Particle size distribution of lithic assemblages and taphonomy of Palaeolithic sites

Lithic debris derived from knapping and used tools can be assimilated to simple sedimentary particles that may undergo size sorting when exposed to geomorphic processes such as streamflow or overland flow. Sorting can be identified by comparing the size distribution of archaeological assemblages to that of experimental core reduction sequences. A new database including different types of raw material (mainly flint and quartzite) and Palaeolithic debitage (blade, Levallois, discoid, on anvil, and shaping) has been built for this purpose. Palaeoeskimo data have also been added to illustrate microlithic industries. For all the debitages and raw materials, the particle size of knapping products >2 mm in width fits with a power-law distribution and shows only minor fluctuations, the range of which is always <15% between experiments (all steps of the chaîne opératoire included up to the final tool). A lithic assemblage derived from block/core knapping or blank/preform production will display a particle size distribution close to the experimental distributions if not subsequently modified. Modifications may originate either from sedimentary processes or from anthropogenic factors. To help distinguishing amongst these, data on the impact of both water flows on sedimentary particles or experimental assemblages, and anthropogenic processes such as importation-exportation (of core, preforms or finished tools) or uneven spatial distribution of the different steps in core reduction and tool production within a site, are reviewed. By contrast to anthropogenic modifications, sedimentary processes are generally typified by strong impoverishment in or selective accumulation of fine-grained (<10 mm) artefacts together with a low intra-site variability (spatial homogenization) or a downslope size trend. Archaeological case studies taken from French Palaeolithic site are then detailed. Evidence for lithic redistribution implies that care should be taken in archaeological site analysis since sorting may impact significantly the initial techno-typological balance of the assemblage.     

Pitted stone cobbles in the Mesolithic site of Font del Ros (Southeastern Pre-Pyrenees,Spain): some experimental remarks around a controversial tool type

The presence of cobbles with activity-related marks in the Mesolithic site of Font del Ros (Berga, Spain), and in particular one group of artefacts – pitted stones – raises problematic issues associated with the characterization of percussion activities. Although these artefacts have generated an extensive bibliography on ethological, ethnographic, ethnoarchaeological and archaeological levels, various questions persist in relation to their possible contextual function. In this paper we present the results of an experimental programme in which three types of activities that could create pitted stones are reproduced: bipolar knapping of vein quartz, hazelnut cracking, and hazelnut grinding. The aim of this experimental programme is to describe marks and use-wear traces related to such activities.     

Chipped Stone Debitage,Material Selection,and Expedient Tool Production in Southeast Michigan

Abstract

This article summarizes the results of exploratory analyses on material sources and debitage attributes from chipped stone artifacts at sites identified and sampled by the Eastern Michigan University Field School along the Huron River Valley in southeast Michigan. Several hypotheses are tested with chipped stone debitage assemblages from 35 prehistoric sites to better understand material selection, expedient versus formal tool manufacturing, and the influence of material availability and mobility in chipped stone processing within the region. The distribution of debitage attributes (reduction stage, technology, condition, and size) are first compared by material source and quality. Then, the distributions of materials and debitage attributes are compared among small limited-use sites and two early Late Woodland small settlements. The results indicate a heavy reliance on poorer quality local cherts, and a focus on expedient tool manufacturing with both the local poorer quality and the nonlocal higher quality sources. There were no major differences in debitage assemblages between the limited use sites and the settlements.     

Debitage variability among multiple flint knappers

Five flint knappers produced both multidirectional cores and early stage bifaces. The debitage assemblages were compared to evaluate if, and to what degree, the debitage created by one flint knapper varies from that of other flint knappers. The debitage from these reduction episodes was then analyzed with commonly used and replicable debitage attributes. Each knapper was evaluated in terms of his/her individual consistency, and the debitage produced was tested for each ratio scale debitage attribute to ensure that the variability found between knappers was not a product of variation within the assemblages of the individual knappers. The debitage from the individual flint knappers was found to be highly variable between knappers for both technologies.     

LA-ICP-MS analysis of quartzite from the Upper Gunnison Basin,Colorado

We report the results of LA-ICP-MS analysis of 402 quartzite samples representing 48 collection loci in the Upper Gunnison Basin (UGB), Colorado and determine the extent to which the sources can be geochemically discriminated from one another using this non-destructive technique. The ability to differentiate among the sources would open the door to provenance studies of the quartzite chipped-stone tools and debitage that constitute 95% or more of most of the 3000-plus prehistoric site assemblages documented in the UGB. Our samples represent prehistorically quarried and non-quarried quartzite sources, including outcrop (primary) and gravel (secondary) deposits. The results reveal spatial and chronological trends in quartzite elemental composition that can be exploited for provenance determinations of quartzite artifacts from UGB sites, albeit using an assemblage-based sourcing strategy that differs from the familiar approach of “matching” obsidian artifacts to their statistically likeliest geological source. We offer a preliminary version of a sourcing protocol for UGB quartzite.     

A late Middle Stone Age artifact assemblage from Sibudu (KwaZulu-Natal): comparisons with the European Middle Paleolithic

It has been suggested that many behavioral innovations, said to appear during the late Middle Stone Age in sub-Saharan Africa, facilitated the expansion of anatomically modern humans from Africa and the Near East into Europe at about 50 kyr; the process eventually led to the replacement of Neanderthals by modern humans and the emergence of the Upper Paleolithic. However, assemblages in this time range are little known in South Africa. In fact, the transition from Middle to the Later Stone Age in Southern Africa is controversial. The early appearance in South Africa of many innovations, such as sophisticated knapping techniques (e.g. the use of soft hammer or indirect percussion in blade production, of composite tools, of microlithic and bladelet technologies) remains to be established through technological analysis.We present here the first results of a project designed to carry out detailed technological studies of several lithic assemblages in South Africa and France dated to the transition period. At this time we have completed the study of a post-Howiesons Poort assemblage from the rock shelter site of Sibudu.The >2 m deep stratigraphic sequence of Sibudu extends from Howiesons Poort at its base to final Middle Stone Age, directly under Iron Age layers. We have analyzed in detail layer RSP (ca. 53 kyr, 1 m above the Howiesons Poort levels) which has provided a large assemblage of several thousand stone artifacts. Compared to published MSA assemblages this industry is unusual for the very high proportions of retouched pieces (15%). The technology is not very elaborate and there is no strong standardization of the end-products. There are no flakes of predetermined shapes; retouch is used to modify irregular flakes to obtain desired edges. Knapping of flakes and blades is done by hard hammer; soft hammer is used only for retouching tools. Interestingly the older Howiesons Poort blades were produced on the same raw materials by soft hammer. Raw material (hornfels and dolerite) was procured from distances of less than 20 km. Unifacial points are the dominant type and there is strong evidence of hafting and use as spear armatures. Detailed comparisons with Middle Paleolithic assemblages of Western Europe show that the late Middle Stone Age technology in South Africa is very similar to that of the Middle Paleolithic; in fact we see no fundamental differences between the two entities, as far as lithic technology is concerned. Implications for the Out of Africa hypothesis are discussed.     

How flakes shatter: a critical evaluation of quartz fracture analysis

Despite its worldwide use as a stone tool raw material, quartz is known to be a difficult material for archaeologists. The main reason for this is the tendency of quartz flakes to fragment during detachment, which complicates the use of traditional lithic analyses. In this article we present an experimental study of quartz flake fragmentation. We evaluate the method called fracture analysis that has been developed and used explicitly for the study of quartz assemblages. The method assumes high predictability of quartz flake fragmentation, but our experiments show that there is significant variation in fragmentation that fracture analysis does not take into account. Our results indicate that this variation is partly explained by indenter hardness, the relative thickness of the detached flake, as well as individual knapper-related factors. These results undermine the applicability of quartz fracture analysis in its current form. In addition, we discuss the effects of flake fragmentation on the technological organisation of prehistoric quartz users and suggest that it has affected reduction strategies as well as blank and tool dimensions. We also suggest that there should be mobility-related differences in archaeological assemblages in terms of the quality of the quartz raw material and that the curation of quartz should be low in relation to better quality raw materials used parallel with it.     

The application and misapplication of mass analysis in lithic debitage studies

The technique of debitage mass analysis based upon size grades of debitage populations is shown to be prone to errors when making interpretations about the kind of tool produced or the kind of lithic reduction technology used. Significant sources of error may originate from differences in individual flintknapping styles and techniques, raw material size and shape variants, and mixing of debitage from more than one reduction episode. These sources of error render debitage Mass Analysis ineffective for determining the kind of stone tool reduction activities practiced at excavated sites. Mass Analysis may be effective for determining artifact reduction sequences if it is used on debitage from a single reduction episode or part of a reduction episode. However, it is shown that Mass Analysis when used for assessing reduction sequence information, must also control for the effects of raw material variability, assemblage mixing, and flintknapping styles.     

The Howiesons Poort and MSA III at Klasies River main site,Cave 1A

We present the results of a technological analysis of the Howiesons Poort and MSA III lithic artifacts from Cave 1A at Klasies River. We studied most of the debitage and retouched pieces from Deacon's excavations (about 3000 pieces) and all the cores and retouched pieces from three layers of Singer and Wymer excavations (640 pieces). Our analysis shows: (1) that HP blade production was based on the use of marginal percussion by soft stone hammer, as at Rose Cottage; (2) that impact scars at Klasies, Rose Cottage and Sibudu indicate that the backed pieces were hafted in two different ways; and (3) that the HP backed pieces were an innovative way of hafting spear tips but are not clear evidence of the invention of bows and arrows.We document the gradual evolution of debitage techniques within the HP sequence with progressive abandonment of the HP technological style. Very similar trends occur in the upper part of the HP sequence at Rose Cottage. The similarity in temporal trends between sites separated by more than 600 km has significant implications for the disappearance of the HP industry. We suggest that the disappearance of the HP was not due to a phenomenon of population contraction and isolation that caused the collapse of social networks. The internal evolution and parallel process of change documented at Klasies and Rose Cottage speak against a collapse of social systems and are associated with evidence of environmental and subsistence changes at the transition MIS 4/3.     

Recognising burnt vein quartz artefacts in archaeological assemblages

The primary aims of this study were to determine how vein quartz behaves in an open wood fire and to suggest how burnt quartz may reliably be distinguished from unburnt quartz. Experimental burning was conducted on 10–50 mm pieces of knapped quartz collected from outcrops and beach cobbles near a later Mesolithic and Neolithic quartz scatter at Belderrig, north County Mayo, Ireland. Burning resulted in considerable fragmentation, with the majority of post-burning fragments <10 mm in size. Compared to experiments with flint, few quartz pieces were expelled from the hearth during burning, probably due to lower water content. Burning reduced the lustre and transparency of quartz and oxidized any iron-bearing rock impurities to a red-brown or pink colour, but these changes could only be diagnostic of burning where unburnt quartz of the same type is available for comparison. Burning did not affect the texture of the quartz, though quartz grain boundaries became more visible in some samples. Under the microscope, all >5 μm fluid inclusions in quartz lost their fluid contents, often with the development of fluid escape structures, and this is likely to be a reliable discriminant between burnt and unburnt vein quartz generally, even in the absence of unburnt material for comparison. Burning also creates microfractures, but this feature does not provide a diagnostic test of burning as there is considerable overlap between burnt and unburnt samples in microfracture density.     

Raspadita: a new lithic tool from the Isthmus of Rivas,Nicaragua

A new lithic tool type was discovered at the Pacific Nicaraguan archaeological site of Santa Isabel (AD 800–1350) and named raspadita (small scraper). Thousands of these small tools (1–2 cm in length) were found. They have a rounded proximal edge and a pointed distal end. In this study, the raspaditas are proved to be a coherent tool class with minimal variation in size, shape, material type and usewear. They were manufactured from white chert bladelet cores using soft hammer percussion and pressure flaking unifacial retouch. Usewear points to a composite tool form and a scraping function for the raspaditas. Scanning electron microscopy determined a ventral leading, dorsal following, unidirectional scraping motion for the raspadita proximal end. The material that was scraped has still to be definitely determined but phytoliths visible in the SEM images suggest that the composite tool was used for plant processing.     

Hits and misses when throwing stones at mass analysis

Mass Analysis (MA), a well-recognized method of flake debris analysis, has generated significant interest in size-grade variables for investigating prehistoric lithic technologies, criticism of such usage, and combination methods developed to address some of those criticisms. A recent critique concluded that there are significant sources of error that preclude the use of MA for investigating prehistoric assemblages. We disagree with this generalization, but recognize that uncritical application of MA by non-lithic specialists is unlikely to yield useful results. Confusion as to what constitutes MA versus other size-grade approaches is a significant consideration. We address these issues as well as replicator variability, raw material, debitage mixing, diagnostic signatures, and the necessity of multivariate analysis in demonstrating that in many cases the attacks on MA are based on faulty evidence or are misguided. We advocate the use of a multiple lines of evidence approach that incorporates aspects of MA. Continued experimentation and application to particular archaeological assemblages in a cyclical fashion is necessary to explore more fully the utility of MA.     

What novice knappers have to learn to become expert stone toolmakers

The aim of this paper was to determine what technical gestures must be learned in order to produce stone tools. To identify these gestures, we compared the performance of expert knappers and complete novices. We hypothesised that the differences between novices and experts would indicate which technical gestures experts had learned to successfully produce stone tools. Participants were video recorded while attempting to produce a crude handaxe. The recordings were analysed according to ethological methods used to study animal and human behaviour. The knapping performance of each participant was segmented and scored into units in order to identify the technical gestures being used. The results showed considerable differences between experts and novices in three technical gestures: the type of percussion support, the position of the blank and the angle of blow. Therefore, these three technical gestures appear to be crucial in learning to knap stone at the level of bifacial stone toolmakers. By studying how modern knappers gradually master these three technical gestures we may begin to understand how stone knapping is acquired, how bifacial stone tools emerged and what cognitive challenges early handaxe makers had to face.     

Evidence for kill-butchery events of early Upper Paleolithic age at Kostenki,Russia

At least 10 early Upper Paleolithic (EUP) open-air sites are found at Kostenki on the west bank of the Don River in Russia. During the 1950s, A.N. Rogachev excavated concentrations of horse bones and teeth from EUP layers at Kostenki 14 and 15 exhibiting the characteristics of kill-butchery assemblages. Excavations at Kostenki 12 in 2002–2003 uncovered a large quantity of reindeer and horse bones in EUP Layer III that also might be related to kill-butchery events, and the partial skeleton of a sub-adult mammoth excavated during 2004–2007 in EUP Layer V at Kostenki 1 yields traces of butchery. The character of these large mammal assemblages – combined with the analysis of artifacts and features – suggests that both habitation areas and kill-butchery locations are represented in a “EUP landscape” at Kostenki.     

Bipolar Reduction and Behavioral Variability During the Mid-Late Holocene at Eagle's Nest,Mount Sinai Harbor,New York

Recent syntheses for the Long Island Sound region argue for long-term cultural continuity amongst Holocene coastal hunter-gatherers. These notions derive primarily from studies of quartz lithic assemblages, which archaeologists argue show structural stasis over time. The remaining variability is explained with a ‘distance to source' model in which near-coastal sites tend to show a lack of quartz conservation while interior sites show quartz recycling. Under this model, technological strategies traditionally associated with raw material conservation (e.g., bipolar reduction) should not occur at near-coastal sites. We test the ‘distance to source’ model by reexamining a quartz lithic assemblage from Eagle's Nest-Long Island's richest Holocene coastal hunter-gatherer site. We find conclusive evidence for bipolar reduction in the site's “block/shatter” materials. Toolmakers used bipolar reduction to conserve raw material. Toolmakers also used anvils and bipolar reduction to open quartz cobbles, to stabilize freehand cores, to efficiently access cutting edges, and possibly to create crushed coarse quartz temper for pottery production. Our results point to previously unrecognized aspects of behavioral variability in the Eagle's Nest lithic assemblage and to possible revision of the ‘distance to source’ model. Similar variability may be present at other North American sites with quartz “block/shatter” material.     

The Spatial Organization of Bone Crafting During the Middle and Late Mesolithic at Ringsjöholm and Strandvägen in Sweden

This paper focuses on the spatial distribution of bone tool production waste from two Mesolithic sites in Sweden, Ringsjöholm and Strandvägen, with well-preserved faunal remains including bone and antler artifacts. Local production on both sites has generated a variety of identifiable waste products deriving from complete chains of production, including unmodified bones, debitage and finished products. Identified categories include: blanks, removed epiphyses, bone flakes, and preforms. Identification of species shows that antler and bone from red deer were the preferred raw materials. Spatial statistical analyses confirm that different stages of bone tool production were organized within separate areas of the sites and that larger items were discarded in the water along the shorelines. Interestingly, blanks and preforms seem to have been stored under water for future use and demarcated clusters of bone flakes in association with dwellings represent “bone knapping floors” where production was more intense than in other areas.     

On the spatial and technological organisation of hafting modifications in the North African Middle Stone Age

Aterian stone tools represent one of the clearest indications of technological regionalisation in the North African Middle Stone Age. Found in association with Homo sapiens skeletal remains and more recently with symbolic material culture, the Aterian is widely thought to reflect modern human identity and cognition. As a lithic industry, the Aterian has been primarily defined by the presence of stemmed or tanged tools, but there has been little quantitative study of the relationship between tangs and other forms of hafting modifications, such as shouldering and basal thinning. Understanding the diversity of these features and their relationships with one another will clarify the organisation and adaptations of North African populations during Marine Isotope Stage 5 (MIS 5, ∼130–70,000 years ago), a critical timespan for modern human dispersal. This paper presents the results of a stepped analysis of fifteen Aterian and other non-Aterian assemblages from the same spatial and temporal bracket in North Africa. Using Correspondence Analyses together with a suite of other statistics, the results indicate that tanging represents a widely applied strategy of hafting a variety of different tools. On the other hand, basal thinning is specifically correlated with lightweight, highly retouched points. The distribution of these features appears to reflect geographical proximity and shared environments, rather than articulating with traditional named industries. This in turn suggests that a continued focus on tangs to differentiate an ‘Aterian’ from other, contemporary North African MSA industries may be obfuscating regional-scale patterns of technological diversity.     

Middens,Construction Fill,and Offerings: Evidence for the Organization of Classic Period Craft Production at Tikal,Guatemala

Abstract

The production of artifacts of stone, shell, and bone at Tikal, an important center in the Southern Maya Lowlands, created quantities of durable waste, referred to as debitage. Yet debitage is not a reliable indicator of production area because of the spatially flexible nature of Prehispanic technology and site-maintenance activities that shifted manufacturing debris into secondary contexts. Nevertheless, debitage, even in secondary context, provides important information on the organization of craft production at Tikal, particularly during the Classic Period (ca. A.C. 250–850). Most crafts were organized as household industries, carried on by independent, part-time specialists living in the central area that surrounded the monumental core of the city. The elite probably supported some full-time production to satisfy their demands for status goods and tools for construction projects. Expedient production by nonspecialists, using locally available materials such as chert and bone, occurred at all times.

Production waste was recovered from the construction fill of public and residential architecture and from household middens, mixed with domestic trash. The largest concentrations, however, were found exterior to elite chamber burials and within cached offerings. The delayed identification of debitage from ritual contexts exemplifies the reflexive nature of the way archaeologists classify material culture and their interpretations of the contexts from which it is recovered.     

Points and convergent tools in the European Early Middle Palaeolithic site of Payre (SE,France)

The lithic assemblage from the Middle Palaeolithic site of Payre (Rhone Valley, France) contains a large number of convergent tools and pointed tools of various shapes, sizes and retouch types. These were excavated from several archaeological units, dating from marine isotopic stages 8–5, which also yielded human skeletal remains. Consideration of this large tool kit has led to an improved analysis of Middle Palaeolithic tools with two retouched convergent edges. The 350 tools were not described within the classical typological framework, but, rather, from a lithic technological perspective in relation to a discoid debitage. In addition, an initial macroscopic use-wear analysis aided in establishing whether they were used according to their technical and/or morphological features. The Middle Palaeolithic convergent tools from Payre are shown to be quite diversified, and the question of the significance of the retouch and the definition of the various types is addressed. Initial functional results indicate that a clear relationship between shape and function cannot be easily established, and that these tools were used as hand tools. This study contributes to the debate on the use of stone tip spears in the Early European Middle Palaeolithic.     

Blade technology and tool forms in the Middle Stone Age of South Africa: the Howiesons Poort and post-Howiesons Poort at Rose Cottage Cave

It has been suggested that between 80 and 35 ka the Middle Stone Age record of South Africa reveals episodes of inventiveness and innovation, punctuated by apparent returns to more conventional technologies. One such episode is the Howiesons Poort (HP). The appearance of a range of small geometric forms, apparently used as insets in multi-component tools, has been considered as evidence of improved hunting weapons, with possible social and symbolic connotations. On the basis of evidence such as backed tool production, small blade technology, the occurrence of typical end-scrapers and burins similar to those encountered in the European Upper Paleolithic, long-distance transport of fine-grained raw materials, and non-lithic novelties, the HP is associated with increased levels of technological efficiency and with behavioral innovations that could have allowed the expansion of African populations to other regions. Yet our knowledge of HP technology and tool production is limited to the analysis of Klasies River Main site by Singer and Wymer and Sarah Wurz, and a few preliminary reports from other sites. This is why we present here a detailed technological and typological analysis of several HP and post-HP assemblages from the well-excavated, well-dated and well-stratified site of Rose Cottage. Our analysis shows: (a) that the HP blade production was a real technical innovation, but was not based on indirect percussion, as often suggested; (b) that blade production was based on the use of marginal percussion which does not occur in the blade production of the Eurasian Middle Paleolithic; (c) that the tool kit was dominated by backed pieces, but not all can be considered as hunting weapons; (d) that neither end-scrapers nor burins are typical of this industry and are no more an antecedent to the European Upper Paleolithic than the end-scrapers and burins of the Middle Paleolithic; (e) that patterns of raw material procurement do not conform to models based on evidence from Klasies; (f) that diachronic changes within the Rose Cottage sequence indicate slow, gradual abandonment of the technological style of the HP; (g) that the post-HP assemblages are of MSA character and are typologically and technologically quite similar to the European Middle Paleolithic; (h) that the lack of persistence of the HP innovations is in need of an explanation. The HP is not a monolithic entity. Implications for the symbolic interpretations of the HP phenomenon are discussed.