Experimental series and use-wear in bone tools

This paper presents an experimental program and microscopic patterns identified in the analysis of five worked bone morpho-functional groups: harpoon heads, drilled points, bipoints, awls and smoothers.     

A useful measure of the desirability of different raw materials for retouch within and between assemblages: the raw material retouch index (RMRI)

Due to their predictable fracture and the quality of the edge that can be produced on them, fine-grained raw materials such as chert have long been favoured by prehistoric toolmakers for the production of relatively small retouched artefacts. It is common to find far higher frequencies of retouch in such materials than is the case in all other rock types. In order to quantify the desirability of different materials for retouch I propose a simple index relating the frequency of retouched tools in a raw material to the frequency of that material in the entire assemblage. Using the ‘raw material retouch index’ (RMRI) one can compare relative raw material desirability both within and between assemblages.     

Identifying grinding,scoring and rubbing use-wear on experimental ochre pieces

Ochre pieces were used experimentally for a variety of grinding, scoring and rubbing activities to record and compare the use-wear markings that each activity creates on the ochre piece. Ochre that is ground on coarse or fine-grained slabs develops parallel striations that cover the surface of the piece. The striations have unfrayed ends. Grinding is the only activity that results in significant changes to the surface shape of the ochre, producing a plane. When ochre is scored either to create a deliberate design or to produce powder, the grooves that form often do not reach all the edges of the used surface and they regularly have frayed terminations. This demonstrates that the incisions were created by multiple scoring strokes. When ochre is scored to manufacture ochre powder the incisions that are generated are parallel groups of grooves with erratically oriented grooves as well. Bone and wooden tools are soft and they therefore do not generally create obvious incisions on ochre pieces. Grooves created through grinding on a slab or scoring with a stone tool have microstriations within them and they show a range of profile shapes. The most common use-wear from rubbing ochre on animal hide, human skin, human hair and wood is smoothing, edge rounding and polish, although incisions and microstriations also occur occasionally. Residues are often left on an ochre piece after rubbing or scoring with organic materials. The comparative collection of macro- and microscopic use-wear marks from experimentally ground, scored and rubbed ochre is useful as an aid to classifying archaeological collections of ochre.     

Oldowan behavior and raw material transport: perspectives from the Kanjera Formation

The archaeological record of Oldowan hominins represents a diverse behavioral system. It has been suggested that exploitation of lithic resources by Oldowan hominins was simplistic and represented mostly use of local sources of stone. Here we investigate the raw material selection and transport behaviors of Oldowan hominins reflected in the stone artifact assemblages from the Kanjera South Formation, South Rachuonyo District, Kenya. Using geochemical methods (ED-XRF) artifacts are linked to primary and secondary source outcrops throughout southwestern Kenya. These data show that hominins selected raw materials for transport at frequencies that are significantly different from their availability on ancient landscapes. Furthermore, a substantial proportion of the assemblage represents transport over relatively long distances (>10 km). Our study further suggests that in the early stages of stone tool use hominins used a wide variety of raw materials and selected these materials at some distance from their eventual discard locations. Early hominin behavior may have incorporated an understanding of raw material source distributions across a more extensive landscape than has been previously documented. This supports the growing perspective that Oldowan technology represents a more complex behavioral pattern than is usually associated with the beginnings of hominin tool use.     

Western Mediterranean sand deposits as a raw material for Roman glass production

During the Late Roman and Byzantine period, natron glass was made from its raw materials in a limited number of primary production centres in Egypt and Syro-Palestine. For the earlier Hellenistic and Roman period, no primary furnaces have been found and the location of primary production during this era remains unclear. Ancient authors such as Strabo and Pliny the Elder suggest that glassmaking sands were found near the River Belus (Israel), in Egypt, near the mouth of the Volturno River (Italy) and also in Spain and France. However, primary production in the western part of the Mediterranean is not supported by any direct archaeological evidence and possible sand raw materials from these regions have never been evaluated for their suitability to produce glass.     

Cross-cultural interaction on Wuvulu Island,Papua New Guinea: the perspective from use-wear and residue analyses of turtle bone artifacts

Recent studies have emphasized the importance of Indigenous producers and traders in the formation of ethnographic museum collections, but have found difficulty in finding concrete evidence for their active roles. A use-wear and residue study of turtle bone cleavers from Wuvulu Island, Papua New Guinea provides the opportunity to test whether objects that comprise a significant component of early collections were made specifically for sale, as hypothesized by contemporary observers in the late 19th century. Comparative studies of used and unused turtle bone artifacts from the Caroline Islands and Papua New Guinea identified differences between wear traces resulting from manufacture and use. Analyses of the Wuvulu turtle bone cleavers showed they had been heavily used prior to sale. Rather than produce artifacts to meet the high demand from German traders, the local people sold old, worn-out objects, many of which had been repaired. The study demonstrates that archaeological approaches to ethnographic museum collections can trace Indigenous agency within cross-cultural interaction. It also showcases the potential of use-wear and residue analytical techniques for the analysis of bone tools and the utility of digital, hand-held microscopes for the analysis of large artifacts.     

Raw material quality and Oldowan hominin toolstone preferences: evidence from Kanjera South,Kenya

The role of raw material quality in Oldowan technology has not been fully explored. There are numerous studies suggesting Oldowan hominins preferred certain types of stone for artifact manufacture. Previous studies of the artifact assemblage from the early Pliocene Oldowan locality of Kanjera South (South Rachuonyo District, Kenya) show that raw material selection and transport was an important aspect of Late Pliocene hominin adaptations. Yet the exact properties of stones that hominins were selecting remain enigmatic. Two potentially important features of artifact raw material are durability and fracture predictability. We investigate fracture predictability through mechanical tests of stone and investigations of the affect of stone properties on fracture patterns in archaeological collections. We investigate stone durability with actualistic studies of edge attrition combined with further mechanical tests of various lithologies. Oldowan hominins at Kanjera appear to have selected raw materials based on their durability. The ability for a stone to fracture consistently does not appear to be as important in hominin toolstone preference as previously assumed. Hominins that produced the assemblages at Kanjera South appear to have incorporated an extensive understanding of various attributes of raw material in the transport and production of stone artifacts. When combined with previous research on the transport patterns at Kanjera, the results of this study provide evidence for a more complex raw material acquisition strategy than has previously been suggested for Late Pliocene Oldowan hominins.     

Raw material economy in Salento (Apulia, Italy): new perspectives on Neanderthal mobility patterns

This paper presents a case study that questions the behavioral model of a “non-modern” provisioning of raw materials by Neanderthals. The Salento is a peninsula in south eastern Italy rich in Mousterian sites and Neanderthal remains. This region is particularly suitable for raw material economy studies, for its peninsular status and the scarceness of good raw materials. Surveys made in 2006 showed the pattern of utilization of different local raw materials (limestone, siliceous limestone) and the absence of good quality raw materials, that are present in archaeological record. A very long distance provisioning is supposed to be at the origin of their presence in Mousterian Salento sites.     

Lithic production,site formation and Middle Palaeolithic palimpsest analysis: in search of human occupation episodes at Abric del Pastor Stratigraphic Unit IV (Alicante,Spain)

We present the results of an exercise in Middle Palaeolithic palimpsest analysis geared toward the identification of human occupation episodes. It is based on a combined reading of the archaeosedimentary deposit and the archaeological record of Stratigraphic Unit IV from Abric del Pastor (Alcoy, Alicante, Spain), chronologically framed within MIS 4–5. A study of site formation processes coupled with archaeostratigraphic analysis of the lithic record incorporating Raw Material Units (RMU) and refits, as well as with combustion features and faunal remains enabled identification a minimum of 4 and a maximum of 6 human occupation episodes within lithostratigraphic units IVa, IVb and IVc. Through our data it reaches a high resolution temporal frame close to the ethnographic time scale, which constitutes a significant contribution for the knowledge of human occupations types and landscape use in the Mediterranean rim of the Iberian Peninsula during Middle Palaeolithic.     

Integrated geological,petrologic and geochemical approach to establish source material and technology of Late Cypriot Bronze Age Plain White ware ceramics

Late Cypriot Bronze Age Plain White Wheelmade ware samples from several Cypriot excavation sites and the northern Canaanite coast were studied to ascertain their production centres and details of their manufacturing processes and post-depositional alteration. The investigation of the ceramics, using combined geoscientific analytical techniques (XRF, ICP-MS, XRD and EPMA) allowed four groups of pottery to be distinguished based on their common raw-material sources and/or technological analogies. Sediments that were sampled in East Cyprus (eastern Mesaoria Plain) for comparative purposes indicated that most of the investigated ceramics were produced from raw materials available around the ancient settlement of Enkomi. Appraising technological variations and discriminative raw-material characteristics, several pottery producing workshops in ancient Enkomi (Eastern Cypriot coast) have been identified that merchandised their commodities on Cyprus and, in all probability, also overseas.     

Evaluating inputs to models of hominin raw material selection: map resolution and path choices

Selection of an appropriate scale is an important decision in study design in many branches of science, since perceived patterns often change with the scales of spatial extent or resolution of an analysis. In previously published work, we created a resource selection model to determine the importance of several independent variables for the selection of lithic materials by hominins at a Middle Palaeolithic site in southern France. Two of these independent variables (calories exerted and difficulty of the terrain covered in travel from source to site) were calculated using elevation data extracted from maps. In the present paper, we examine the differences in model performance when the variables ‘Calories’ and ‘Difficulty’ are calculated using 1) three base maps for elevation that differed in map resolution (from finest to coarsest: a 1:25,000 topographic base map, SPOT DEM, and SRTM DEM), and 2) two different methods for determining the route from source to site (straight-line route and least-cost route; both methods exclude areas with slopes >60% from travel). Our best model was the one that used data calculated using the topographic base map; however, the SRTM DEM-based data produced models of essentially equal quality. Regardless of map scale, models that used data calculated using a straight-line route always outperformed models that used data calculated using a least-cost route. This supports our previous finding that a straight-line route is a more appropriate measure for the path from lithic source to site than a least-cost route. We conclude that the map resolution of each of the base maps used here is appropriate for analyses involving spatial data pertaining to Neandertal activity because this type of data is essentially always coarse-grained.     

Raw stone material supply for Upper Pleistocene settlements in Sierra de Atapuerca (Burgos,Spain): flint characterization using petrographic and geochemical techniques

Microscopy, mass spectrometry and X-ray diffraction methods were used to analyse 415 samples of natural and archaeological flint from Sierra de Atapuerca (Burgos, Spain) in order to define the different types from Neogene and Cretaceous formations in the study area, infer their genetic context and ascertain the supply sources used by hunter-gatherers who exploited this area in the Upper Pleistocene. A statistical classification model was also designed using linear discriminatory analysis and support vector machines which permitted the differentiation of the flint on an age basis.     

Long-term clay raw material selection and use in the region of Classical/Hellenistic to Early Byzantine Sagalassos (SW Turkey)

A provenance study was carried out on coarse ceramics from the Classical/Hellenistic to Mid-Byzantine city of Sagalassos, SW Turkey. The ceramics were sampled from the excavations of the city, and clay raw materials were sampled throughout its ancient territory. Used techniques were optical microscopy and electron microprobe analysis on thin sections, geochemical analysis (fusion ICP/MS and mineralogical analysis (X-ray diffraction). The geochemical/mineralogical diversity in the ceramics is not as wide as for the clay raw materials. It seems that even at the restricted scale of this study, the resources were limited to the area around the ancient site. The differences between the ceramics are likely due to the use of different ophiolitic clay bodies being exploited for their production.     

海岱地区新石器时代玉料来源及琢玉工艺初探

关于海岱地区新石器时代的玉器,此前已有学者从不同角度作过研究.但对于玉料来源及琢玉工艺从未做过专题分析.本文根据考古学以及矿物学的最新研究进展,从考古学文化的分区、文化因素分析、制作工艺等角度进行了尝试分析.     

Heat treatment in the South African Middle Stone Age: temperature induced transformations of silcrete and their technological implications

It was recently found that silcrete raw material was heat-treated during the South African Middle Stone Age (MSA) for altering its flaking properties. This finding led to hypotheses about the implications for the MSA hunter-gatherers such as the cost of thermal treatment in terms of investment and firewood. To date, these hypotheses lack a solid basis, for data on the thermal transformations of South African silcrete and, hence, the necessary heating procedure and heating environment, is missing. In order to produce such data, we conducted an experimental study within the framework of the Diepkloof project. This work is based on the petrographic, mineralogical and structural analysis of South African silcrete from the West Coast and its thermal transformations. Our results shed light on the nature of these transformations, the ideal heating temperatures and the tolerated heating speed. The processes occurring in silcrete are comparable to flint, i.e. the loss of chemically bound ‘water’ and the formation of new Si–O–Si bonds, but their intensity is less pronounced. Effective heating temperatures are significantly higher than for flint and the heating speed tolerated by South African silcrete is relatively fast. These findings imply that silcrete heat treatment cannot be directly compared with flint heat treatment. Unlike flint, heating silcrete does not require the setup of a dedicated heating environment and may have been performed in the same time as other fire related activities. This would represent only a minor supplementary investment in time and firewood. These results have broad implications for the discussion about technological evolution and the acquisition of specialised knowledge in the MSA.     

Upper Paleolithic raw material economies at Üçağızlı cave, Turkey

This paper addresses variation in lithic raw material economy within the early Upper Paleolithic at Üçağızlı cave (south-central Turkey). The stratigraphic sequence documents some 12,000 years of the early Upper Paleolithic, entailing changes in lithic technology, raw material exploitation, and game use. Although the same lithic raw materials were exploited throughout the sequence to make quite similar ranges of products, there are marked changes in the ways raw materials from different source areas were treated, including patterns of transport and raw material consumption. The concept of technological provisioning is used to understand changing strategies for procuring and managing supplies of flint from different source locations. Shifts in raw material economy are argued to represent responses to changes in residential mobility and the scale/duration of occupations at the cave itself: data on cultural features and foraging strategies provide independent evidence for these shifts in land use. Results have implications for more nuanced approaches to investigating of lithic raw material economies and the significance of “raw material transfers.”     

A method for estimating edge length from flake dimensions: use and implications for technological change in the southern African MSA

This paper presents a method for estimating edge length from flake dimensions. Comparison of estimated values with data from measured flake edges demonstrates the robusticity of the method. Building on the work of Braun (Braun, D.R., 2005. Examining flake production strategies: examples from the Middle Paleolithic of Southwest Asia. Lithic Technology 30, 107–125; Braun, D.R., Harris, J.W.K., 2003. Technological developments in the Oldowan of Koobi Fora: innovative techniques of artifact analysis and new interpretations of Oldowan behavior, in Mora, R., de la Torre, I. (Eds.), Oldowan: Rather More than Smashing Stones. Treballs d’ Arqueologia 9, pp. 132–144) this estimate is used to generate an edge length to mass value for complete flakes—taken to be a proxy for flaking efficiency. It is shown that this value is useful in tracking the onset, variability and decline of a well known technological phase—the Howiesons Poort of South Africa. The results suggest that the Howiesons Poort was a time in which flaking efficiency was emphasised. Furthermore, comparison of upper limits of edge to mass values for different raw materials may provide an insight into changes in raw material selection.     

Lake levels,mobility and lithic raw material selection and reduction strategies: A Great Lakes case study

Abstract

It has recently been proposed that lowered lake levels after 4250 BP broadened opportunities for mobility and interaction patterns among hunter-gatherer populations in the Saginaw drainage and in Michigan more broadly (; ). Here, data are presented on chipped stone reduction strategies as reflected in two site assemblages in Bay City, Michigan (20BY28, 20BY387) that bridge this key point in time. The earliest Late Archaic components of these sites, occupied during the higher than modern post Nipissing recession ca. 3200 BP, are typified by on-site reduction of local cherts, often utilising a bipolar reduction strategy. Subsequent uses of the area largely shifted to lower elevations. The more recent site components contain both more diverse projectile styles, many of which can be linked with Ontario types, and higher occurrences of non-local raw materials, specifically Onondaga chert apparently arriving at the site as preforms. The last use of these sites occurred during the Late Woodland, also during lower water levels approaching modern, and reflecting the highest use of Onondaga chert. We suggest that these changes resulted from shifting mobility and exchange patterns, facilitated in part by lowered post Nipissing water levels.     

Food waste and domestic refrigeration: a visceral and material approach

In this paper, we offer an embodied and material exploration of food waste arising from practices of food refrigeration and disposal. Inspired by geographers working with a visceral approach and calls within the discipline to evaluate the productive agency of materials, our framing brings materiality and embodiment to the fore in accounting for refrigerated food items recategorised and discarded as waste. Drawing on research conducted with 28 households in Wollongong (Australia), our analysis of refrigerating and ridding food orients around three emergent activities: placing, rotating, and assessing. Each section provides illustration of different ways in which affective social relations and subjectivities co-constitute embodied understandings and materialities of foods-becoming-waste. To conclude, we articulate the implications of a visceral and material approach for rethinking and addressing food waste.     

清时期辽宁、冀东地区聚落建筑材料与形式

本文主要通过对《燕行录》相关记载的分析,来探讨清时期辽宁、冀东地区的民居建筑材料与建筑形式。这一地区内部的各个区域之间,其民居的建筑材料与形式均有所不同;同时,城乡之间也存在着明显的差别。上述地域及城乡的差异,主要是由于自然环境、经济水平的不同造成的。