CYPRIOT BYZANTINE GLAZED POTTERY: A STUDY OF THE PAPHOS WORKSHOPS

Twenty‐five samples of Byzantine glazed pottery from two archaeological sites between Limassol and Paphos region (Cyprus), dated between the 12th and 15th century ad were studied using micro X‐ray fluorescence spectroscopy, scanning electron microscopy and X‐ray diffraction analysis. It was found that all the glazes contain lead, following the main manufacturing process of medieval pottery in the Mediterranean territory, while some of them contain tin, possibly for better opacity. Furthermore, it is shown that copper, iron and cobalt with nickel are responsible for the decoration colours. Finally, the application of principal component analysis revealed significant differentiation for some of the samples.     

The production and technology of glazed ceramics from the middle ages,found in the saepinum territory (Italy): a multimethodic approach*

A collection of ceramics from the Middle Ages found in Altilia and Terravecchia (the Saepinum area, Campobasso, Italy) were characterized by using different mineralogical analyses to investigate their provenance and production techniques. The body ceramic was investigated using Rietveld phase analysis of X‐ray powder diffraction patterns, X‐ray fluorescence spectrometry and scanning electron microscopy. The chemical compositions of the coatings were measured by scanning electron microscopy and their mineralogical compositions were determined using a particular technique of X‐ray small‐angle scattering (SAS) optimized for studies of thin films. Moreover, the material used for decoration was studied using micro‐Raman spectroscopy. The archaeometric results confirmed the distinction into two different ceramic classes, already individuated from archaeological analysis: the Altilia objects belong to the protomajolica class, whereas the objects from Terravecchia are RMR (ramina‐manganese‐red) ceramics. A comparison between the chemical and mineralogical compositions of good‐quality ceramic objects and those of waste products indicated local production of the ceramics. A sharp distinction was found in the chemical composition of the coatings: the Altilia products have tin‐opacified lead glazes, while the Terravecchia ones have transparent high‐lead glazes. Among the Altilia products, the unsuccessful process that produced a large quantity of discarded materials was attributed to the high lead content of the glazes. In fact, the principal advantage of the high lead content was to make the preparation and application of the glaze suspension easier, but the risk of reduction of lead oxide to metallic lead was greatly increased. Using micro‐Raman spectroscopy, the following minerals were identified as pigments: pyrolusite for the dark colour, malachite for green, lepidocrocite for yellow and hematite for red.     

A STUDY OF GLASS TESSERAE FROM MOSAICS IN THE MONASTERIES OF DAPHNI AND HOSIOS LOUKAS (GREECE)

In this work 51 glass mosaic tesserae from decorations of the two Greek monasteries of Daphni and Hosios Loukas were analysed by inductively coupled plasma optical emission spectroscopy, electron microprobe analysis and X‐ray powder diffraction. On the basis of the chemical analyses, after discrimination between the tesserae of the original decorations and those from other periods, it was possible to outline the distinctive traits of Byzantine mosaic tesserae. In both the monasteries, the original mosaics were decorated with tesserae produced with plant ash based glass, either of the typical composition or a mixture with natron type glass. The samples from the Hosios Loukas decorations show a more homogeneous composition compared with those from Daphni. The major differences among the original samples are due to the presence of opacifiers and colourants.     

Technology Transfer at the Periphery of the Mycenaean World: The Cases of Mycenaean Pottery Found in Central Macedonia (Greece) and the Plain of Sybaris (Italy)*

The study of technology transfer in pottery production to the periphery of the Mycenaean world has been addressed by considering two different areas, southern Italy and central Macedonia. Technological features such as ceramic paste, decoration and firing have been determined for different ceramic groups established according to provenance criteria. The studies of technology and provenance have been performed following an archaeometric approach, using neutron activation analysis, petrographic analysis, X‐ray diffraction and scanning electron microscopy. The results have revealed the existence of two different models. On the one hand, southern Italy seems to exhibit a more organized pottery production, which follows a Mycenaean‐like technology, while in central Macedonia production is probably more varied, being based in part on the technology of the local tradition.     

A SCIENTIFIC INVESTIGATION ON THE PROVENANCE AND TECHNOLOGY OF A BLACK‐FIGURE AMPHORA ATTRIBUTED TO THE PRIAM GROUP*

The restoration of a Greek black‐figure amphora provided an opportunity to study the provenance and production technology of the vase. The composition of the ceramic body, determined by inductively coupled plasma optical emission spectroscopy (ICP–OES), matches that of Attic products. Investigation by X‐ray diffraction and reflectance spectroscopy suggests a maximum firing temperature around 900°C and a body re‐oxidation temperature around 800°C, respectively. The morphology and composition of black, red and dark red surface areas were studied by scanning electron microscopy and X‐ray energy‐dispersive analysis; the black areas show the features of a typical well‐vitrified black gloss, while the red areas were most probably obtained by simple burnishing of the body; the dark red additions, on the other hand, are the likely result of a partial re‐oxidation of a clay–ochre mixture.     

Chemical characterization of ancient pottery from sudan by x‐ray fluorescence spectrometry (xrf), electron microprobe analyses (empa) and inductively coupled plasma mass spectrometry (ICP–MS)*

Sixty‐four sherds and seven natural clays from prehistoric sites in northwestern Sudan have been submitted to petrological and chemical analysis using XRF spectrometry, EMPA and ICP–MS. According to their texture, the sherds form five different groups. The high contents of P₂O₅ (more than 0.5 wt%) discerned in 19 samples and the variation of the P₂O₅ content in two samples of the same vessel can be explained by post‐depositional processes or by the ancient organic contents (e.g., milk) of the vessel. Chemical classification of the pottery bulk suggests that vessels were made locally, as only sherds from the same area show homogeneity of data.     

A Quasi Non‐destructive Microsampling Technique for the Analysis of Intact Glass Objects By Sem/edxa

A novel sampling technique for the analysis of glass is described, which involves the removal of minute particles from an object with a diamond‐coated file, followed by energy‐dispersive X‐ray analysis in the scanning electron microscope (SEM/EDXA). The particles are fixed to adhesive carbon discs and carbon coated without grinding or polishing. Mean compositions are determined for 10 arbitrarily selected particles above a minimum grain size of 150 mm and normalized to totals of 100%. Tests were carried out on two standard soda–lime–silica glasses of well‐characterized composition, using two files of different grade. The analyses showed good agreement with the accepted values of all elements. Although the precision is somewhat reduced, this highly portable and quasi non‐destructive microsampling procedure provides almost the same information as that gained from samples embedded and polished in the normal way. Its application is thought to be especially useful for the investigation of intact glass objects and ceramic glazes.     

The Mineralogical Characteristics of the Lamboglia 2 Roman‐Age Amphorae from the Central Adriatic (Croatia)*

The mineralogical characteristics of four Lamboglia 2 Roman‐age amphorae excavated from ancient underwater shipwreck localities in the central Adriatic were investigated. X‐ray diffraction and optical microscopy analyses showed that the amphorae have similar primary mineral compositions, mainly consisting of quartz, plagioclase, potassium feldspar, diopside, illite and calcite, most probably originating from clayey Eocene flysch deposits used as raw materials in manufacture. The difference in mineral composition between these samples is recognized from the presence or absence of melilite, high‐magnesium calcite, aragonite, gypsum and analcime. It was shown that melilite is a secondary mineral formed during the firing process, while the others, which build up through incrustation of marine benthonic communities on the amphora walls and fill the cracks in the amphora bodies, were formed by crystallization in seawater. The firing of the original pieces of amphorae showed that melilite could be formed at temperatures higher than 800°C, most probably through interaction between calcite and silicate minerals present in the raw materials. The presence of melilite, and the absence of illite and calcite, were used to estimate the firing temperature of the amphorae during their production.     

CHARACTERIZATION OF RED‐COLOURED SLIPS (ALMAGRA) ON ISLAMIC CERAMICS IN MUSLIM SPAIN*

Small objects found in Islamic (eleventh‐century) kilns excavated in Zaragoza (Spain) were studied to determine the nature of the red coating of almagra pottery. Ceramics with almagra decoration were completely coated with a glossy deep‐red layer, a slip, applied to the body before firing. Chemical and mineralogical studies were carried out, together with analysis of a surface treatment with organic compounds. The results of this study confirm that almagra ceramics were produced by means of a specific and elaborate process (slip preparation, firing and wax application), demonstrating the introduction of this slip into local production during the Islamic period.     

ALTERATION PROCESSES OF POTTERY IN LAGOON‐LIKE ENVIRONMENTS

Post‐depositional processes in pottery can give rise to chemical and mineralogical alterations, the extent of which is closely related not only to the microstructure and composition of the potsherds, but also to the chemical–physical conditions of the burial environment. The present paper describes the characterization of post‐depositional alterations and identification of processes involving pottery buried in lagoon‐like environments. A set of various types of Roman transport amphorae and African Red Slip ware (ARS), collected from two archaeological sites characterized by a lagoon‐like depositional environment and showing evident changes in the original colours, was analysed by a combination of microstructural, mineralogical and microchemical approaches. The formation of pyrite after hematite, jarosite after pyrite and microstructural substitution features are interpreted here in terms of the chemico‐physical conditions of the burial environment and their evolution in time.     

ARCHAEOMETRIC INVESTIGATIONS OF SGRAFFITO CERAMIC TILES (FIFTEENTH‐SIXTEENTH CENTURIES) RECOVERED FROM EXCAVATIONS IN UDINE (NORTH‐EAST ITALY)*

Most of the Renaissance sgraffito tiles excavated in Udine (Italy) constitute a homogeous group, the tile body having a CaO/MgO molar ratio ?= 3:2. They were produced using a dolomite‐ and calcite‐containing clay fired at 900–950°C. A small group of samples, with a lower firing temperature and a CaO/MgO ratio ?= 2:3, was probably produced in a different factory. Slip and transparent glaze, characterized by optical microscopy and inductively coupled plasma atomic emission spectrometry, are an illite‐rich clay and a lead silicate, respectively.     

ARTIFICIAL OR NATURAL ORIGIN OF HEMATITE‐BASED RED PIGMENTS IN ARCHAEOLOGICAL CONTEXTS: THE CASE OF RIPARO DALMERI (TRENTO,ITALY)

This study concerns those crystallographic and microstructural features that can provide indications on the actual origin of red pigments based on hematite (Fe₂O₃). The main features of natural and artificial hematite are recalled and used to discuss the results obtained from the characterization of red‐ochre samples coming from the Palaeolithic site of Riparo Dalmeri, a rock‐shelter located in northeastern Italy, dated to 13 000 cal. bp , and notorious for the presence, among the other finds, of red‐painted calcareous stones. Painting and the treatment of leather and hides obtained from the intensive hunting activity were the main uses of the hematite‐based red‐ochres at Riparo Dalmeri. It turns out that hematite was mostly obtained from the thermal treatment of goethite, which, unlike hematite, was and still is widely available in the neighbourhood of the site.     

Estimation of the Production Parameters of Very Large Medieval Bricks from St. Urban,Switzerland

The aim of the present study is to determine the production technology of a particular type of large medieval brick. The firing temperature and their soak times are estimated using a combination of colour and fabric, as well as mineralogical, microstructural and open porosity analysis. A replication experiment was carried out in order to validate the estimated predictions, and to give a realistic idea of the time needed to dry and fire each large brick. The experiment also suggests the temperature distribution and firing atmosphere in the kiln, as well as providing an estimate of fuel consumption. Analytical results and replication both provide information to assess the production technology, the time parameters and the firing temperatures involved in the production of the medieval bricks of St. Urban.     

THE SECTILIA PANELS OF FARAGOLA (ASCOLI SATRIANO,SOUTHERN ITALY): A MULTI‐ANALYTICAL STUDY OF THE RED,ORANGE AND YELLOW GLASS SLABS*

SEM–EDS, EMPA, ICP–MS and ICP–OES were applied to the study of three sectilia panels made of red, orange and yellow glass slabs. In order to determine the chemical state of Cu, XAS was also performed. The results indicate that, with the exception of the red samples, all slabs were made by mixing a siliceous sand with natron. The red slabs show significant compositional differences with respect to K₂O and MgO contents, probably linked to the use of plant ashes as a source of alkali. The red, orange and yellow slabs are coloured by metallic copper, cuprite and Pb antimonates, respectively. The comparison between the chemical composition of the Faragola samples and several glass reference groups did not provide conclusive evidence of provenance.     

A TECHNOLOGICAL EXAMINATION OF NINTH–TENTH CENTURY AD ABBASID BLUE‐AND‐WHITE WARE FROM IRAQ,AND ITS COMPARISON WITH EIGHTH CENTURY AD CHINESE BLUE‐AND‐WHITE SANCAI WARE*

Eight sherds of ninth–tenth century ad Abbaesid blue‐and‐white glazed earthenware, excavated in 1931 at Hira in western Iraq, were analysed using, variously, quantitative wavelength‐dispersive spectrometry (WDS) and energy‐dispersive spectrometry (EDS) in association with scanning electron microscopes (SEM), and semi‐quantitative X‐ray fluorescence spectrometry (XRF). In order to compare the compositions of the cobalt pigments used, the glazes of seven complete vessels of eighth century ad Chinese Tang blue‐and‐white sancai were also analysed semi‐quantitatively using XRF. The Abbasid wares were shown to have used traditional Mesopotamian alkali–lime glazes applied to calcareous clay bodies. Half the glazes examined were opacified with tin oxide. Three types of blue decoration (i.e., raised; spreading; and flat, non‐spreading) were produced using a variety of formulations, including a mixture of cobalt pigment with lead oxide. The sources of the ores used for the cobalt pigments have not been identified. However, the analytical data showed that the cobalt ore used for the Abbasid blue‐and‐white ware could be distinguished from that used for the Tang blue‐and‐white sancai by its higher iron content and by the presence of a significant amount of zinc. The use of cobalt‐blue decoration on the ninth–tenth century ad Abbasid ware was anticipated in China by eighth century ad Tang blue‐and‐white sancai wares. However, whether its introduction by the Abbasid potters should be seen as an independent invention that followed the introduction of tin‐opacified glazes in Iraq, or whether it was influenced in some way by Chinese originals, is still unresolved.     

CLAY RESOURCES AND TECHNICAL CHOICES FOR NEOLITHIC POTTERY (CHALAIN,JURA, FRANCE): CHEMICAL,MINERALOGICAL AND GRAIN‐SIZE ANALYSES*

Many authors have considered pottery manufacturing constraints and sociocultural elements as factors in change in past civilizations over time. The main issue of this research is to better understand the reasons for changes, or choices, in pottery raw materials. The very precise and detailed stratigraphy and cultural succession of occupations is based on dendrochronological data from the lake‐dwelling sites of Chalain (Jura, France). Petrographic, palaeontological and chemical analyses were used to determine the nature and origins of the raw materials used by the Neolithic potters. Stratigraphy and dendrochronological data were used to reconstruct in detail the evolution dynamics of fabric changes. Several raw material sources were identified for many of the pottery groups. Each of them was sampled for qualitative experimental tests of pottery forming. The experimental results show a high variability between the sediments tested. This variability was quantitatively estimated by XRF, XRD, the Rietveld method, calcium carbonate quantification and laser grain‐size analyses of matrices, indirect measures of plasticity. These analytical results allow a better understanding of the differences observed in the experimental tests. On the basis of these experimental and analytical results, changing parameters such as pottery manufacturing constraints, mineralogical characteristics of raw materials and sociocultural factors are considered. In conclusion, all the social and technical parameters, in each archaeological context, must be taken into account for a better understanding of the changes occurring throughout the chronological sequence.     

Anthropological and physicochemical investigation of the burnt remains of Tomb IX in the ‘Sa Figu’ hypogeal necropolis (Sassari,Italy) – Early Bronze Age

Excavations carried out in Tomb IX of the hypogeic necropolis of ‘Sa Figu’, near the village of Ittiri (Sassari, Italy), supplied burnt human bone remains and pottery unambiguously referred to the Early Bronze Age (characterised by the local culture of ‘Bonnannaro’). Besides the anthropological study, we have investigated and evaluated the possibility of a funerary cremation practice in Sardinian pre‐history, a subject that has previously not been considered from a scientific point of view. Making use of a calibration procedure based on X‐ray diffraction (XRD) line‐broadening analysis, related to the microstructural properties, it was possible to estimate the combustion temperature to which the fragmented bones were subjected. It was found that the studied bones reached temperatures varying from 400°C up to a maximum of 850°C. This spread of values suggested inhomogeneous combustion of the bones, which seems compatible with funerary cremation practices. Copyright © 2007 John Wiley & Sons, Ltd.     

Technological Choices in Hand‐Made Indigenous Pottery from Western Mallorca (Balearic Islands,Spain) (C.1200–75 bc): An Archaeometric Approach

This paper addresses the technological choices observed in Mallorca (Spain) for the production of hand‐made pottery during the Late Bronze and Iron Age. We have conducted a diachronic analysis of the ceramic assemblages recovered from two archaeological sites placed in the same territory by means of X‐ray fluorescence and optical microscopy by thin‐section analysis. The archaeometric characterization of the hand‐made vessels allows us to establish several compositional groups related to the use of different raw materials and certain paste recipes associated with the archaeological sites and periods considered. Thus, this study evidences different productive strategies in each site and across time in the same geographical area.     

Independence and Corporations in Pre‐Reform Freeman Boroughs: A Case Study – Newcastle‐under‐Lyme in the 1810s

This article draws on a wide range of evidence – corporation records, pollbooks, newspapers, squibs and broadsides, and private correspondence and accounts – to put forward some significant revisions to the electoral history of the borough of Newcastle‐under‐Lyme in the early 19th century. In the process, the article contributes to our understanding of the conflict between ‘oligarchy’ and ‘independence’ which characterised politics in this and other freeman boroughs. The independent party in the town emerges as a powerful force in its own right, one which came to monopolise access to the ‘rhetoric of independence’, rather than being a mere vehicle for ambitious candidates. The ability of the corporation to influence events by manipulation of the voting roll is also reassessed, and is seen to have been less significant than has been supposed.     

A Second Investigation into the Chemical Composition of the Roman Provincial (Procuratorial) Coinage of Judaea,AD 6–66*

An investigation of the chemical composition of the first Roman provincial coinage of Judaea, minted in ad 6–66, was conducted. A total of 103 copper‐alloy coins were analysed by ICP‐AES. It was determined that different copper alloys were used for the coinage, a leaded tin‐bronze and a pure tin‐bronze alloy. The investigation also showed that the copper alloy was made in four different formulae with regard to the alloying elements added to copper. Trace element profiles point to the existence of a shared pool of metal for Roman coins and metalwork.