The technology of Stone Age colonization: an empirical,regional-scale examination of Clovis unifacial stone tool reduction,allometry, and edge angle from the North American Lower Great Lakes region

There is now broad consensus that the appearance of Clovis in Northeastern North America (Great Lakes, New England) represents a colonization pulse into recently deglaciated landscapes. Due to the increased resource uncertainty that comes with colonizing unfamiliar landscapes, it was hypothesized that the majority tool component of Clovis assemblages, unifacial stone tools, should have been knapped on tool blanks possessing the design properties of longevity and functional flexibility to facilitate exploration mobility and guard against the absence of toolstone sources in the new landscape. These properties are optimized by large, flat flakes, possessing large surface area relative to flake thickness. Since discarded and, at times, exhausted unifacial stone tools do not preserve the original dimensions of the blank upon which they were created – necessary items for a true test of blank morphology selection – this study presents a set of predictions for inferring whether Clovis unifacial stone tool blanks were selected for the properties of longevity and functional flexibility based on evidence that Clovis people actually capitalized on those properties. Due to the nature of Clovis unifacial stone tools, tool size was of necessity used as a proxy for tool reduction, on the grounds that smaller tools are more likely to have been resharpened than larger tools, at least in the case of unifacial flake tools. The results showed that less resharpened tools possessed flatter, less spherical shapes than the more resharpened tools, which possessed more globular, spherical shapes, suggesting Clovis foragers exploited the retouch potential afforded by the larger, flatter blanks. Edge angles showed no relationship with tool reduction, suggesting that Clovis foragers exploited the functional flexibility afforded by flatter blanks by adjusting the edge angle to be either higher or lower as needed. These results are consistent with the notion that human colonizers, who did not know the abundance or location of stone outcrops prior to settling an unfamiliar territory, not only “geared up” before leaving a stone source, but geared up as efficiently as possible by carefully selecting the blanks they chose to carry. Broader implications for such careful unifacial stone tool blank selection are discussed.     

Cut marks on the Middle Pleistocene elephant carcass of Áridos 2 (Madrid,Spain)

Áridos 1 and Áridos 2 (Madrid, Spain) are two Middle Pleistocene sites belonging to the isotopic stages 9–11. Both places contain partial carcasses of Elephas (Paleoxodon) antiquus associated to Acheulian stone tools. In this work, the taphonomic study of the elephant remains of Áridos 2 is presented. This study has documented several cut marks on different bones, which indicate bulk flesh and viscerae extraction by Middle Pleistocene hominins. Several arguments are provided to support that at least some of the cut marks were made with handaxes, further suggesting that some of these artifacts were butchering tools in this stage of human evolution. Although cut marks on elephant carcasses have been documented at some Middle Pleistocene sites, very few have been published in detail to allow consideration of their status as hominin-imparted marks. By doing so, the present study provides more evidence of large carcass exploitation by hominins during this period.     

BEYOND INTERMARRIAGE: THE ROLE OF THE INDIGENOUS ITALIC POPULATION AT PITHEKOUSSAI

Debate has long raged over the nature and extent of contact and cooperation between the Greeks and the Levantines at the site of Pithekoussai on the Tyrrhenian coast of Italy. The native Italic population, however, has been largely overlooked or viewed as a marginal or fringe element. Italic fibula types, which are found extensively in the cemetery, have been traditionally interpreted as evidence for the intermarriage of Italic females into the colonial settlement. This concept has limited our understanding of the role or impact of the Italic population at the site, effectively obscuring any more nuanced or balanced interpretations of their activity. A detailed analysis of several tombs from Pithekoussai, which contained iron tools or instruments, indicates that the Italic population was more actively involved in the creation of material culture at the site than has previously been supposed. Parallels for the practice are found widely on the Italic mainland and have often been associated with elite customs or funerary rituals. The presence of such practices at the site of Pithekoussai indicates the active impact of the native Italic population and the dynamic effect that diverse members of the community had on the creation and promulgation of a uniquely Pithekoussan identity.     

石寨山文化农业述略

以考古发现及既有研究成果为基础,可对战国秦汉时期滇池区域石寨山文化农业面貌进行讨论。石寨山文化有完整的农业技术体系。该文化居民有一套完整的以锄、铲、镰、斧等为代表生产工具体,且工具种类的使用具有倾向性,牛耕还尚未运用到农业生产中,稻、麦、粟复种的作物结构已形成,掌握一定的灌溉以及粮食储存技术,并且还可能有一套较为完整的农业仪式。     

Quartz-tipped arrows older than 60 ka: further use-trace evidence from Sibudu,KwaZulu-Natal,South Africa

This paper discusses the results of a detailed functional study of 16 microlithic backed tools made on quartz, and newly excavated at Sibudu Cave, KwaZulu-Natal, South Africa. The layers associated with the artefacts have OSL ages of 61.7 ± 1.5 ka, 63.8 ± 2.5 ka and 64.7 ± 1.9 ka and represent the Howiesons Poort Industry at the site. I show that more than 50% of the pieces could hardly have been used in any way other than to tip arrows in a transverse position. This outcome supports previous inferences that some of these small stone tools, and perhaps a bone point from the same context, signify the use of bow and arrow technology during the Middle Stone Age. In addition to transversely hafted arrow tips, there is also evidence that some of the tools could have been hafted diagonally. Such tools could have been used equally successfully as arrow tips or barbs, or as barbs for hand-delivered spears. The variation in hafting configuration for these geometric shapes signifies hunting technologies that were flexible and most likely adapted according to need, preference, season and/or prey type.     

UNRETOUCHED BLADES IN THE LATE MESOLITHIC OF SOUTH SCANDINAVIA. A FUNCTIONAL STUDY

Summary. While most microwear analyses of flint artefacts have involved formal retouched tools, this paper concentrates on unretouched blades from 4 South Scandinavian Mesolithic sites, seeking to establish how frequently and on what materials such pieces were used and whether they were selected for identifiable morphological reasons. The results are based on a study of 496 specimens, from various archaeological contexts. The materials processed ranged from soft to medium hard and most blades were used once only, as disposable tools. Their role relates more to 'manufacturing'than 'subsistence'activities. Blades seem to have been selected mainly according to their edge angles, with specific tasks in mind (a situation for which ethnographic parallels can be quoted), and they were evidently deliberately struck with a view to use rather than being chosen from random débitage. Various aspects of these conclusions are discussed.     

浅析新石器时代生产工具中的“仪式用斧”问题——兼论生产工具功能的分化

石铲和石钺在我国新石器时代之初是较为普遍的生产工具,后来随着社会经济的发展和原始宗教力量的增强,部分石铲和石钺逐渐从生产工具中分化出来,制作日益精美,有的器表还刻有纹饰,成为祭祀或是宗教活动中的仪式用品。本文以石铲和石钺为例对新石器时代生产工具中的仪式用斧现象略作探讨。     

Assessing the function of early hominin bone tools

Bone tools from early hominin sites in southern Africa continue to intrigue researchers interested in the development of early human technology and cognition. Sterkfontein, Swartkrans and Drimolen have all yielded bone tools dated to between 1 and 2 Mya associated with numerous Paranthropus robustus and few early Homo remains. The bone tools are described by different authors as implements used to excavate tubers from the ground and termites from their nests, work hides and strip bark from trees. The purpose of this research was to develop a more powerful analytical tool for the study and interpretation of bone surface modifications in general, and early hominin bone tool function(s) in particular. We used an optical interferometer to scan the worn areas of a sample of bone tools from Swartkrans and Drimolen, an ethnographic collection of implements used for defleshing marula fruits, and a set used experimentally to excavate in the ground and in termite mounds. The 3D rendering of archaeological and experimental wear patterns better highlights previously described differences between these patterns, and demonstrates the pertinence of this analytical tool to visually discriminating between different bone modifications. Analysis of selected 2D and 3D roughness variables indicates that the wear pattern on the early hominin bone tools from Drimolen is significantly different from that of tuber digging, very similar to termite foraging, and not unlike marula fruit processing. Marked differences are detected between the Swartkrans and Drimolen wear patterns, which suggests that the tools from these sites may have been used with different motions, in contact with abrasive particles of different size, or in different tasks. Principal component analyses conducted on 2D and 3D variables suggest that early hominin bone tools from southern Africa may have been used to forage for termites, extract tubers in a motion parallel to the tool main axis, process fruits and conduct other, as yet unidentified, tasks.     

The Analysis of Stone Tool Procurement, Production, and Maintenance

Researchers who analyze stone tools and their production debris have made significant progress in understanding the relationship between stone tools and human organizational strategies. Stone tools are understood to be morphologically dynamic throughout their use-lives; the ever-changing morphology of stone tools is intimately associated with the needs of tool users. It also has become apparent to researchers that interpretations of lithic analysis are more productive when the unique contexts and situations for which lithic artifacts were made, used, modified, and ultimately discarded are considered. This article reviews the recent literature on stone tool production with an emphasis on raw material procurement, manufacturing techniques, and tool maintenance processes as they relate to adaptive strategies of toolmakers and users.     

Demographic Continuities and Discontinuities in Neolithic Europe: Evidence, Methods and Implications

Observations of continuities and discontinuities in the archaeological record depend in important ways on the spatial and temporal scale at which we make the observations, which are in turn affected by the observational tools we have available. Nowhere is this more important than in matters of chronological resolution and its impact on our sense of stability and change. But theoretical considerations are also relevant and specific theoretical positions and observational tools tend to go together. A variety of new methods have made it possible to attain levels of chronological resolution not previously accessible and also to obtain information about aspects of past societies that were not previously available, such as the genetic make-up of their members. These developments have undermined the long-standing view in Anglo-American archaeology that change is gradual and autonomous and are leading to a view of the past that is much more dynamic. The implications of these new developments are examined in relation to the demographic patterns of the European Neolithic. It is argued that demographic fluctuations—‘boom-bust’ patterns—play a key role in accounting for patterns of cultural change over the course of the Neolithic and that a variety of methods can inform on them, including the use of summed radiocarbon probability distributions, which have the advantage that the information to construct them is very widely available. Given the speed with which demographic processes operate, it is important that the temporal resolution of our methods is sufficient to characterise the patterns that result from them. While the demographic patterns are becoming clearer, much more work needs to be done to understand the cultural, social and economic processes at work following regional collapse in populations, where this does not simply lead to reoccupation by new groups from elsewhere.     

Neanderthal Shell Tool Production: Evidence from Middle Palaeolithic Italy and Greece

The vast majority of tools recovered from Palaeolithic sites are made of stone varieties. Only rarely do non-lithic implements come to light, let alone tools produced on marine mollusc shell. Interestingly, a good number of shell implements made on Callista chione and Glycymeris sp. valves have been reported from 13 Middle Palaeolithic (Mousterian) sites in southern peninsular Europe. Of these, more than 300 specimens display evidence of deliberate edge retouch. They are all considered products of Neanderthals and date from ~110?ka BP to perhaps ~50?ka BP. In this paper, we review the evidence for Mousterian shell tool production in Italy and Greece??the only two countries in which such tools have been securely identified??and present experimental results obtained in the effort to understand the production process and typo-functional role(s) of the artefacts. We examine the general provisioning pattern of raw materials, as well as the typological, species-related and chronological data pertinent to the production of shell tools by Neanderthals. The data suggest that the Mousterian shell scrapers are a response to poor availability of lithic raw material in the areas of occurrence, and may be best described as an extension of chipped stone technologies to specific types of marine shell, their form defined by an existing mental template. As such, they constitute evidence for refined adaptation strategies and advanced provisioning of resources amongst Neanderthals, and may lend further support to the idea that these hominids displayed a degree of complex behaviour.     

Were Olduvai Hominins making butchering tools or battering tools? Analysis of a recently excavated lithic assemblage from BK (Bed II,Olduvai Gorge,Tanzania)

A new interpretation of early stone-tool use by hominins at Olduvai depicts them as involved in battering activities (using pounding tools) rather than making cutting butchering tools as is commonly inferred in most other Plio-Pleistocene sites where lithics appear associated to faunal remains. The bulk of this interpretation is based on the recognition of the stigma of percussion activities in anvils and detached by-products. Renewed excavations at BK after more than half a century of the beginning of the digging at the site by M. Leakey have produced a new and unbiased lithic assemblage. The taphonomic study of the faunal assemblage has shown that BK is an anthropogenic site where carcass butchery practices were repeatedly performed over a vast amount of time. The present analysis of the lithic artefacts supports this interpretation by showing that the obtainment of flakes was the principal aim in stone knapping. We argue that a number of technical traits observed in the lithic collection of BK can be best interpreted as the result of bipolar loading rather than the by-products of battering activities. Since BK has provided the second largest collection of hominid-modified bones from Olduvai, it is concluded that detached pieces produced in the course of bipolar reduction might have played an active role in bone modification and that active rather than passive percussion behaviors might have been responsible for the formation of the lithic assemblage. The functionality of the Oldowan stone tools are discussed under the light of the new study.     

Worked Human Femur from Gohar Tepe,Iran

A simple tool made from a gracile human femoral shaft was retrieved from a small animal bone assemblage found in a Late Bronze Age stratum at Gohar Tepe, Iran. The specimen has been identified as a chisel or gouge for which no analogous examples are known in the Near East. Studies examining similar tools from other regions suggest that such a tool may have been used for wood processing or pottery smoothing. Copyright © 2012 John Wiley & Sons, Ltd.     

Complementarities Between Universities and Technology Institutes: New Empirical Lessons and Perspectives

This paper investigates the different roles played by universities and technology institutes (TIs) as innovation partners of firms. Comparing the characteristics of Spanish firms collaborating with these agents allows us to better define complementarities among the target groups of these organizations. Our findings show that those firms collaborating with universities are bigger, have higher internal capabilities and are less dependent on their external relationships while firms collaborating with TIs are smaller, have weaker internal capabilities but are more open to their environment and thus more reliant on external sources. We point to the implications of these findings for regional development. Universities have a role as partners of more technologically advanced firms. TIs, on the other hand, partner those firms, which though also quite advanced, require more external help in their innovation processes. These results should help policy-makers in the definition of more complex regional strategies and the provision of tools aimed at different goals. Managers of universities, TIs and client firms should find these results of help in developing more positive collaborations with one another.     

Laboratory evidence of the use of metal tools at Machu Picchu (Peru) and environs

An interpretation of use-wear marks on metal artifacts is developed from the principles of metal cutting and brittle fracture and applied to surficial markings and microstructural damage on bronze tools from Machu Picchu and environs. Most of the tools have blunt edges, relatively low tin contents, and were not work hardened before use; they appear to have been designed for work that involved breaking chips from hard, brittle material. Use-wear marks on these tools are interpreted as due to sliding contacts and impacts with rock. One tool with a relatively sharp edge has a higher alloy content than those with blunt edges and has been work hardened; it appears to have been designed for cutting wood and use-wear markings suggest it was so used. A long bronze bar carries markings that suggest use by stonemasons. Many of the tools are broken and study of their microstructures shows that the bronze used has poor mechanical properties because of porosity and bands of sulphide inclusions.     

新疆地区史前人形雕像的发现与初步研究

新疆地区史前时期的墓葬中发现的人形雕像,大小不同,小的数十厘米,大的如真人,最大的高达3米,或直立或呈行走状,保存完好的人形雕像,身上还穿着衣服,佩带用具。这些人形雕像与生殖崇拜无关,它是当时人们灵魂的替代物,是早期萨满教中的神偶。     

Unpacking climate services: Knowledge politics,beneficent humanitarianism and the realpolitik of risk management in China

In the last four decades, climate services (CS) have moved from being limited forecasting tools in their predictive capacity to becoming involved in the shaping of risk assessment instruments with global reach affected to enhance adaptation to climate change. Yet, they have been relatively overlooked by human geographers and critical risk theorists, whose interests have been to document the political processes involved in shaping climate change and the global scientific enterprise it has generated. By looking at the ways in which CS have been developed and exported to countries deemed as climate-vulnerable, the paper sheds light on two simultaneous kinds of knowledge politics that are occurring at the interstices of global human security aspirations and the realpolitik of local practices. The first emerges from the ways in which CS political relevance has been secured by climate scientists in the midst of grand developmentalist and humanitarian ambitions, what we have called beneficent knowledge politics. The second comes from the nitty-gritty of risk management practices in countries to which CS are exported, in this case China, and highlights how a myriad of knowledge and sensitivities involved in shaping risk and science have been overlooked by the superseding ideals underpinning the production of CS and their application to wider climate adaptation agenda. By doing so, the paper contributes to the geographies of risk and emergencies as well as to the geographies of science by enhancing our understanding of the knowledge politics at play in the development of and resistance to technocratic climate governance.