Later Stone Age shellfishing behaviour at Dunefield Midden (Western Cape,South Africa)

Later Stone Age shellfishing behaviour was analysed within a unique archaeological context using computer aided spatial analysis techniques. The young age, the short occupation and large excavated area of the site ‘Dunefield Midden’ (Western Cape, South Africa) made it an ideal candidate for the investigation of patterns within shellfish distributions. A model describing the factors involved in causing shellfish patterning on archaeological sites was developed and used as a guide for the interpretation of the analyses. Human behaviour was successfully identified to have produced patterns in the shellfish distributions providing a new understanding of the practices of the prehistoric inhabitants. All results were summarized in a model of shellfishing behaviour at ‘Dunefield Midden’.     

The archaeology and paleoenvironment of an Upper Pleistocene hyena den: An integrated approach

Data of high resolution for reconstructions of archaeological site formation processes can be obtained only by the use of precise excavation methods and comprehensive recovery techniques using fine-mesh water screening, followed by meticulous sorting and quantitative studies of all the small organic components from the screens. These methods are generally used at human occupation sites, but are not often employed at paleontological or mixed human-carnivore sites. At the site of Bois Roche, an Upper Pleistocene hyena den, we have used these meticulous recovery techniques in combination with absolute dating, geoarchaeological observations, taphonomic analyses, studies of microvertebrates and pollen analysis. Correlation of the site environmental data from pollen and microvertebrate assemblages with the vegetation record of a deep-sea core taken in the Bay of Biscay have allowed us to constrain the ages provided by ESR dating of bovid teeth and to reconstruct the physical environment of the site with a degree of confidence rarely achieved by the use of fossil remains from archaeological sites alone.     

Electric and magnetic tomographic approach for the geophysical investigation of an unexplored area in the archaeological site of Pompeii (Southern Italy)

The joint application of electric and magnetic techniques for near-surface exploration represents a very useful tool for archaeological investigation and can provide a quantitative contribution to describe the spatial distribution of buried objects. In this work we show a new advanced tomographic approach, based on the parallel inversion of magnetic and electric observed data, aimed at the reconstruction of the subsoil of a still unexplored area of the archaeological site of Pompeii (Southern Italy). The survey was performed in collaboration with Pompeii's Archaeological Commission. The comparison between the results obtained from the tomographic inversions of both electrical and magnetic data was carried out in terms of the data inversions, which allowed us to obtain information about the location of the buried geophysical sources in the investigated subsoil. The results obtained seem to be in a good agreement, both for the position of the geophysical sources and for their dimensions.     

Immersive Visualization and Curation of Archaeological Heritage Data: Çatalhöyük and the Dig@IT App

Advanced data capture techniques, cost-effective data processing, and visualization technologies provide viable solutions for the documentation of archaeological heritage and material culture. Work at the UNESCO World Heritage site of Çatalhöyük has demonstrated that new digital approaches for capturing, processing, analyzing, and curating stratigraphic data in 3D are now feasible. Real-time visualization engines allow us to simulate the stratigraphy of a site, the three-dimensional surfaces of ancient buildings, as well as the ever-changing morphology of cultural landscapes. Nonetheless, more work needs to be done to address methodological questions such as follows: can three-dimensional models and stratigraphic relationships, based on 3D surfaces and volumes, be used to perform archaeological interpretation? How can a 3D virtual scenario become the interface to cultural data and metadata stored in external online databases? How can we foster a sense of presence and user embodiment in the simulation of ancient cities and archaeological sites? This article aims to provide viable solutions to the methodological challenge of designing a comprehensive digital archaeological workflow from the data acquisition and interpretation in the field to a three-dimensional digital data curation based on interactive visualization, searchable 3D data, and virtual environments. This work describes the results we achieved developing the application Dig@IT, a multi-platform, scalable virtual reality tool able to foster archaeological data analysis, interpretation, and curation in a realistic and highly interactive virtual environment.     

Microartefacts' weight estimation by Genetic Algorithm minimization

The information potential of microartefacts can assist in archaeological interpretation. In this paper, a method for estimating the weight of microartefacts is presented. This method is based on Genetic Algorithms, a stochastic minimisation method that comes from Computational Intelligence techniques. It was observed that Genetic Algorithms offer a reliable estimation of microartefact weights. Experimental results are presented on archaeological data from the Neolithic site of Paliambela, in Northern Greece.     

3D model of the Can Sadurní cave

Graphic and metric information about the site and its environment and about the different structures and artefacts located are indispensable for the optimal management of an archaeological excavation. A Geographic Information System (GIS) proves useful in managing and analysing information and data obtained from different sources. Two techniques of data capture, Terrestrial Laser Scanning (TLS) and close range photogrammetry, are used to generate accurate and high-resolution 3D models of a cave, the silos and a combustion structure at the Can Sadurní site (Begues, NE Spain). This site is especially noteworthy on account of its complete stratigraphy of the Catalonian Holocene. The capture and processing of the photogrammetric and TLS data used to generate 3D models are discussed in detail. These models cannot be obtained by classic archaeological techniques since the record is made layer by layer, approximately one decimetre apart, with the result that the information between the layers is lost. Our findings highlight the potential of these techniques for obtaining accurate and photorealistic models that facilitate a complete analysis of the available information at an archaeological site.     

Multi-element soil prospection aiding geophysical and archaeological survey on an archaeological site in suburban Sagalassos (SW-Turkey)

In order to take full advantage of the archaeological information contained within buried archaeological sites, it is important to apply an integrative approach combining complementary prospection methods. In this study, geochemical prospection data are combined with archaeological and geophysical survey results on an unexcavated site in suburban Sagalassos (SW-Turkey), with the aim of obtaining better insights into the structural shapes and past functionalities of the area. Spatial and multivariate statistical analyses of the chemical data reveal anomalies of K, P and Zn on a location where archaeological and geophysical results suggest the presence of ceramic producing kilns. These elemental enrichments are thought to result from burning wood or dung as fuel for the detected kilns. In addition, local anomalies of Co, Cr, Fe, Mg, Mn and Ni were found to reflect the working and storage of ophiolitic clays, employed as a raw material for ceramic production. Radiocarbon dating of charcoal in a 2.5 m deep drill core in this zone provides ages between AD 120 and 350 at depths of 50 and 60 cm. Al, As, Ba, Ca, Na, Sr, Ti and Pb are considered geogenic elements in this study. The present study supports the theory that geochemical prospection holds potential as a surveying technique, as it was found that chemical data facilitate the interpretation of structures detected by geophysical and archaeological methods, thereby creating an extra dimension to the interpretation of survey data. The results further argue in favour of using strong-acid extractions and the consideration of a large suite of elements when applying chemical soil survey as an archaeological prospection technique, and highlight the importance of considering site lithology. Multivariate statistics proved to be invaluable in distinguishing anthropogenic from lithological soil patterns.     

Molluscan evidence for diet and environment at Saar in the early second millennium BC

Molluscan shells were abundant throughout the archaeological deposit at Saar. Analysis of species composition and abundance provided evidence for marine food in the diet and for local marine environments. The most important edible species were bivalves such as pearl oyster and clams with smaller numbers of gastropods, for example conch and muricid snails. The range of archaeological species indicated that there were no major changes in the intertidal marine habitats. They have not provided further evidence for the location of the prehistoric coastline which might have differed from the present day. Flotation samples contained small freshwater gastropods which have not been recorded previously from sites in the Arabian Gulf. These gave evidence for the use of water in the site and for nearby freshwater springs.     

In situ preservation of archaeological bone: a histological study within a multidisciplinary approach

To make preservation in situ a serious option for the management of archaeological sites, research has to be done on the factors affecting conservation of different archaeological materials, including bone. A European project has been started which deals with bone degradation in a multidisciplinary way. The goals of the project are to develop techniques to describe the preservation of archaeological bone, to make a classification of soil environments according to their preservation potential and to detect what factors in the environment of the bone affect its conservation. One technique used in this project to determine the state of preservation of archaeological bone is histology. The relevance of this technique for archaeological heritage management research is discussed.     

Electrical Resistivity Tomography with Angular Separation for Characterization of Burial Mounds in Southern China

The study aims at providing the spatial distribution and potential structure of the burial mounds at the Sifangling site, Hepu Han Tombs, in southern China. We implemented an electrical resistivity tomography (ERT) technique to obtain high‐resolution imaging of archaeological targets, considering the challenging environment and the depth of the burials. Three ERT profiles were tested above a small ancient mound previously detected by exhaustive archaeological drillings, following which 18 ERT profiles with angular separation were performed on the largest mound at the test site, without any a priori archaeological evidence below the surface. Then, a series of two‐dimensional (2D) profiles were combined as a ‘pseudo‐3D’ volume, which allowed a detailed characterization of the burial mound, and iso‐resistivity surfaces were also calculated to emphasize the location and spatial extent of the target. The results gave an effective identification of the funeral chamber and its structural details, and allowed detailed pre‐excavation planning.     

Magnetic imaging and electrical resistivity tomography studies in a Roman military installation found in Satala archaeological site,northeastern Anatolia,Turkey

Satala is one of the last great military centers in the Roman East available for archaeological and historical investigations. This archaeological site is situated on the crossing of two singularly important routes in North-East Asia Minor. Only little archaeological fieldwork in and around Satala has so far been carried out, thus delimiting our knowledge of the site and its role within the Roman military structure of the East. In order to provide further data on the site, we carried out geophysical surveys including the application of magnetic and electrical resistivity techniques in an area north of the Sadak village. The geophysical surveys within this area (supposedly part of the Roman military camp) proceeded in two stages. The first stage saw magnetic gradiometer imaging studies being carried out on 2.1 ha, measured by a Geoscan FM-36 fluxgate gradiometer by using 0.5 × 1 m grid intervals. For the second stage a different geophysical technique was used—resistivity tomography. Resistivity data were collected using a number of combined 2D resistivity pseudosections in the eastern part of the area which contained very regular magnetic anomalies. The 3D data were obtained by the combination of all survey lines collected from 2D data sets, and thereafter the arranged data were processed by using the 3D robust inversion modified from the smoothness-constrained algorithm. Electrical resistivity tomography investigations revealed that the buried archaeological structures might be located near the surface, except for some structures found in the middle of the studied area. The archaeological structures were furthermore determined by realistic model sections and volumetric representations. Magnetic imaging and electrical resistivity tomography surveys show that the combined usage of these techniques advances the understanding of archaeological structures beneath the surface.     

The Definition of Spatial Units in Middle Palaeolithic Sites: The Hearth-Related Assemblages

This paper deals with hearth-related accumulations in Middle Palaeolithic sites. Spatial behaviour is a key to understanding the cultural capabilities of ancient hominids. Ethnoarchaeological and archaeological research has shown that hearth-related assemblages are a basic feature in the spatial behaviour of modern and prehistoric hunter–gatherers. In this paper, we propose a methodology for analysing archaeological accumulations and study a series of hearth-related assemblages from the Abric Romanı́ Middle Palaeolithic site (Capellades, Spain). We also analyse the degree of contemporaneity between the different activity episodes documented at each archaeological accumulation. Our results suggest that the characteristics of domestic areas in this site are not substantially different from those observed in ethnoarchaeological contexts and Upper Palaeolithic sites.     

Early Anglo-Saxon settlement patterns in southern England

Current methods of studying the distribution of Anglo-Saxon place-names are discussed and it is suggested that a more careful analysis of the data is required if one is to make valuable generalizations. The methods used to explain the distribution of place-names involves linking etymology with archaeological data to deduce phases of settlement without examining closely the factors involved in site location. An attempt is made to indicate how a closer study can reveal underlying trends in the distribution of such features and it is felt that by isolating these factors the distribution will be more clearly understood.     

The spatial distribution of Palaeolithic human settlements and its influence on palaeoecological studies: a case from Northern Iberia

The aim of this study is to assess the influence of human site location choice on biogeographical and paleoecological studies based on archaeological remains, through a case study in north-western Spain. Data from an exhaustive literature survey and field trips were managed with GIS and subjected to statistical analyses. The results show that the influence of the different variables shifted through the Palaeolithic, although certain general preferences can be seen: low altitudes (median: 151 m a.s.l.), South-facing surfaces, generally gentle slopes (median: 13°) and moderate distances to water courses (median: 297 m). These choices were conditioned by geomorphological factors, with LGM glacier extent imposing an upper limit in the range of occupied altitudes and marine and fluvial terraces conditioning site location patterns. The results suggest that human site location patterns during the Palaeolithic were not random, conditioning the information available from archaeological remains. Our results allow us to identify some key areas where information on past faunal distributions, and more generally on biocoenoses, will be scarce or missing.     

U-series and radiocarbon dates on mollusc shells from the uppermost layer of the archaeological site of KHB-1, Ra's al Khabbah,Oman

The archaeological site of KHB-1, Oman, has been investigated in order to improve the chronological knowledge of the site, which is dated to the beginning of the fourth millennium B.C. on the basis of the archaeological context. Mollusc shells of the genus Anadara, coming from the uppermost layers of the site, have been dated using two different methods, radiocarbon and U-series technique. The results of the two techniques date the last occupational phase of the site from the end of the fourth millennium B.C. to the beginning of the third millennium B.C.     

Mapping the possible occurrence of archaeological sites by Bayesian inference

Regional archaeological prospections are often done by field walking, where the location of the sampled fields is often determined by factors like feared disturbance or recent plowing. The resulting data configuration can be suboptimal for spatial prediction of the archaeological potential by geostatistical methods like kriging. As an alternative, we propose a Bayesian method to map the possible occurrence of archaeological finds and compare this to indicator regression kriging. Three types of predictive models were implemented in the Bayesian context following deductive, inductive and mixed approaches to use auxiliary geographical information in the mapping. After prediction of a validation set, it was concluded that the mixed approach gave the best results in terms of map quality, and that the kriging method performed poorly. Usage of data on the presence and the absence of archaeological finds is to be preferred above usage of presence data only. Furthermore, a method is presented that filters those parts of a predictive map that are not strongly supported by evidence.     

Seventeenth-Century Vehicle of the Middle Passage: Archaeological and Historical Investigations on the Henrietta Marie Shipwreck Site

This study describes the archaeological investigations that have taken place at the wreck site of the English slave ship Henrietta Marie (1700) since its location in 1972. Information is provided on the methodology utilized during on-site archaeological data recovery, and the artifacts retrieved from the wreck site are described in detail. An account of complimentary documentary research on this wrecked slaver is also presented. Contemporary historical data gleaned from shipping lists, slaver’s logs, seamen’s wills and other sources are utilized to place Henrietta Marie within her proper context as a vehicle involved in the notorious transatlantic slave trade.     

Integrated geophysical surveys at the archaeological site of Tindari (Sicily,Italy)

The results of geophysical survey carried out at the archaeological site of Tindari, located 70 km west-north-west of Messina (Sicily, Italy), are presented and discussed. The site is one of the most important archaeological sites, about 90 ha large, on the north-eastern side of Sicily and it was one of the last Greek settlements in Sicily. Keeping in mind the vastness of the site, according to the archaeologists an area, of about 1200 m² was selected, for a geophysical survey. Electrical resistivity tomography (ERT), including induced polarization (IP) measurements, and seismic refraction tomography were applied in the course of geophysical exploration in the area. The objective of this preliminary geophysical investigation was to verify the effectiveness of the technique for a spatial definition of the buried archaeological structures (mostly walls, columns, etc.) to determine their characteristics and to study the presence of collapsed columns within the zone of archaeological interest, in view of their application in the rest of the site, that, for obvious reasons, could not be entirely excavated in brief times. The geophysical data, visualized in 3D space, revealed a distribution of low-contrast shallow anomalies that indicate the presence of different types of buried structures in the surveyed area. Also, the probable accumulations of collapsed columns could be determined. These results confirm the hypothesis of a large northern extension of the archaeological site and provide useful information to design a more efficient excavation plan.     

Bone diagenesis in the European Holocene I: patterns and mechanisms

Diagenetic changes in archaeological bone are known to influence the data derived from such material and have thus been the subject of numerous studies. A number of general trends have been observed, but many of the processes that occur are still not fully understood. We present here the analysis of 195 bones excavated from 32 sites in five different countries from Eurasia characterized using 10 simple diagenetic parameters. The results reveal that most European Holocene archaeological bone can be categorized by only four main diagenetic states related to three distinct trajectories that describe more than 60% of the variation in these parameters. Given the potential amount of variation in the dataset the small number of diagenetic pathways is surprising, but highlights the large importance of a few key factors that influence bone diagenesis. Mercury intrusion porosimetry is a key technique for identifying modes of degradation.