The Robinson Enterprises at Papplewick,Nottinghamshire: Part Two

Abstract

In Part One (Industrial Archaeology Review Vol IX No 1) the establishment of the Robinsons' water powered cotton spinning mills along the River Leen was described. By 1785 there were four mills working and a fifth was being built, all of them dependent on the same water supply. The operations of these mills were seriously threatened by the activities of a land owner upstream who obstructed the water flow. The Robinsons then resorted to litigation and also immediately sought an alternative source of power. Their approach to Boulton and Watt led to the commissioning in 1785 of the first rotary steam engine to drive cotton spinning machinery. The problems attendant upon its installation and early operation are described through the medium of letters and drawings in the Boulton and Watt Collections. Using these and other sources the author establishes the site location of the first steam engine and also that of the second Watt engine some five years later. She is very much indebted to Peter Neaverson for additional technical information and his interpretation of the Boulton and Watt drawings.     

Havelock Mill,Manchester: A case-study in the emergency recording of a large urban mill complex

Abstract

The early nineteenth century textile industry in Manchester is best known for its large steam-powered 'town mills', usually built in closely-packed groups alongside the canals, and for the local dominance of the cotton trade. Havelock Mill illustrates the size and complexity of these buildings but is distinguished because it incorporates the city's last intact silk mill. Documentary research and comparison with silk mills in other areas indicates that this was an exceptionally large example which was at the forefront of developments in the mechanisation of silk manufacturing. A cotton mill was later added to the site. Although parts of the complex were structurally unsound, an unusually high proportion of the original features and fittings survived.     

Framing a survey of textile mills: RCHME's West Riding experience

Abstract

Large numbers of multi-storey textile mills have become redundant in the north of England. In 1984 the Royal Commission on the Historical Monuments of England embarked on a survey of these mills in the former West Riding of Yorkshire. Following a pilot survey in the Worth Valley and Keighley, an initial survey identified 1400 mills and a ten per cent sample has been selected for fuller recording. This article discusses the considerations involved in defining the method and scope of the survey.     

David Evans & Co. The Last of the Old London Textile Printers

Abstract

The Glasgow 'Tobacco Lords' were the subject of a classic study, but there has been no overall survey of their successors, the Scottish cotton masters. This article draws on a rich and surprisingly underused source, the wills and probate inventories of Scottish cotton merchants and manufacturers, to give a fuller picture of a group, which played a key role in Scotland's early industrialisation. It also casts light on the early decline of the cotton industry in Scotland by demonstrating how, as profits declined, the cotton masters, who had always had diverse business interests, began to move into more lucrative areas of investment, such as coal mining, iron manufacturing, railways, shipping and overseas trade.     

Tom Licence,What the Victorians Threw Away. Oxford: Oxbow Books, 2015. 108 pp., 90 illus. £9.99. isbn 9781782979756

Abstract

Beehive coke ovens in Derbyshire were used to provide fuel for local blast furnaces, for the Sheffield crucible steel industry and for railway locomotive fuel. Members of the Industrial Archaeology Section of Derbyshire Archaeological Society have made a careful survey of four ranges of beehive coke ovens at Ramshaw, near Unstone, formerly the site of Ramshaw Colliery.     

Stitching Together the Fabric of Industrial Houses: Investigating the Origins and Development of Cotton Workers’ Accommodation in the Derwent Valley,Derbyshire

At the close of the 18th century, the first purpose-built industrial communities connected to mechanised cotton spinning were created in the Derwent Valley, Derbyshire. Across four sites at Cromford, Belper, Milford and Darley Abbey, three mill-owning families constructed a wide variety of purpose-built accommodation in order to house their growing workforces. This article uses a buildings-led approach to investigate the complex influences acting on the form and design of these houses. Through the analysis of historic building fabric, this research demonstrates that workers’ housing in the Derwent Valley comprised both innovative and traditional influences, reflecting the experimental character of early cotton manufacture. Ultimately, this research suggests that the array of approaches to house-building within the valley were the result of a highly nuanced interaction between the agenda, requirements and expectations of both occupant and patron.     

The Provision of Allotments in Derbyshire Industrial Communities

Abstract

This article examines how allotments fitted into the overall context of a range of paternalistic provisions; attempts to identify the extent to which workers' demand for allotments was a factor in their provision, and argues that the provision of allotments played a significant part in the shaping and development of some industrial communities. The review concentrates on five industrial communities in Derbyshire, although comparisons are drawn with similar establishments in other parts of England.     

Nash Mills—The Endless Web Revisited

Abstract

A watermill is known to have existed on the river Gade since the 11th century on the site of Nash Mills, Hertfordshire, where a purpose-built paper mill was constructed in the late 18th century. In 1810 the mill was purchased by John Dickinson, one of the great innovators of the paper industry. The mill evolved significantly during the 19th and early 20th centuries as part of Dickinson's expanding business, which at one stage comprised five mills in the locality. Nash Mills remained in the ownership of John Dickinson and his successors until 1990, ceasing production in 2006, the last of Dickinson's mills to do so. Using documentary and building evidence, this article examines the development of the mill, emphasising the relationships between personalities, events, structures, processes, and changing business and technological influences.     

Technological Continuity,Technological 'Survival': the Use of Horizontal Mills in Western Ireland,c. 1632–1940

Abstract

This article discusses the continued use of the early medieval horizontal waterwheel form, well into the post-medieval period in the Atlantic Provinces of the British Isles. It argues that archaeological and documentary evidence demonstrates that the horizontal mills of western Ireland represent the continued use of this technology from the early medieval period in to modern times. Similarly, it argues that the traditional horizontal mills of Scotland and its western islands can, on linguistic grounds, be linked into the same enduring tradition. The continued use of this technology in these societies appears to be as much a product of social context and choice, as it was a technological 'survival' in a 'marginalised' area.     

Ais Giorkis: An unusual early Neolithic settlement in Cyprus

Abstract

For over a century, archaeologists have been intrigued by the inception of food production and sedentary lifeways, the so-called “Neolithic Revolution.” Research focused on the Near Eastern and Anatolian mainlands has documented some of the earliest Neolithic cultures known. The adjacent Mediterranean islands were generally believed to have been late recipients of Neolithic economies. Recent research challenges this by establishing both Late Epipalaeolithic and early Neolithic occupations on Cyprus. Ais Giorkis contributes to this revision. It is an early Neolithic site (ca. 7500 cal b.c.) in the uplands, unlike most contemporary sites, which are near the coast. Ais Giorkis is more complex than originally believed, containing unusual architecture, abundant and sophisticated artifacts, and some of the oldest directly dated domesticated plants in the Near East. It also has a faunal assemblage that includes small numbers of cattle bones, previously undocumented before the Bronze Age, but now shown to be present at three early Neolithic sites.     

CONCRETE FILLER-JOIST FLOORS AND THE DEVELOPMENT OF LANCASHIRE COTTON SPINNING MILLS

Abstract

The concrete filler-joist floor was a form of fireproof flooring developed in the second half of the 19th century that came to be used quite extensively in industrial and commercial buildings. Iron, later steel, joists embedded in concrete provided a crude form of reinforcing. This form of flooring came to be adopted in Lancashire cotton spinning mills from the late 1870s, but there has been some confusion over the issue, which this paper seeks to clarify. The Bolton architect J.J. Bradshaw was the first known user. Some mill architects followed this lead, but others preferred forms of brick-arch flooring. Filler-joist floors ceased to be used, both generally and in Lancashire cotton mills, after around 1909 as other forms of reinforced flooring became available. Spinning mill construction moved towards the freestanding steel frame, although reinforced concrete framing was not adopted in Lancashire. Lancashire architects have been seen as conservative. However, it is argued that this was not necessarily a bad thing, and that they were willing to use new methods where these were seen as advantageous.     

Summerley Colliery Coke Ovens

Abstract

In the late nineteenth century there were over a thousand beehive coke ovens operating in Derbyshire, many of these concentrated in a small area between Dronfield and Chesterfield in the north east of the county. The best surviving examples are in the double range of 48 ovens on the former Summerley Colliery site. This is a scheduled monument, and is probably the largest intact range of beehive coke ovens in the UK, but the structure is deteriorating and extensive remedial action will be required for it to be preserved. The Industrial Archaeology Section of the Derbyshire Archaeological Society have carried out a survey which it is hoped will prompt the formulation of a plan for the future conservation of the site.     

Characterizing the rural landscape during the Iron Age and Roman period (ca. 1200 b.c.–a.d. 400): An intensive survey of Wadi al-Feidh,southern Jordan

Abstract

Archaeological surveys in the southern Levant have traditionally focused on areas with favorable climates and flat terrain where large urban sites are found, corresponding with a research focus on social complexity and state formation. Fewer surveys have explored the rocky, difficult-to-reach areas where large-scale agriculture was rare. This article uses survey data from the 2009 survey of Wadi al-Feidh, southern Jordan, to demonstrate the importance of exploring these environmentally marginal areas. Employing an intensive survey methodology, we recorded a range of sites and features previously unrecognized in this region. These findings suggest that subsistence patterns shifted from small-scale, mixed agro-pastoralism in the Iron Age (1200–586 b.c.) to a more intensive, top-down strategy of agricultural production by the Roman period (ca. 100 b.c.–a.d. 400). The results provide new insight into regional socioeconomic change in the southern Levant from the perspective of peripheral communities.     

The R.C.H.M.E./G.M.A.U. Joint Survey of Textile Mills in Greater Manchester

Abstract

This paper outlines progress during the first two years of the Greater Manchester Textile Mill Survey, which started in May 1985. A county-wide index to mill sites has been created, based on cartographic information, which aims to assist the assessment and comparison of large numbers of mills. A range of documentary research was undertaken and a representative sample of sites selected for individual study. The paper concludes with summaries of two selected sites in Ancoats, Manchester.     

Iron Working in the Vicinity of Weybridge,Surrey

Abstract

The presence of eighteenth-century iron working mills and the coincidental local, but limited, source of iron in the Weybridge area of Surrey, has led a number of authors to suggest that these mills smelted locally extracted iron ore. The present author has described elsewhere the occurrence of the ore and indicated that extraction was in pre-mediaeval times, probably during the Iron Age. In further support of this theory, the original records of Iron Age archaeological sites in the area are shown to reveal positive evidence of iron working. The history of the iron mills throughout their restricted period of iron working is also described, and at each site a close association between the fabrication of iron, and brass and copper products, where the metal is of undoubted extraneous origin, is evident.     

Uncovering Huber Lifeways: An Overview of Findings from Four Years of Excavations at the Huber Phase Middle Grant Creek Site (11WI2739) in Northern Illinois

ABSTRACT

This article reports on recent findings from the ongoing archaeological project at the single- component early seventeenth-century Huber phase site, Middle Grant Creek (11WI2739), located at Midewin National Tallgrass Prairie in Will County, Illinois. Excavations and geophysical surveys conducted over the past four years are yielding valuable data that are expanding our understandings of this critical period just prior to European colonialism. Findings have revealed a wide range of protohistoric activities, including foodways, skilled craft production, and ceremonial activities as well as far-flung trade relationships that illustrate the endurance of Indigenous trade networks into at least the early seventeenth-century. This article introduces the latest findings from Middle Grant Creek and brings them into discussions of this key period in Midwestern archaeology.     

The reburial of mosaics: an overview of materials and practice

Abstract

A significant proportion of the literature on the reburial of archaeological sites concerns mosaics. These publications reveal that a variety of materials have been used for mosaic reburial, including specialized fill and separation layers, from the early 1980s onwards. Although reburial practice often demonstrates an ad hoc and indiscriminate use of fill and separation materials, or the following of trends and anecdotal information favouring certain materials, knowledge of their characteristics is very important in developing an appropriate technical design for reburial of mosaics. The materials most commonly employed in mosaic reburial practice, including geotextiles, are reviewed and an assessment of their positive and negative characteristics within a reburial design is provided. Recent but limited laboratory and field testing, monitoring and evaluation of reburial interventions have begun to provide preliminary evidence about the behaviour of these materials, indicating which ones are most appropriate and how they should be utilized to best advantage. However, their selection and use remains uneven, and positive results continue to be as much a function of adequate maintenance as proper design and execution.     

Housing the Loom, 1790-1850: A study of industrial building and mechanisation in a transitional period

Abstract

The architecture of the textile mill changed radically during the late 18th and 19th centuries. Influences affecting mill design included the way in which production was organised and the degree to which processes were mechanised. This article examines how the industry developed new building types to accommodate looms. In the early period, handlooms were frequently concentrated in distinctive loomshops. The powerloom, introduced in the early 19th century, presented new problems, and in an experimental period different branches of the industry developed different means of housing the new machines. The single-storeyed shed was the dominant building type adopted for powered weaving, but there were in the silk and tape branches prominent examples of factories in which powerlooms were housed in purpose-built multi-storeyed mills.     

Transferring the Spinning Jenny to Barcelona: An Apprenticeship in the Technology of the Industrial Revolution

Abstract

The exceptional documentation which exists on the introduction of the spinning jenny in Barcelona between 1784 and 1788 has been used in this article to reconstruct the early history of Spain's first cotton spinning mill. The extent of the data available serves to provide information on the technical characteristics of the machine. Of particular interest is the information about the character of the pre-spinning processes before the adoption of the carding engine. Light is also thrown on the issue of technological transfer, shown to be a 'wide' process requiring the learning of manufacturing as well as machine-making skills.