as for example in ploughing, then loading on the bones will be similar. These bones will thus respond by remodelling in corresponding fashion, and hence any morphological and metrical distinctions will be clouded. Horn-cores are less subject to these constraints, although in some cultures there may be loading on these bones, for example through attaching the harness to the horns for ploughing. The Chelmsford cattle horn-cores constitute waste from some industrial activity and it is argued in the text that horn-working is the most likely candidate, together with possibly tanning. Sexing of the bones strongly indicated male animals, with few females being present. A procedure for detecting castrated cattle (oxen) is presented, the results of which suggest an equivalent ratio of oxen to bulls.     

Ontogenetic scaling and lithic systematics: method and application

Stone tools tend to be classified according to a mix of functional, morphological, and technological attributes. This practice results in confusions when large-scale assemblage comparisons are made with the aim of investigating phylogenetic relationships, as functional and cultural information is aggregated. It is argued here that functional criteria must be assessed separately, and that resharpening, as a uniform, repeated, conscious behavioral process of tool maintenance that indexes use and function, can provide a solution to this problem. The subject of this article is a quantitative method for extracting and comparing resharpening trajectories. The method is an adaptation of ontogenetic scaling methods from biology, and is based on obtaining a mathematical representation of shape and size, and finding a relationship between the two. Elliptical Fourier analysis is applied to stone tool contours in order to extract shape information, and then a series of regressions of shape on size provide trajectory vectors. The angles between these are then calculated and subjected to a variety of multivariate statistical tests. A case study involving several European Middle Paleolithic bifacial and unifacial tool assemblages is presented. The results show that resharpening and maintenance can be independent of morphology and technology, suggesting that there are strong grounds for focusing on functional systematics separately.     

Using Enthesis Robusticity to Infer Activity in the Past: A Review

In bioarchaeological studies, entheseal change is commonly used to infer patterns of activity in past populations. This category of skeletal modification includes both pathological changes (enthesopathies) and changes in size, shape and surface complexity (robusticity). Despite the recent impetus to reassess the use of enthesopathies as markers of activity, robusticity has received little critical attention. In this review, we reassess key assumptions that underpin the use of robusticity in activity studies, drawing on anatomical, physiological, biomechanical and sports medicine literature sources. We find that, whilst there is some evidence to support the assumption that variation in enthesis robusticity reflects different activity patterns, little is known about the process through which this variation is produced. Presently, the stimuli (dynamics of muscle use or muscle size) for entheseal adaptation are ill-defined, a situation that limits our interpretive abilities. Consideration of bone functional adaptation principles and of the relationship of entheses to soft tissue also highlights how other factors, such as age, sex and genetic background, may influence enthesis robusticity and obscure activity-related adaptation. Understanding how these factors influence enthesis robusticity helps define how robusticity studies should be controlled, but further research is required to clarify how these factors interact with activity in robusticity development and the precise relationship between activity and robusticity. Ultimately, this review emphasises the complexity of entheseal structures and their morphological development. Any interpretation of activity from enthesis robusticity should be approached with caution, but in some circumstances, the endeavour may be ill-advised.     

Global Metropolitan-Regional Scale in Evolution: Metropolitan Intermediary Cities and Metropolitan Cities

The case of Madrid is used as empirical focus to propose a new classification of the metropolitan region urban medium-sized or secondary city system. Based on a methodology that integrates the morphological (size, location and socioeconomic history) and the functional dimensions (centrality index, advanced producer services (APS) concentration and commuting), the article compares new employment centres—cities with metropolitan origin—and historical cities—previously free standing cities, progressively integrated in metropolitan processes. The results show a distinction between (1) metropolitan cities, with a traditional intermediation role, and (2) metropolitan intermediary cities, that include an additional quality to their traditional intermediation role, that of concentrating APS. The article confirms that some medium-sized cities—metropolitan intermediary cities—linked to different origins and up to 100?km away from the metropolis are more visible in the global scene and are establishing an emerging global multicore-network at a metropolitan-regional scale.     

Modeling skeletal traits and functions of the upper body: Comparing archaeological and anthropological material

The aim of this study is to look at upper body functional modifications caused by mechanical loading. We look at 4th lumbar vertebra as well as fibrous humeral musculoskeletal stress markers (MSMs). This study uses information provided by magnetic resonance images of living individuals from the University of Oulu Hospital data banks (N = 91), archaeological skeletons from Sweden (N = 54) and England (N = 61), and autopsied skeletal collection of early 20th century Finns in Natural History Museum, University of Helsinki (N = 48). The lumbar vertebrae and MSM are subjected to mechanical loading caused by the upper body weight and loads lifted and/or carried. We hypothesized that the vertebral size reflect body size, habitual mechanical loading and the overall skeletal robusticity as mechanical competence to withstand mechanical loading standardized to body size, which has decreased over millennia. For Helsinki material occupation, age and sex is known and the material was used in Niinimäki (2011). In the study by Niinimäki (2011) MSM were found to be affected by the intensity of muscular action as well as body size and age. This study is reviewed here in light of re-analysis of the data to follow the current anatomical understanding of the entheses as well as viewing MSMs as a part of upper body functional complex. Only fibrous entheses were included in the re-analysis. Furthermore, due to small number of females where activity intensity could be assessed, females were dropped from the re-analysis.     

Experimental effects of bone size and temperature on bone diagenesis

In the ground, bone undergoes chemical and physical changes which affect its preservation. This fact has important implications for dating and other analytical procedures involving bone, as well as faunal analysis where differential preservation of bones of different species may affect conclusions regarding the relative significance of an animal to the economy of a given society. The diagenic processes in bone range from minor changes in the bone protein to complete structural and chemical breakdown.Using fresh cow bone, we conducted laboratory experiments which simulate the effect of temperature and bone size on the rate and nature of bone disintegration in archaeological sites. Temperature influences the rate of chemical change, and bone size and density affect the accessibility of the molecular constituents of bone to extrinsic chemical reactions. These findings clarify the importance of two well-known concepts in bone taphonomy. (1) The rate of chemical breakdown in bone tissues is related to the proximity of a given unit of tissue to the bone surface. This means that, in archaeological bone samples, tissue near the surface may be different chemically from tissue away from the surface and great care is necessary in choosing and preparing bone samples for analytical procedures. (2) In general, small bones are not as well preserved as large bones, therefore small animals are likely to be underrepresented in faunal assemblages.     

A distinct region of microarchitectural variation in femoral compact bone: Histomorphology of the endosteal lamellar pocket

Bone is a dynamic tissue, responding locally to differential mechanical loading and systemically to hormonal stimuli. Although the tendency is to consider compact bone a homogenous tissue, regional variations in microarchitecture are known to have quite different properties relating to processes of growth and mechanical loading. Specifically, we investigated an example of microstructural variation of the human, adult femoral endocortex, referred to here as the endosteal lamellar pocket (ELP). The femoral ELP is characterised as a histomorphological meta‐feature, made distinct from general circumferential lamellae by its hemicircumferential lamellar orientation, medial positioning, radially oriented Volkmann's canals and decreased presence of Haversian systems. Our preliminary observations of mid‐diaphyseal transverse thin‐ground sections demonstrate the ELP as a regular meta‐feature of adult human femora unearthed from the Maya archaeological site of Xcambó, Mexico. ELPs were easily identified in 38 of 45 examined individuals. Their size, shape and degree of secondary remodelling were variable. In comparison, ELP lamellae and those originating from the periosteum are divergent, or non‐concentric in orientation. This divergence, along with the ELP's medial position, suggest it forms during growth through endosteal modelling drift. Possible considerations for ELP formation and persistence with age are discussed as well as its implications for the study of bone dynamics during growth and activity. Further research is necessary to quantitatively measure the morphology of ELPs and to identify any co‐variance between ELP characteristics and age, sex or indicators of mechanical loading. Copyright © 2010 John Wiley & Sons, Ltd.     

Compensatory bone remodelling in moose: a study of age,sex, and cross‐sectional cortical bone dimensions in moose at Isle Royale National Park

We studied interrelationships among age, sex, and cross‐sectional cortical bone dimensions using quantitative computed tomography (QCT) scans of metatarsal bones of 180 moose (Alces alces) that died in Isle Royale National Park, Michigan. As a large‐bodied quadruped with demanding ecological constraints on movement and behaviour, a moose experiences different weight‐bearing and mechanical stressors than humans, to whom most existing studies of mechanical adaptations of bone pertain. In moose, both sexes showed significant subperiosteal expansion and an increase in medullary area, with an overall increase in cortical bone area over time. Female moose did not exhibit cortical thinning or reduction in cross‐sectional area with age, rather they showed an increase in cortical bone area with periosteal apposition exceeding endosteal resorption, similar to the males. We also found that moose undergo changes in bone geometry through remodelling of bone similar to humans, suggesting a compensatory mechanism for increasing bone strength under conditions of decline in bone mineral density with age. Copyright © 2002 John Wiley & Sons, Ltd.     

Bone preservation in human remains from the Terme del Sarno at Pompeii using light microscopy and scanning electron microscopy

Archaeological bone can show marked and complex alterations depending on the environment in which it was buried. In this study, the state of preservation of 27 femurs recovered from the archaeological site of Pompeii was evaluated by light microscopy and scanning electron microscopy. Most of the bone samples, prepared by the grinding method, showed good histological preservation, although they were characterized by microfissures (microcracking). Nine bone samples showed different states of histological preservation, including worst preservation (two femurs), due to diagenetic processes. Cryostat bone sections stained with thionin or 4′,6′-diamidino-phenylindole (DAPI) revealed the persistence of DNA within some osteocyte lacunae. Scanning electron microscopy analysis showed that ultrastructural characters, such as lamellae and collagen fibres, are recognizable only in unaltered bone. Our results reveal that most Pompeian samples are well preserved since they have a bone microstructure virtually indistinguishable from that of fresh bone. In methodological terms, although each of the various morphological methods used contributes information, histological and histochemical analyses are the most informative for studying the preservation state of bone and allow for rapid essential screening of archaeological bone.     

Temporal changes in Arikara humeral and femoral cross-sectional geometry associated with horticultural intensification

Humeral and femoral cross-sectional properties from three archaeological variants of the Arikara, an American Great Plains Indian tribe, were analyzed for temporal (16th to 19th centuries) changes in long bone architecture, asymmetry, and sexual dimorphism associated with intensification of horticulture during the late protohistoric and early historic periods. There were a number of significant changes in long bone, especially femoral, cross-sectional morphology and asymmetry among females through time that probably reflect increases in the workload necessary to produce surplus crops. Changes in long bone architecture among males are restricted to the humerus and may reflect a greater reliance on firearms. The pattern of sexual dimorphism also changes through time among the Arikara due to a combination of environmental (nutrition and disease) and mechanical factors.     

Lithic Economy and Specialized Activities Among the Iberomaurusian Populations of Tamar Hat Rockshelter (Northeastern Algeria)

Tamar Hat rockshelter (Béjaïa, northeastern Algeria) has yielded a lithic assemblage showing general characteristics of an Iberomaurusian Early Late Stone Age nature. Specific “becs,” which we shall call “becs of Tamar Hat,” appear as an important component of the assemblage in the upper occupations, which occurred at the end of Late Glacial Maximum. These becs, from a technological point of view and especially by their shaping processes, constitute a reliable reference collection, though showing morphological variability resulting in part to the reduction process. The use-wear analysis conducted, based on a microscopic examination validated by experimentation, testifies the becs would have functioned for engraving hard bone, such as those of deer. Other scars observed on the sharp edge and lower face near the active portion of the tool are caused by hafting. Hence, the results of the technological and functional analyses of the becs from Tamar Hat reveal the presence of specialized activities in the upper occupations, related to the animal bone processing. These results are supported by the archaeozoological study, which confirms that the site functioned as a seasonal habitat, where Megacerin deer was exploited in the upper occupations for utilitarian, non-food purposes. The emergence of the use of the becs of Tamar Hat is synchronous with the end of the Upper Paleolithic, prior to the expansion of bec use in the Upper Magdalenian of Europe, where technical and stylistic convergences were observed. This raises the question of the emergence of these lithic implements in North Africa and the possible spread of similar industries elsewhere.     

Sources of variation in carnivore tooth-mark frequencies in a modern spotted hyena (Crocuta crocuta) den assemblage,Amboseli Park,Kenya

Distributions and frequencies of carnivore tooth-marks on large mammal long-bone fragments are commonly used to infer the timing of hominin and carnivore access to prey resources in archaeofaunal assemblages. The strength of these inferences, however, is limited by a broad and currently inexplicable range of tooth-mark frequencies across experimental and archaeological assemblages. Controlling for this variation first requires that the sources be identified. Several sources of variation are examined here in an analysis of tooth-marked bone recovered from a modern spotted hyena (Crocuta crocuta) den assemblage in Amboseli Park, Kenya. Results indicate that tooth-mark frequencies: (1) depend on fragment size, (2) vary across mammals of different size classes, (3) are highly variable across equivalent portions of different long-bone elements, and (4) on certain long-bone portions are correlated with bone density and can be depressed in archaeological assemblages subjected to density-mediated attrition. Stronger inferences based on tooth-mark frequencies will require that such variation be taken into consideration, and methods for doing so are suggested.     

An investigation of cortical bone loss and fracture patterns in the neolithic community of Çatalhöyük,Turkey using metacarpal radiogrammetry

Bioarchaeologists have conducted numerous studies on human skeletal remains using metacarpal cortical bone radiogrammetry. This method allows cortical thickness of the second metacarpal to be quantified. As a sensitive index of bone health metacarpal cortical thickness is evaluated in the context of functional adaptations, growth, ageing and bone loss in osteoporosis, as well as used as a reliable indicator of fracture risk. The focus of this study is an examination of the widely used calculation that expresses second metacarpal cortical bone values, followed by an examination of age and sex-related patterns of cortical bone loss and skeletal fragility fracture in a Neolithic archaeological skeletal sample from Çatalhöyük, Turkey. Using metacarpal radiogrammetry, 49 adult metacarpals (f = 27 m = 22) were examined. Data were collected for size variables, length (L) and total bone width (TW) as well as quantity variables, medullary width (MW) and cortical thickness (CT). These parameters were then used to calculate the widely used cortical index (CI) and two new indices expressing medullary width and cortical bone thickness in relation to length (medullary width index, MWI and cortical thickness index, CTI). The ratios were then used to explore age- and sex-related cortical bone loss and fragility fracture patterns amongst the inhabitants of Çatalhöyük. Çatalhöyük males and females demonstrate an inverse relationship where CTI decreases as age and MWI increase. Analyses indicate statistically significant age-related change in MWI amongst the oldest females. Despite age-related loss of bone, no typical fragility fractures are observed. We discuss the role of ageing and lifestyle factors at Çatalhöyük that may have been beneficial to skeletal health and a reduction in the risk of fragility fracture.     

Size and shape of the Eurasian wild boar (Sus scrofa), with a view to the reconstruction of its Holocene history

Abstract

A large assortment of skulls and skeletons of recent wild boar (Sus scrofa) from across the world has been used to collect tooth and bone measurements that can be compared to those from archaeological specimens. The data provide useful information for a reconstruction of the Holocene history of the species. The evidence collected so far highlights the great variability of the species and provides a baseline to be used for the interpretation of ancient material. It is shown that not only the size, but also the shape of teeth and mandibles can help in highlighting patterns of variability in wild boar from different areas. A number of geographic trends are identified in the variation of S. scrofa across its range, mainly concerning the differentiation of insular forms, and the existence of South–North and West–East clines. Other factors such as hybridisation with domestic stock, feralisation and human-induced movement of animals may also play an important role. A comparison with ancient material emphasises the existence of similarities as well as differences between modern and ancient populations. Although some of the geographic trends identified on the basis of the analysis of modern material seem to date back to early Holocene times, the morphological history of the species appears to be complex, and in more than one area fluctuations in body size seem to have occurred.     

Changes in human bones boiled in seawater

The differences between boiled or unboiled bones are not often studied. However, they are crucial to understand postmortem rituals and to establish defleshing procedures and mortuary practices. In this work, human bones boiled in sea or fresh water are characterized. The bone composition, as well as the compounds present in the resulting materials, shows that salt alters the boiling process mechanism. Hence, from structural and morphological criteria, it is possible to distinguish if a bone has been boiled in salt or fresh water. In both sets of samples, the smoothness of the bone surface depends on boiling time, but only in bones boiled in seawater, filaments are observed apparently pouring out of the pores.Those differences which are mainly morphological (smoothness of the surface) are explained in terms of a collagen diffusional mechanism favored by sodium and chloride ions. For a boiling time of 6 h, the surface is covered by a thick layer or crusts of degraded collagen. Experiments with seawater may be used as model experiments to simulate taphonomical alterations in bones exposed to salt water.     

New Data on South American Camelid Bone Size Changes during Middle‐Late Holocene Transition: Osteometry at Peñas Chicas 1.5 (Antofagasta de la Sierra,Argentinian Puna)

Approaching the study of camelid bone size change in the meridional portion of the South Central Andes is a significant subject especially when the assemblages are associated to radiocarbon dates placed at a time of social transition from an extractive to a producer economy. In this sense, this paper presents the results of applying osteometric techniques on a set of 10 elements from the Peñas Chicas 1.5 site dated around 3800 BP . The analysis shows the presence of at least three individuals, one of which corresponds to an Andean guanaco (Lama guanicoe) morphotype. The second and the third are similar in size to a modern llama (Lama glama) in their ‘intermediate’ and ‘cargo’ morphotypes. This is consistent with patterns already seen for sites from the Argentinian and Chilean Puna where the identification of larger individuals than the Andean guanaco modern standard shows the early stages of an increasingly bone size variability of South American camelids. This paper contributes with new data to understand the complex processes that occurred in the South Central Andes that led to the domestication of one of the most conspicuous animals in the archaeological record of the Argentinian Northwest. Copyright © 2012 John Wiley & Sons, Ltd.     

Factors affecting Early Stone Age cut mark cross-sectional size: implications from actualistic butchery trials

Early Stone Age cut marks are byproducts of hominins' tool-assisted animal carcass consumption and provide a potential avenue of inference into the paleoecology of hominin carnivory. If diagnostic cut mark characteristics can be linked to flake and core tool use or the completion of distinct butchery actions, it may be possible to infer ancient tool preferences, reconstruct the consumption of specific muscular tissues, and illuminate landscape-scale stone resource use. Recently, diagnostic morphological criteria including cut mark width and depth have been used to identify marks made by different classes of experimental and archaeological stone tools (Bello, S.M., Parfitt, S.A., Stringer, C., 2009. Quantitative micromorphological analyses of cut marks produced by ancient and modern handaxes. Journal of Archaeological Science 36: 1869–1880; de Juana, S., Galan, A.B., Dominguez-Rodrigo, M., 2010. Taphonomic identification of cut marks made with lithic handaxes: an experimental study. Journal of Archaeological Science 37: 1841–1850; Dominguez-Rodrigo, M., de Juana, S., Galan, A. B., Rodriguez, M., 2009. A new protocol to differentiate trampling marks from butchery cut marks. Journal of Archaeological Science 36: 2643–2654). The work presented here adds to this experimental butchery database by using measurements of cut mark cross-section taken from bone surface molds to investigate how stone tool characteristics including flake versus core tool type, edge angle, and tool weight, influence cut mark width and depth, ultimately testing whether cut mark size is a useful indicator of tool identity. Additionally, these experiments investigate the influence of contextual factors, including butchery action, carcass size, and bone density on cut mark size. An experienced butcher used replicated Oldowan flakes and bifacial core tools in experimental trials that isolated skinning, bulk and scrap muscle defleshing, and element disarticulation cut marks on goat and cow skeletons. This sample explores cut mark traces generated under realistic butchery scenarios and suggests the following results: 1) Core and flake tools were equally efficient at completing all butchery tasks in size 1 and 3 bovid carcasses. 2) Samples of cut mark width and depth produced by core and flake tools were similar and cut marks could not be accurately classified to a known tool type. 3) Skinning and disarticulation activities produced significantly wider and deeper marks than defleshing activities. 4) Cut marks on cows tended to be wider and deeper than those on goats. 5) Cut mark width is negatively correlated with bone density when carcass size and bone portion are taken into consideration. These results suggest that a general quantitative model for inferring tool type or edge characteristics from archaeological cut mark size is not warranted.     

Metapodial asymmetry in draft cattle

Traction work by oxen has been well documented in various pictorial and written sources throughout human history. Analysis of metapodial dimensions has been carried out with the aim of quantifying asymmetry related to sexual dimorphism, body size and possibly heavy duty traction work. A modern reference sample of 103 animals from Hungary and Rumania has been used for this purpose. Bone measurements were correlated with bone density and morphological characteristics in order to make the results applicable for the identification of remains from draft cattle in archaeozoological assemblages. Asymmetry is more pronounced in the thoracic extremity and metacarpals of older or heavier animals, sometimes showing excessive widening of the third, medial ray within the fused bone. Relative broadening is also intensive in the distal end of medial metatarsals of cows and oxen. The bone mineral content of the medial carpal region attains mature density first. The weight of phalanges increases for a longer time in the laterally located toes.     

Technological,Functional and Contextual Aspects of the K2 and Mapungubwe Worked Bone Industries

Mapungubwe (AD 1220–1290) is generally regarded as the first urban centre in southern Africa, functioning as the seat of power for an extensive but short-lived polity. More than 80 years of excavations here, and at its nearby predecessor K2 (c. AD 1000–1220), resulted in a substantial assemblage of material remains from elite and commoner contexts. This assemblage includes a large collection of worked bone objects, such as needles, awls, tubes and objects of personal adornment. Of particular interest are the bone arrowheads and link-shafts, of which a significant number of specimens were found complete and intact. Such quantities of well-preserved worked bone objects are unique in the archaeological record of the region. The worked bone assemblages from these two sites provide a rare opportunity to study multiple components of the production process as well as the use context of bone objects. In this paper, we characterise the K2 and Mapungubwe worked bone industries through various morphological, technological, use-trace and contextual approaches and discuss the significance of these aspects in terms of raw material selection and manufacture and archaeological use context. In particular, this study shows the complexity of these worked bone industries over time.     

Bone weight,meat yield estimates and cod (Gadus morhua): A preliminary study of the weight method

Past approaches to the Weight Method (use of the weight of excavated bone assemblages to evaluate the relative potential meat yield of the animals from which they came) are critically reviewed. They do not account for both inter-taxon and intra-taxon variability in the relationship between bone weight and total body or soft tissue weight. Critics of the Weight Method have assumed that these problems are insurmountable. It is argued here that they can be overcome practically. Solutions lie in the integration of classic Weight Method approaches, which assume a consistent ratio of bone weight to body weight between different taxonomic and size groups, with the understanding of animal scaling provided by studies of skeletal mass allometry. Allometric equations derived from original data (regarding cod, Gadus morhua) and available from published sources (regarding mammals and birds) are used to illustrate this argument. Three practical approaches to the Weight Method are suggested and briefly explored, using bone weight data from Earls' Bu, a Norse site in Orkney, Scotland, as a case study.