SCIENTIFIC INVESTIGATIONS OF ANTIQUE LACQUERS FROM A 17TH‐CENTURY JAPANESE ORNAMENTAL CABINET

A recent restoration of a 17th‐century Japanese lacquer cabinet revealed various later treatments over the original black coating to maintain and preserve the high gloss of the oriental cabinet over the course of time and to meet changing tastes. The comprehensive investigation on a series of coating samples was executed by means of two hyphenated techniques: gas chromatography – mass spectrometry (GC–MS) and pyrolysis combined with GC–MS (Py‐GC–MS). The results showed that the original lacquer is based on urushi and linseed oil, while the past interventions are composed of sandarac, shellac and dammar. Additional microscopic studies proved the multi‐layer structure of the lacquer and the use of different pigments.     

AN ARCHAEOMETALLURGICAL STUDY OF 13TH‐CENTURY ARROWHEADS AND BOLTS FROM THE CRUSADER CASTLE OF ARSUF/ARSUR

Selected iron arrowheads and bolts retrieved from the destruction layer of the Crusader castle of Arsur/Arsuf, which was taken down by the Mamluk army (headed by Baybars) in late April 1265, were studied. Being the only site within the boundaries of the Latin Kingdom of Jerusalem that has thus far yielded more than 1200 iron arrowheads, an archaeometallurgical characterization was performed. The aim of this research was to study the warfare methods and manufacturing technologies used by the Mamluk and Crusader armies. Examination included optical microscopy, SEM and SEM–EDS, XPS and microhardness tests. Analysis was performed on both the metallic iron and iron oxides. Ferrous wooden ‘fossils’, which were found on and within the bolts, were dendroarchaeologically tested. The microstructure analyses show that the weapons were made of wrought iron. These results are correlated with the function of the weapons. The different microstructures of the arrowheads and the bolts indicate dissimilar manufacturing processes. The graphitization of the ropes on the bolts and the oxide phases on their surfaces both provide evidence of high‐temperature fire. The ropes support the archaeological findings that these devices were used by the Mamluks to set the Crusader castle on fire.     

MATERIAL CHARACTERIZATION OF CERAMIC TILE MOSAIC FROM TWO 17TH‐CENTURY ISLAMIC MONUMENTS IN NORTHERN INDIA

Coloured tiles from two northern Indian monuments were analysed for their body and glaze composition. The results suggest that three different groups of tiles were used, all comprising a stonepaste body with alkali glaze. One group has strong similarities to a major Indian glass group, known as high alumina mineral natron glass, while the other two are similar to Western and Central Asian plant ash glazes, although with much lower lime content. The colorants conform with those usually employed in pre‐modern glazes, with lead‐tin yellow Type I and Type II for opaque yellow, copper blue‐turquoise, cobalt blue, manganese purple, and green through mixing of lead‐tin yellow and copper blue.     

CHARACTERIZATION OF 18TH‐CENTURY MEISSEN PORCELAIN USING SEM–EDS*

Analytical investigations of fragmented Meissen porcelains well dated to between 1725 and 1763 have been carried out using SEM–EDS. The aim of the analysis was to characterize elements in bodies, glazes and overglaze enamels in order to create a baseline data set of materials used in the manufacture of porcelain at the Meissen factory, Saxony, during the 18th century. Analyses indicate body and glaze compositions to be consistent with a post c.1720–30 date, when a change from a lime‐rich flux to a potassium‐rich flux is documented to have occurred. Overglaze enamel compositions are shown to be consistent with contemporary accounts of enamel preparations at Meissen. Overglaze enamel compositions show that mixtures of pigments, in addition to documented enamel 18th‐century preparations, were in use at Meissen between c. 1725 and 1763.     

INCISED SLIPWARE PRODUCTION AT CASTELFIORENTINO (FLORENCE): THE ‘VIA BERTINI’ SITE (15TH–17TH CENTURIES)*

This study deals with the physical–chemical and mineralogical–petrographic investigations (OM, SEM–EDS, EPMA, ICP, XRpD, Mössbauer and IR) conducted on first‐ and second‐firing wasters belonging to two types of incised slipware (sgraffito), manufactured at Castelfiorentino between the late 15th and the early 17th centuries. Raw materials, colouring agents and firing products were analysed in order to establish the production technology of the ceramic coatings, by means of detailed microtextural and chemical investigations. The pottery underwent two firing processes: the firing of the white slip‐coated ceramic body and a further firing after application of the glaze. The homogeneity of the raw materials, white slip and glaze is remarkable, and demonstrates the use of well‐established recipes with a constant supply of raw materials from the same places. Highly efficient kiln management during both firings is revealed by body–glaze interface reactions.     

A SCIENTIFIC INVESTIGATION ON THE PROVENANCE AND TECHNOLOGY OF A BLACK‐FIGURE AMPHORA ATTRIBUTED TO THE PRIAM GROUP*

The restoration of a Greek black‐figure amphora provided an opportunity to study the provenance and production technology of the vase. The composition of the ceramic body, determined by inductively coupled plasma optical emission spectroscopy (ICP–OES), matches that of Attic products. Investigation by X‐ray diffraction and reflectance spectroscopy suggests a maximum firing temperature around 900°C and a body re‐oxidation temperature around 800°C, respectively. The morphology and composition of black, red and dark red surface areas were studied by scanning electron microscopy and X‐ray energy‐dispersive analysis; the black areas show the features of a typical well‐vitrified black gloss, while the red areas were most probably obtained by simple burnishing of the body; the dark red additions, on the other hand, are the likely result of a partial re‐oxidation of a clay–ochre mixture.     

A STUDY OF THE SILVERING PROCESS OF THE GALLO‐ROMAN COINS FORGED DURING THE THIRD CENTURY AD*

We have observed by fast neutron activation analysis (FNAA) that the global composition of the official silver coins of the Gallic emperor Postumus is not the same as those from the contemporary unofficial mints. In order to explain this phenomenon, we have carried out a metallographic study of the artefacts. Then, we have re‐created the silvering process of unofficial coins in order to better understand the manufacturing process of silvering. The different steps of the replication process are explained in this paper.     

BUILDING AN IDENTITY: ARISTOCRATIC LANDSCAPE AND CONSPICUOUS CONSUMPTION AT THE 16TH‐CENTURY BISHOP'S PALACE IN ODENSE

In the 16^th century, establishing and maintaining one's status and position in society was an important social factor and motivator. This article examines to what extent such efforts can be deduced from archaeological material. The subject is the 16^th‐century bishop's palace in Odense, Denmark. This case study has been encouraged by the unprecedented large‐scale archaeological excavations that have taken place in the Odense city centre in recent years. The new archaeological data allows for a contextual analysis in which the finds and structures are considered as evidence for negotiated identity expressed through materiality. The main conclusion is that a unique socioeconomic identity is expressed in the building structure, while evidence from the portable objects is more ambiguous.     

A WOMAN'S PLACE: SPACE,MEETING PLACES AND GENDER IN 16TH‐CENTURY NYA LÖDÖSE,SWEDEN

In this article, archaeological and archival data are used to discuss gender in 16^th‐century Nya Lödöse in western Sweeden with a focus on women. Four areas for social space are identified and analysed. The result shows that women seem to have had a somewhat higher degree of agency in Nya Lödöse compared with the surrounding countryside and smaller towns.     

A MULTIDISCIPLINARY APPROACH TO THE CHARACTERIZATION OF ROMAN GRAVESTONES FROM AQUILEIA (UDINE,ITALY)*

The results of an archaeometric study on gravestone production in Aquileia (northeastern Italy) during Roman Republican times are reported here. The artefacts are made of limestone, quarried from the sedimentary sequence of the Trieste Karst (Carnican Alps, northeastern Italy), as testified by historical sources which refer to the ‘Roman Quarry’ at Aurisina. The rock types used for the gravestones are petrographically, geochemically and geochronologically homogeneous, and display similar faunal assemblages. In addition, their age is restricted to the Santonian – Lower Campanian. Comparisons between archaeological finds and rock specimens from various active and inactive quarries in this area suggest that quarrying during Roman Republican times was limited to a specific stratigraphic horizon of the sedimentary sequence, corresponding to the higher part of the ‘Roman Quarry’.     

GLAZED CERAMIC MANUFACTURING IN SOUTHERN TUSCANY (ITALY): EVIDENCE OF TECHNOLOGICAL CONTINUITY THROUGHOUT THE MEDIEVAL PERIOD (10TH–14TH CENTURIES)*

Archaeometric investigation allowed the characterization of two important classes of ceramics: ‘vetrina sparsa’ and ‘invetriata grezza’. Their archaeological peculiarity makes them particularly suited for tracing the evolution of glaze manufacturing in southern Tuscany throughout the medieval period (10th–14th centuries). These ceramics were found in different sites of historical importance, and also from a mining perspective. Local copper, lead, zinc and iron mineralizations supported the growth of several settlements in the vicinity of the mines. The many castles and different archaeological finds (ceramics, glazed ceramic, slag etc.) attest to the intense mineral exploitation of the area from at least the first millennium bc up to the modern period. In light of these geological and archaeological characteristics, archaeometric investigation was intended to provide insight into ancient technical knowledge of ceramic glazing and to determine the source area for raw materials in the medieval period (10th–14th centuries). Ceramic bodies were analysed through OM, XRDp, SEM–EDS and XRF, while coatings were investigated through SEM–EDS. Mineralogical, petrographic and chemical analyses revealed slightly different preparation and firing processes for the two classes of ceramics. These data suggest the continuity through the centuries of the ‘vetrina sparsa’ and ‘invetriata grezza’ production technology. The mineralogical phases, such as monazite, xenotime, zircon, barite, Ti oxide, ilmenite, titanite, tourmaline and ilvaite, and the lithic (intrusive and volcanic) fragments detected within the ceramic bodies suggest a source area in the vicinity of the Campiglia mining district. Lastly, the presence of Cu–Zn–Pb (Ag) and Fe sulphide mineralizations (materials used to produce glaze) in the area supports the hypothesis of local manufacture.     

THE STREETS AS A MEETING PLACE FOR DIFFERENT ACTORS AND AGENDAS: BUILDING AND USE OF OPEN SPACE IN 16TH‐CENTURY NYA LÖDÖSE,SWEDEN

The town of Nya Lödöse, close to present‐day Gothenburg, Sweden, existed from in 1473‐1624. The material from the extensive archaeological excavations 2013–2017 presents the opportunity to study construction, use, and change of the streets. There seems to have been a clear hierarchy of streets, ranging from main streets to local streets and private alleys. This variety of streets covered different needs in the town's infrastructure. They were also the meeting point for different public and private actors with shifting objectives. Over time the authorities gained increased control over the streets, apparent in the material from the 1580s and onwards. This can be seen as a part of a Scandinavian trend linked to the emergence of the early modern state.     

THE ANALYSIS OF DYESTUFFS FROM FIRST‐ TO SECOND‐CENTURY TEXTILE ARTEFACTS FOUND IN THE MARTRES‐DE‐VEYRE (FRANCE) EXCAVATIONS*

A series of Gallo‐Roman clothes and miscellaneous textile fragments from the first and second centuries from the Martres‐de‐Veyre necropolis (Puy‐de‐Dôme, France) was investigated. The objects studied were excavated between 1851 and 1923, during successive rounds of archaeological work. Since that time, they have been conserved in the Barguin Museum at Clermont‐Ferrand. The target of our research was dye identification, as it gives very interesting and useful information regarding the ancient technology. This approach has until now not been considered to be relevant and, unfortunately, is not systematic. The analysis was carried out by high‐performance liquid chromatography with photodiode array detection (HPLC–PDA). The small samples (threads up to 0.6 mg, less than 1 cm long) of coloured textile fibres were submitted to this technique. In one case, X‐ray fluorescence (XRF) analysis was applied. According to the analysis, the dyeing sources proposed are the Rubiaceae family for red, a luteolin ‘base’ for yellow, ellagitannins for brown and indigo for blue colours. Several samples did not seem to contain any dye. We point out possible factors for the partial dye source determination: instrumental limits, sample size, low dyestuff content in analysed samples and the dyes’ decomposition during ageing. Some improvements of dye analysis in archaeological samples by separation techniques based on recent analytical instrumentation and combined approaches are proposed.     

居民家庭旅游消费行为初探

居民家庭旅游行为是一种特殊的消费行为,本文根据长春市居民家庭消费行为的有关调查资料对影响长春市居民家庭旅游消费行为的因素进行了分析探讨,并说明了居民家庭旅游消费行为研究的重大意义。     

NON‐DESTRUCTIVE CHEMICAL ANALYSIS OF OLD SOUTH ARABIAN COINS,FOURTH CENTURY BCE TO THIRD CENTURY CE

Studies on Old South Arabian (OSA) coinage are rare and state‐of‐the‐art materials analysis for them lags far behind that of ancient Greece and Rome. Understandably, numismatists responsible for preserving their collections discourage destructive analyses. We have selected coins of the aesthetically and technically developed Himyarite Royal Raydan series (early first to late second century ce ), so‐called Old and New Style Athenian Imitations, among others to provide a wide spectrum of information on OSA coinage. We used non‐destructive neutron diffraction to ascertain the metal compositions and corrosion products. Density determinations using gas‐pycnometry support these experiments. The results provide detailed information with regard to a small, apparently homogeneous, selection of 10 Himyarite period specimens and first insights into the actual and the original metal compositions of about 90 coins of the three main OSA numismatic groups. The analytical results make clear which OSA coins originally were struck and which ones were cast. The analyses provide not only detailed information concerning the manufacture of the selected representative coins, but also suffice to cast a shadow on the reliability of commonplace macro‐optical classification, which proves often to be inaccurate.     

AN ARCHAEOMETRIC STUDY OF MEDIEVAL GLASS FROM THE FIRST BULGARIAN CAPITAL,PLISKA (NINTH TO TENTH CENTURY AD)

Glass finds from the first Bulgarian capital, Pliska, have been analysed by instrumental neutron activation analysis. The analytical data, together with previous results from analysis of glass samples from the second Bulgarian capital, Preslav, were subjected to cluster and discriminant analysis. The local origin of part of the analysed samples was proven and some conclusions about the technology of production were possible.     

ANTIMONATE OPAQUE GLAZE COLOURS FROM THE FAIENCE MANUFACTURE OF LE BOIS D’ÉPENSE (19TH CENTURY,NORTHEASTERN FRANCE)*

Three types of antimony‐based, opaque ceramic colours were used in the faience workshop of Le Bois d’Épense during the first decades of the 19th century; that is, yellow, tawny and green. Yellow is generated by lead antimonate crystals (Naples Yellow), which are incorporated into an uncoloured glass matrix. According to SEM–EDS measurements, these pigments contain iron. The tawny colour is the optical result of the combined presence of similar yellow, iron‐bearing lead antimonate particles in a Fe‐rich, brownish glass matrix. The green opaque colour is produced by the combination of a blue cobalt glass and yellow Pb–Sn–Fe‐antimonate crystals. Cores of zoned pigments lighten the recipes, according to which the pigments were produced. First, they were synthesized by calcination, ground and then mixed with a colourless, brown or blue glass powder. The resulting powder mixture was added to a liquid agent and used as high‐temperature ceramic colour.     

PROVENANCE STUDY OF MARBLE ARTEFACTS FROM THE ROMAN BURIAL AREA OF FASCHENDORF (CARINTHIA,AUSTRIA)*

Numerous marble artefacts were among the extraordinary findings excavated at the Roman burial area of Faschendorf (Carinthia, Austria). The provenance of marble objects, particularly in the Roman provinces, is mostly unclear. Predominantly Mediterranean marbles have been used, but there are also some marble occurrences in the eastern Alpine regions that were exploited in those times. Besides a mineralogical–petrographic analysis, grain‐size evaluation in particular, and the determination of carbon and oxygen isotopes allow an effective characterization of the Faschendorf materials. Their provenance from the Gummern Marble complex in Carinthia is very likely.     

湖泊流域社会生态系统脆弱性时空演变及调控研究——以滇池为例

脆弱性研究领域不断从自然生态系统向社会自然复合系统扩展,从社会生态系统视角动态化和人文化地研究脆弱性已成为趋势。湖泊流域是多层级的复合的社会生态系统,从流域角度、社会生态系统层面、体制机制维度,综合分析社会生态系统脆弱性的驱动机制,对系统治理和源头治理湖泊流域具有重大意义。文章以滇池为例,将"压力-状态-响应"模型和"暴露度-敏感性-恢复力"模型结合,构建脆弱性分析框架和评价模型,探寻湖泊流域社会生态系统脆弱性时空演变规律和脆弱性驱动机制,提出了湖泊流域脆弱性调控和区域可持续发展的思路。