Molecular evidence of bitumen in the Mousterian lithic assemblage of Hummal (Central Syria)

Evidence for bitumen use in Middle Palaeolithic sites is an exception in Pleistocene archaeology. This paper presents the discovery of three tar-bearing Levallois artefacts found in the Mousterian sequence in Hummal (Central Syria). The organic residues were submitted to geochemical study. Gas chromatography–mass spectrometry analyses of saturated and aromatic hydrocarbons and isotopic data show the presence of bitumen. The most likely location of natural asphalt provisioning is the Shaaf outcrop in the Bichri desert. The bitumen-bearing stone tools add further important data to the growing knowledge about bitumen processing in the Middle Palaeolithic spring sites of El Kowm. Identification of the provisioning place for natural asphalt enables a more precise assumption about the site's catchment area. From a technological point of view, the tar-bearing specimens provide information on the range of tool forms selected for hafting. Ballistic features arguably indicate that the pointed Levallois blanks seem to be spear points that were fitted to a wooden handle. In at least one case, this technical procedure was seemingly executed during a brief episode of occupation and replacement of worn out implements. This small, bracketed window of detailed insight into Mousterian technology is linked with the more general relationship between Levallois technology and stone tool hafting.     

Single carcass of Mammuthus primigenius with lithic artifacts in the Upper Pleistocene of northern Italy

This paper presents the find of a Mammuthus primigenius carcass and associated Mousterian implements from the Last Glacial site of Asolo, in north-eastern Italy. We review the exploitation of proboscidean carcasses at Lower and Middle Paleolithic sites of Africa, Europe and the Levant, including evidence of elephant killing, and summarize recent research on hafting and use of Mousterian points as spearheads already before the end of the Middle Pleistocene. The bones and implements from Asolo are described in detail; we provide information on other Italian sites with mammoth remains and on the Mousterian record of the north-eastern quadrant of the peninsula. A possible impact fracture has been detected on a Levallois point from Asolo; its interpretation is based on comparisons to similar scars found on spear points of verified function from archaeological sites of later age, and on experimental material. We conclude that the evidence of Asolo is consistent with information from a number of Western European sites supporting a picture of Neanderthals as capable hunters of large game, such as woolly mammoth.     

Getting to the point: Evolutionary change in prehistoric weaponry

The evolution of prehistoric weaponry remains an open question in North American archaeology. The traditional model argues for an early use of the throwing spear followed by the spearthrower and bow and arrow. A major difficulty in testing this model is, identifying the functional variables that characterize different weaponry. The evolution of prehistoric weaponry is reexamined here from an evolutionary perspective where projectile points are considered part of the complete weapon system and variation within that system is identified. The engineering of four weapon systems, the thrusting spear, throwing spear, spearthrower, and bow, are examined to identify those point variables that enhance the success of the system. These variables are then measured on a 9000-year sequence of projectile points from northwestern Wyoming to examine time/space patterns. The patterns reveal that the spearthrower was in use prior to 7500 years ago.     

Experimental use and quantitative performance analysis of triangular flakes (Levallois points) used as arrowheads

The invention and widespread use of projectile weaponry is a characteristic presumed to exist only with Homo sapiens. However, as finds of wooden material during the early development of projectile weapons are extremely rare, this remains a contentious topic. Recent work has proposed a series of ballistically-significant morphological characteristics of stone points that yield information about their potential use. Here we report on initial experimental approaches to quantifying the performance of relatively simple stone points as arrow armatures. Two experimental trials were performed using a series of 51 Levallois points. The first, against a uniform density target, was designed to give an overall indication of performance. The second, against a simulated animal carcass, demonstrated the durability of these points. The results of this study suggest that small Levallois points could have functioned as arrowheads, albeit ones likely to break after limited use. They also suggest that these points’ penetrating power is strongly controlled by their morphometric characteristics, most notably their perimeter. This latter finding refines a method for assessing hypothetical Paleolithic stone points on the basis of tip cross-sectional area previously proposed by others.     

Constraints on Levallois Core Technology: A Mathematical Model

Recent volumetric definitions of Levallois core technology are amenable to mathematical modelling. We present a simple geometric model that permits controlled manipulation of a few of the key parameters defining Levallois core morphology. The models indicate that Levallois cores are relatively efficient at minimizing raw material waste while at the same time maximizing productivity in terms of total number of tool blanks and amount of cutting edge produced. Deviations from an ideal Levallois geometry produce significant declines in both efficiency and productivity. These results implicate mechanical and economic constraints as factors underlying the broad geographic distribution and temporal persistence of Levallois core technologies during the Middle and Late Pleistocene.     

The Still Bay points of Blombos Cave (South Africa)

We present the results of a technological and morphometric analysis of all the Still Bay points (n = 371) recovered from the 1993 to 2004 excavations at Blombos Cave. We have been able to reconstruct the manufacturing sequence of the bifacial points from initial shaping, by direct internal percussion, to finished morphology, by direct marginal percussion. Identifications of impact fractures and manufacturing breaks are based on comparisons with experimental and archaeological bifacial points of verified function, i.e. Paleoindian points from bison kill sites, replicates of Solutrean points mounted as spear-heads or arrowheads and shot into adult cattle, and experimental replication on local raw materials. Our analysis shows that: (a) only a minority of the points are finished forms, and that a large number of pieces are production failures, a situation known at bifacial point production sites of later ages; (b) morphometric and impact scar analyses should take into account this process and distinguish finished points from preforms and unfinished points; (c) there were at least three different kinds of raw material sources and that there is a marked increase in the frequencies of silcrete with respect to the M2 and M3 phases at Blombos; (d) three kinds of evidence prove that some of the points were hafted axially and used as spear tips; (e) production of bifacial points was a primary activity at the site but the hypothesis of intergroup exchange of Still Bay points cannot be sustained on the basis of present evidence; and (f) the Still Bay phase appears to initiate a trend to relatively rapid changes in specialized hunting weaponry and that this innovation is congruent with other innovations such as bone tools, shell beads and engraved ochre of the M1 and M2 phases at Blombos.     

A 3D morphometric analysis of surface geometry in Levallois cores: patterns of stability and variability across regions and their implications

Levallois cores and products were manufactured by hominin populations distributed across wide regions of Africa and Eurasia. Levallois technology remains an important focus for research in Palaeolithic archaeology, yet quantitative morphological comparisons of Levallois core morphology from different regions remain rare. Here, utilizing Levallois cores from Africa, the Near East, Europe, and the Indian subcontinent, patterns of morphological variability in the shape of the Levallois flaking surface and core outline (margin) shape were examined for patterns of variability and stability across regions using 3D geometric morphometrics. The multivariate statistical shape analyses undertaken revealed a clear pattern: that is, the greatest levels of shape variability in Levallois cores is evident in the form of their outline (planform) shape. Conversely, the geometrical relationship between the margin of the Levallois cores and their topological surface morphology was relatively uniform. This pattern of variability was evident in terms of variation both across regions and between cores from the same locality. These results indicate that the outline form of such cores was a less important variable than the geometric/topological properties of the surface morphology and, in particular, the relationship between the margin of the core and those variables. These results have implications for why it has been reported that replicating such cores in modern experiments is a particularly difficult task. The specific interrelationship between the geometric properties of the core and the core margin provide further evidence that Levallois core technology would be unlikely to emerge from the context of opportunistic migrating platform reduction strategies (such as those seen in many Mode 1 industries). If, as is widely suggested, Levallois cores were deliberate products in Pleistocene contexts, these results also hint that relatively sophisticated means of social transmission (i.e. teaching) may have been required to sustain their production over time and space.     

Levallois economics: an examination of ‘waste’ production in experimentally produced Levallois reduction sequences

Mathematical modelling has suggested that Levallois core morphology represents a reduction strategy driven by economic considerations; particularly the minimization of ‘waste’ while aiming to maximize cutting edge length of flakes obtained from cores of a given size. Such models are elegant in that they facilitate formal modelling of economic considerations that potentially motivate patterns seen in prehistoric data. However, the abstract nature of such models means that they do not take full account of all the practical difficulties and material challenges involved in reproducing Levallois-style reductions in stone. In particular, such models have only examined nodule morphology in two-dimensions, and did not take account of the fact that in the case of classic (lineal) Levallois reduction, core surfaces must be re-prepared between successive stages of flake removal. Hence, the potential economic implications of these factors are currently unknown, potentially undermining the significance of models that assume specific economic conditions. Here, we undertook to examine these factors using a series of experimentally produced Levallois reduction sequences. A total of 3957 flaking events were considered in our analyses, and we used six specific measures of economy to examine Levallois reduction across successive phases. Our analyses found that key assumptions of mathematical models suggesting that Levallois core morphology was driven by economic considerations (i.e. conservation of raw material when attempting to remove flakes with long cutting edges) can be upheld under the practical challenges of replicating Levallois-style reduction in stone. In supporting the notion that Levallois reduction has advantageous economic properties, our results emphasize the importance of considering why Levallois reduction did not emerge earlier in the archaeological record, and indeed, why even during the later Pleistocene the temporal and geographic distribution of Levallois technology varies. Our results also re-emphasize the value of formally modelling lithic reduction strategies in specific economic terms.     

The origins of lithic projectile point technology: evidence from Africa,the Levant,and Europe

Projectile weaponry is a human cultural universal, but its origins and antiquity remain poorly understood. Stone- and bone-tipped projectile weapons have long been treated as emergent features of the "Upper Paleolithic" behavioral revolution. Recently it has been proposed that projectile technology was in widespread use among Homo sapiens populations in Africa during Middle Stone Age (MSA) times. One obstacle to researching the origins of projectile point technology is that the criteria archaeologists employ for recognizing plausible and implausible stone projectile points are largely subjective (overall tool shape, microwear traces). Tip cross-sectional area (TCSA) is a ballistically significant dimension that works well at discriminating North American stone projectile points (spearthrower dart tips and arrowheads) from spear points. This paper compares the TCSA values of ethnographic North American stone projectile points to hypothetical Middle and Upper Paleolithic stone projectile points from Africa, the Levant, and Europe. The results of this comparison do not support the hypothesis of widespread use of stone-tipped projectiles in Africa, the Levant, or Europe prior to 40 Ka. In the New World and in Australia, where we have the richest ethnographic record of stone projectile point use, these implements are largely employed in big-game hunting and in warfare. One or both of these factors may have played a role in the widespread adoption of stone projectile point technology after 40 Ka.     

Middle Stone Age bone tools from the Howiesons Poort layers,Sibudu Cave,South Africa

Recently discovered bone implements from Middle Stone Age (MSA) deposits at Sibudu Cave, South Africa, confirm the existence of a bone tool industry for the Howiesons Poort (HP) technocomplex. Previously, an isolated bone point from Klasies River provided inconclusive evidence. This paper describes three bone tools: two points and the end of a polished spatula-shaped piece, from unequivocal HP layers at Sibudu Cave (with ages greater than ∼61 ka). Comparative microscopic and morphometric analysis of the Sibudu specimens together with bone tools from southern African Middle and Later Stone Age (LSA) deposits, an Iron Age occupation, nineteenth century Bushman hunter-gatherer toolkits, and bone tools used experimentally in a variety of tasks, reveals that the Sibudu polished piece has use-wear reminiscent of that on bones experimentally used to work animal hides. A slender point is consistent with a pin or needle-like implement, while a larger point, reminiscent of the single specimen from Peers Cave, parallels large un-poisoned bone arrow points from LSA, Iron Age and historical Bushman sites. Additional support for the Sibudu point having served as an arrow tip comes from backed lithics in the HP compatible with this use, and the recovery of older, larger bone and lithic points from Blombos Cave, interpreted as spear heads. If the bone point from the HP layers at Sibudu Cave is substantiated by future discoveries, this will push back the origin of bow and bone arrow technology by at least 20,000 years, and corroborate arguments in favour of the hypothesis that crucial technological innovations took place during the MSA in Africa.     

Paleolithic occupations of the Göllü Dağ, Central Anatolia,Turkey

Abstract

Systematic archaeological surface reconnaissance of the Göllü Da? volcanic complex from 2007 to 2012 documented more than 230 findspots with Paleolithic artifacts, ranging from isolated finds to extensive and dense scatters of artifacts. Most of the activities represented relate to exploitation of the rich obsidian resources in the region. Paleolithic artifacts are attributed mainly to the Middle Paleolithic based on the presence of Levallois technology but there is a substantial Lower Paleolithic component represented by handaxes and other large bifacial tools. Upper and Epipaleolithic sites and artifacts are scarce or absent in the survey sample. The distributions of handaxes and Levallois elements differ substantially, reflecting differences in site preservation and exposure as well as organization of prehistoric activities. Multiple variants of Levallois are represented but centripetal preferential and unipolar flake production dominate. The frequent co-occurrence of different Levallois forms suggests flexible reduction strategies. Distributions of different classes of artifact across the survey area indicate that the Middle Paleolithic occupations of Göllü Da? were not entirely oriented toward workshop activities.     

A Statistical Examination of Flake Edge Angles Produced During Experimental Lineal Levallois Reductions and Consideration of Their Functional Implications

Recent studies have indicated that Levallois-style core reduction offered potential practical benefits to hominin populations. However, none of these studies have yet considered one of the most important functional attributes of flake tools, which is edge angle. To address this shortcoming, we statistically examined flakes produced experimentally during “classic” or “lineal” Levallois core production and reduction. The primary aim of our analyses was to statistically test the null hypothesis of “no difference” between the edge angles of “Levallois” products and the flakes involved in their production. We employ existing edge angle analytical techniques and develop new comparative methodologies to assess flake blank standardization through the case of Levallois core reduction. Having determined the statistical properties of our experimental Levallois reductions, we thereafter evaluated to what extent edge angles produced may, or may not, have been useful to prehistoric hominins. Our analyses demonstrated that the experimentally produced Levallois edge angles were indeed statistically different from the flakes involved in their production. These differences were evident both in terms of relatively higher (i.e., more obtuse) edge angles than debitage flakes and in being significantly less variable around their higher mean edge angles compared to debitage flakes. However, based on current knowledge of how flake edge angle properties relate to issues of functionality, such differences would not have been detrimental to their functionality. Indeed, the edge angle properties they possess would have provided distinct benefits to hominins engaged in their manufacture. Most notably, Levallois-style core organization and reduction would have provided hominins with a reliable means of consistently producing flakes (i.e., “Levallois flakes”) possessing average flake angles that are beneficial in terms of providing a viable cutting edge yet not being so acute as to be friable upon application. Hence, edge angle properties join an array of other features that provide logical motive for why hominins may have organized core production and reduction around Levallois-style patterns at various times and places during the Mid-Late Pleistocene.     

Ballistic Study Tackles Kinetic Energy Values of Palaeolithic Weaponry

The appearance of new projectile propulsion modes is viewed as an important element for understanding human behaviour during the Palaeolithic. Because the organic components of hunting weapons (the bow, spear‐thrower and arrow, and spear shaft) are only rarely preserved archaeologically, some effort has been invested in experiments to explore how the projecting modes could be identified through the analysis of stone points. The kinetic energy developed by each mode of propulsion has been considered a key variable in these experiments. However, the data used in these studies generally come from a few ballistic studies, with varied results. We present the results of a systematic study conducted with a ballistic pendulum and combined with a classic ballistic analysis. We quantified and compared the kinetic energy developed by the four standard modes of propulsion known for the Palaeolithic. The kinetic energy values that we attained, especially those measured for thrusting spears, clearly differ from what has been assumed up to now, and thus challenge current models on the evolution of hunting technology.     

Continental Patterns in Stone Tools: A Technological and Biplot-Based Comparison of Early Late Pleistocene Assemblages from Northern and Southern Africa

The technology of the end products i.e. blades and points in Late Pleistocene stone artefact assemblages from Klasies River, South Africa, and the Nile Valley, Egypt, are compared. The comparison includes univariate and multivariate analysis of metrical attributes enhanced by graphical biplot displays. The end products in these assemblages are either dominantly points or blades and this is related to the core reduction strategy adopted. The MSA 11 from Klasies River and the Nubian Complex industry from the Nile Valley are point industries made in the Levallois tradition, while the MSA 1 from Klasies River and the Taramsan from the Nile Valley may be non-Levallois or adapted Levallois blade industries. Dating of the assemblages shows the changes between dominant core reduction strategies are sequential and time restricted in both South and North Africa. It is concluded that variability of the same kind occurs in Middle Stone Age and Middle Palaeolithic assemblages south and north of the Sahara in the early Late Pleistocene.Dans cet article, les technologies des produits recherchés, des lames et des pointes, pour certains ensembles lithiques de Klasies River, Afrique du Sud et la Vallée du Nil, Egypte, sont comparées. Cette comparaison implique des analyses univariées et multivariées de variables métriques biplot. Les produits recherchés sont bien des pointes que des lames, selon les stratégies dexploitation adoptées. Le MSA II de Klasies River et le Complexe nubien de la Vallée du Nil sont des industries à pointes issues de la tradition Levallois. Par contre, le MSA I de Klasies River et le Taramsien de la Vallée du Nil évoquent une technologie de production non-Levallois ou Levallois modifiée. Les éléments de datation disponibles indiquent que les changements dans la prépondérance des stratégies dexploitation senchaînent dans une séquence chronologique bien identifiable, aussibien dans lAfrique du Sud que lAfrique du Nord. On arrive à la conclusion quune variabilité du même caractère est attestée dans les ensembles du Middle Stone Age et du Paléolithique moyen au sud et au nord du Sahara, pendant le Pléistocène supérieur ancien.     

Why is there a lack of Mode 3 Levallois technologies in East Asia? A phylogenetic test of the Movius–Schick hypothesis

The ‘Movius–Schick hypothesis’ claims that an absence of Levallois (Mode 3) technologies in East Asia is due to the lack of a strong ancestral Acheulean (Mode 2) tradition in that region. Hence, this hypothesis is based on the assumption that similarities between Acheulean handaxes and Levallois cores can be interpreted as being phylogenetically homologous (i.e. due to common technological ancestry) as opposed to being homoplasic (i.e. due to convergent technological evolution). Here, the phylogenetic basis of this hypothesis is tested using a formal cladistic procedure. Under the framework of an ‘iterative’ approach to phylogenetic analysis, a series of post-hoc tests and re-evaluations of results follow the initial cladistic analysis. Results of these combined analyses indicate that morphological similarities between Mode 2 Acheulean handaxes and Mode 3 Levallois cores can, most parsimoniously, be seen as phylogenetically homologous. Hence, these results support the tenets of the ‘Movius–Schick’ hypothesis in suggesting that a lack of Levallois industries in East Asia may be due to the paucity of an ancestral Acheulean tradition in that region. The implications of these phylogenetic analyses for the concept of Palaeolithic ‘Modes’ are discussed. It is further suggested that low demographic levels (i.e. small effective population sizes) in East Asia may have constrained the technological phylogenetic trajectory of East Asia compared with that seen in other regions of the Old World during the Lower Palaeolithic. In addition, it is hoped that several methodological issues discussed here will contribute to the growing field of cultural phylogenetic analysis.     

Hard core and cutting edge: experimental manufacture and use of Magdalenian composite projectile tips

The technology of the European Upper Palaeolithic yielded abundant evidence of the use of composite projectile heads, in the form of osseous points on the side of which one or several (micro)lithic elements are attached. Yet, little experimental work has been devoted to testing and assessing the parameters of use of this type of composite tips. In this paper we present a pilot experiment with replicas of Magdalenian composite spear tips, made of an antler point with one or two rows of flint backed bladelets. Two series of replicas were manufactured after the lithic and osseous record of, respectively, the Lower Magdalenian from southwest France (c. 20–18 Ky cal BP) and the Upper Magdalenian of Pincevent in the Paris Basin (c. 15–14 Ky cal BP). The 34 experimental composite heads were hafted to spears that were then shot with a spearthrower at the carcasses of two young deer. The results provide some insight into the performance characteristics of the osseous and lithic components, both in efficiency and durability. Finally, possible improvements of the experimental protocol are discussed, as well as the implications of our results for the understanding of projectile point variability in the Upper Palaeolithic.     

The Clacton Spear: The Last One Hundred Years

In 1911, an eminent amateur prehistorian pulled the broken end of a pointed wooden shaft from Palaeolithic-age sediments at a seaside town in Essex. This artefact, still the earliest worked wood to be discovered in the world, became known as the Clacton spear. Over the past one hundred years it has variously been interpreted as a projectile weapon, a stave, a digging stick, a snow probe, a lance, a game stake and a prod to ward off rival scavengers. These perspectives have followed academic fashions and as the popular views of early hominins have altered. Since discovery, the Clacton spear has also been replicated twice, has undergone physical transformations due to preservation treatments, and has featured in two public exhibitions. Within this article the changing context of the spear, its parallels, and all previous conservation treatments and their impacts are assessed.     

Prepared core reduction at the site of Kudu Koppie in northern South Africa: temporal patterns across the Earlier and Middle Stone Age boundary

Kudu Koppie is a stratified late Earlier Stone Age and Middle Stone Age archaeological site located in the northern Limpopo Province of South Africa. The prepared core reduction strategies are described and temporal trends across the ESA–MSA boundary are presented. The prepared cores and endproducts of Kudu Koppie suggest that both the late ESA and MSA toolmakers employed the Levallois Volumetric Concept, but they often exploited a nodule's natural convexities and form. The MSA toolmakers used a greater variety of prepared core methods and more intensively exploited cryptocrystalline and microcrystalline nodules, the scarcity of which may have resulted in a more “formalized” application of the Levallois Volumetric Concept. These observations are considered within the context of human behavioural evolution.     

Lithic Microwear Analysis of Middle Stone Age Artifacts from White Paintings Rock Shelter,Botswana

Abstract

Excavations conducted at the White Paintings rock shelter in the NW Kalahari Desert have uncovered seven meters of Later and Middle Stone Age deposits. Lithic microwear evidence was found on 15 artifacts representing five of the major archaeological subdivisions in the sequence and revealed work in wood, hide, and bone, as well as butchering and impact damage. Middle Stone Age points found in deposits bracketed by TL dates to between approximately 66,400 ± 6500 and 94,300 ± 9400 B.P. were of special interest because of the possible association of the Middle Stone Age with the origin of anatomically modern humans and because little, if any, micro-wear evidence has been published on Middle Stone Age points. Five out of 10 points examined revealed impact damage consistent with their use as projectiles, most likely as spear points. We present a model of the use of such points for hunting medium-sized mammals with spears, an interpretation that is largely consistent with faunal remains observed in South African cave sites.