Jebel Kareem (TH.68): Techno-typological characteristics of a distinctive lithic assemblage from Dhofar,southern Oman

The lithic sample from TH.68 in Southern Oman is characterised by a set of techno-typological features: (a) the variety of blank production strategies employed to produce flakes, blades and bladelets; (b) the level of standardisation of tools, including backed bladelets, end scrapers, burins on truncation, unifacial and bifacial plano-convex points, etc.; and (c) a previously unknown technique that produced specific flakes presenting uniform morphological traits and high incidence of retouch. Here a comprehensive account of the lithic production systems employed by prehistoric human bands and the formal retouched tools that they made is provided.     

Microwear Analysis of Retouched Glass Fragments from Fortlet Miñana,Azul, Argentina, 1860–1863

This paper presents the results of a microscopic analysis conducted on supposedly retouched glass fragments that were likely used as tools. The pieces were recovered in a series of excavations performed at the historical site of Fortlet Miñana (1860–1869), a military settlement used during the war against the Indians on the southern border of Buenos Aires province, Argentina. The use of glass as raw material in archaeological sites of the historic period has frequently been reported in the Pampas and Patagonian regions. In this paper we present a review of ethnohistoric and ethnographic sources concerning the use of glass side scrapers, end scrapers, and arrowheads by aboriginal groups throughout the world. In order to perform the analysis, the glass fragments from Fortlet Miñana were compared to a series of experimental pieces on which traces of deliberate use on two kinds of raw material, wood and hide, were identified. The experimental approach and the microscopic analysis demonstrate that the retouched glass fragments recovered at Fortlet Miñana were not used as tools. Therefore, we conclude that microscopic analysis is of significant use to all researchers working with materials of this kind.     

The elemental chemistry of lithic microwear: an experiment

This paper examines the ability of elemental analysis to distinguish microwear traces on stone tools. Our research hypothesised that cleaning procedures of experimental specimens may have heavily influenced previous studies in this area. Experimental flakes are used and cleaned by two alternative methods before laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) is applied to study use-wear chemistry. The results show that elementally recognisable traces remain on stone surfaces even with severe cleaning. Also studied were archaeological sickle blades from two sites in Northern England. The results were counter-intuitive demonstrating that experimentally validated models potentially require extensive modification and clarification before being applied to archaeological material. This research identifies methodological problems and errors concerning cleaning within previous experimental studies and highlights new directions for this quantitative analytic approach in microwear analysis.     

UNRETOUCHED BLADES IN THE LATE MESOLITHIC OF SOUTH SCANDINAVIA. A FUNCTIONAL STUDY

Summary. While most microwear analyses of flint artefacts have involved formal retouched tools, this paper concentrates on unretouched blades from 4 South Scandinavian Mesolithic sites, seeking to establish how frequently and on what materials such pieces were used and whether they were selected for identifiable morphological reasons. The results are based on a study of 496 specimens, from various archaeological contexts. The materials processed ranged from soft to medium hard and most blades were used once only, as disposable tools. Their role relates more to 'manufacturing'than 'subsistence'activities. Blades seem to have been selected mainly according to their edge angles, with specific tasks in mind (a situation for which ethnographic parallels can be quoted), and they were evidently deliberately struck with a view to use rather than being chosen from random débitage. Various aspects of these conclusions are discussed.     

Scanning electron microscopy of dry hide working tools: The role of abrasives and humidity in microwear polish formation

This paper presents the results of the scanning electron microscopy of a series of experimental tools designed to investigate the role of abrasive agents and humidity in microwear polish formation. The tools—35 end scrapers—were divided into four groups and used to work dry hide. It was found that both humidity and abrasive agents are two basic variables in the development of the microwear polish.     

Testing Area‐Scale Fractal Complexity (Asfc) and Laser Scanning Confocal Microscopy (LSCM) to Document and Discriminate Microwear on Experimental Quartzite Scrapers

Few microwear studies have been conducted on tools made from quartzite. Most rely on visual observation of microwear features using optical light microscopes and scanning electron microscopes. Quantification of microwear on quartzite tools is extremely rare, even though numerous methods to mathematically document surface roughness have been applied to other silicate tools. In this paper, laser scanning confocal microscopy (LSCM) was used to document surface roughness on four experimental scrapers made from two different subtypes of Mistassini quartzite that were used on either fresh or dry deer hide. Surface roughness data were analysed using area‐scale fractal complexity (Asfc). The results of this test case indicate that Asfc can effectively discriminate between the unused and used regions on the quartzite tools based on surface roughness, and that it can also discriminate between surface roughness produced by working dry versus fresh hides. Differences in the subtypes of Mistassini quartzite did affect surface roughness, but not significantly enough to prevent discrimination of the dry and fresh hide‐working tools. Although the use of the Asfc parameter for lithic microwear analysis requires further testing, these first results suggest it could be a reliable technique to mathematically document and discriminate wear patterns on archaeological quartzite tools.     

News and Commentary on the Illicit Traffic in Antiquities

Abstract

The results of a high-power microwear analysis of stone artifacts from the Magdalenian site at Verberie, France, are reported in this study. Both retouched and unretouched implements were examined, and the various use-wear traces that were found are briefly discussed. The relationship between tool morphology and function, the use of unmodified lithic artifacts, and microwear traces indicative of hafting are described. In addition, some hypotheses are advanced regarding specific activity areas at the site. It is concluded that the unretouched component of the lithic industry comprised a large part of the Magdalenian toolkit at Verberie.     

UNDER THE HAMMER: RESIDUES RESULTING FROM PRODUCTION AND MICROWEAR ON EXPERIMENTAL STONE TOOLS*

This paper presents the results of an experimental programme investigating the effects of production processes on stone tools and their interference with use‐related features. In the first part of the experimental programme, a series of flint flakes was retouched with different kinds of hammers in order to assess the extent and nature of percussion residues. After careful environmental scanning electron microscope (ESEM) observation and energy‐dispersive X‐ray (EDX) analysis, the retouched flakes were thoroughly cleaned and the underlying flint deformation was recorded. The second part of the experimental programme involved selecting several uncleaned retouched pieces for use in short woodworking, hide‐processing and butchery experiments. These pieces were observed and analysed before, during and after use. Some of the percussion features proved to be surprisingly resistant to use, and in some cases turned out to be strikingly similar in appearance to use‐generated features.     

河北昌黎渟泗涧细石器地点

<正> 淳泗涧细石器地点发现于1990年,91年10月,河北省文物研究所会同秦皇岛市文物管理处,昌黎县文物保管所对该地点进行了为期一个月的试掘。试掘面积25平方米,共发现400多件石制品,没有发现动物化石。 一、地理位置与地层 该地点位于昌黎县城东北2公里处,距其东南的淳泗涧村约0.5公里,地理坐标;E119°10′N39°44′,海拔65米。该地点背靠燕山余脉亮甲山,南为平原,京山铁路在地点南部穿过。其东南约14公里处即为渤海(图一)。 淳泗涧南为饮马河,东北为东沙河,两河向东注入渤海。地点附近的山前地带为饮马河的支流,支流两岸有两级阶地发育。二级阶地紧靠山脚,由于洪水冲刷以及山脚下基岩中泉水     

Insights from a tribological analysis of the tribulum

Since the 1980s, “strange” microwear traces were found to occur on flint blades from sites in the Near East from the late Neolithic and occurring in great abundance by the Early Bronze Age. Although these were considered by archaeologists to be sickles because they had visible gloss on their edges, their use-traces could not be reproduced in harvesting experiments carried out in the field. Subsequently, several lines of evidence were used to study the blades, including not only direct observation of microscopic wear traces, but also Near Eastern cuneiform texts from the third and second millennium BC describing agricultural instruments and analogy with ethnographic and experimental reference material. We found that these tools and their traces best matched traces on flint used to arm the underside of a tribulum (threshing sledge) for threshing grain and cutting straw. We built a replica of the tribulum described in cuneiform texts from the Bronze Age, using copies of the Bronze Age blades, and used this instrument in experiments.     

Laser scanning confocal microscopy: a potential technique for the study of lithic microwear

The key problem restricting lithic microwear analysis is the lack of quantitative analysis to support qualitative assessments of different wear traces. This paper presents the reflective laser scanning confocal microscope (LSCM) as a new technique for the study of lithic microwear that has the potential to resolve this problem. Firstly, an example is presented that shows how the LSCM compares with conventional reflected light microscopy and scanning electron microscopy. This shows that images, rivalling that of the SEM, can be produced in similar timescales to conventional photomicrography and with no need for casting or sample preparation. The LSCM is also used to measure surface roughness of use-wear produced from working hide (dry, fresh and greasy), woodworking and antler working. This analysis demonstrates clear differences between the different wear polishes and the potential of the LSCM as a quantitative approach in lithic microwear research.     

The Mousterian bone retouchers of Noisetier Cave: experimentation and identification of marks

Retouchers are fragments of bone used during the Paleolithic to strike stone flakes in order to transform them into retouched tools. Our experiments show that the mark produced on retouchers differs depending on whether they were used to strike flint or quartzite. Our results suggest that numerous pits, most often with an ovoid form, characterize the retouching of quartzite flakes. Most of the scores produced with this material have a sinuous morphology with rough interior faces. The areas with superposed traces have a pitted appearance. On the other hand, the retouching of flint flakes, produces pits that are most often triangular in form. Most of the scores have a rectilinear morphology with smooth interior faces and their superposition results in the formation of hatch marks. There is also a relationship between the characteristics of the mark and the relative state of freshness of the retouchers. The validity of the criteria identified was confirmed by a blind test. These diagnostic criteria were applied to archaeological retouchers from the Mousterian site of Noisetier Cave. The results obtained improve our knowledge of the technical behaviors of Neanderthals and allow us to address questions concerning their techno-economic implications.     

Wear Traces and the Interpretation of Stone Tools

Abstract

Hafting traces integrated within a larger functional analysis can be used to improve our understanding of the dynamic life cycle of a stone tool. Based on the analysis of hide scrapers from the Magdalenian site of Verberie, France, the potential of research that considers macroscopic and microscopic traces from different causes (e.g., production, use, manual grasping, and hafting) is demonstrated. Hafting traces can throw light on a tool’s use and hafting mode, but also on its morphology and reasons for discard, among other things. Most importantly, the principles necessary to analyze experimental hafting traces are shown to be useful for interpreting archaeological hafting modes.     

Testing the Efficiency of Simple Flakes,Retouched Flakes and Small Handaxes During Butchery

Handaxes, simple flakes and retouched flakes are three types of stone tools whose adaptive advantages are highly debated. Interpretations of these technologically different tools suggest that their adequacy for butchery is uneven. Although some experimentation has been made in this regard, further research is needed to understand which of these tool types are more efficient for butchery, thus granting adaptive advantages to the hominins who used them. The present experimental work shows that small handaxes provide higher return rates in butchery activities than simple and retouched flakes. Efficiency (measured in time) is significantly positive in handaxes compared to the other tools when defleshing. In contrast, when comparing the three stone tool sets (simple flakes, retouched flakes and handaxes), the return values obtained for disarticulation are very similar. This study also shows that cut marks do not occur randomly and are less stochastic than previously assumed. Defleshing leaves a preferential cluster of cut marks on mid‐shafts from long bones and even on these sections, depending on element type, patterns are statistically demonstrable.     

Slicing Cut Marks on Animal Bones: Diagnostics for Identifying Stone Tool Type and Raw Material

Abstract

Butchering implements leave identifying signatures on bones. From these signatures, it is possible to distinguish the different raw materials and types of chipped stone butchering tools. The results of recent experiments enable us to distinguish the different types of raw materials and tools used in the butchering process, in particular those implements that produce slicing cut marks. Three types of chipped stone tools (blades,flakes, and side scrapers) and raw materials (flint, obsidian, and quartzite), as well as issues relevant to lithic production and use were examined and tested. Silicone molds of cut marks produced by each of the instruments were made and subjected to analysis in light optical and scanning electron microscopes under various levels of magnification. The criteria used for distinguishing tool type, raw material, type of production and use characteristics of the respective cutting instruments are presented, as well as a discussion of the application of the experimental results to the Early Bronze Age I site of Afridar, Israel. The data from Afridar indicate that almost all of the butchering marks on animal bones from the site were made by stone tools, in particular haphazardly-made flakes.     

Analysis of DNA from Ethnoarchaeological Stone Scrapers

Analysis of DNA residues on stone tools provides a direct method of determining what the tools were used on. However, little is known about the taphonomy of DNA on tools. The discovery of present-day, stone-tool using hide workers in Ethiopia therefore provides a unique opportunity to study the survival and authenticity of DNA residues on stone tools. We collected stone scrapers from contexts ranging from excavated to confirmed use, as well as unused scrapers to test for the presence of DNA residues. We amplified segments of the mitochondrial genome with PCR to determine which animal species a tool was used on. We were able to recover authentic DNA from scrapers of known use and from a subset of excavated scrapers. We did, however, also obtain DNA unrelated to the use of the tools. Thus, caution must be used when interpreting results of DNA analysis of stone tools.     

A pottery workshop with flint tools on blades knapped with copper at Nausharo (Indus civilisation, ca. 2500 BC)

Twenty years after its discovery, the pottery workshop of Nausharo (province of Baluchistan, Pakistan), which yielded a series of knapped stone tools in association with unbaked sherds and clay waste, is still of unique importance in Asian protohistorical studies. The types of pottery production (sandy marl fabrics) identified in this workshop, which is dated to ca. 2500 BC, correspond to the majority of the domestic pottery discovered at the site during the first two phases of the Indus Civilisation. The flint blades discovered in the workshop were made from exotic flint, coming from zones close to the great Indus sites such as Mohenjo-Daro and Chanhu-Daro. This is also the origin of a small amount of the pottery (micaceous fabrics) found at Nausharo in domestic contexts, e.g. Black-Slipped-Jars. The butts of the blades display features characteristic of pressure detachment with a copper pressure point. Gloss and microwear traces (polish) testify to the blades' having been used for finishing the clay vessels: for actual finishing (trimming) while they were being turned on a wheel, and possibly also for scraping by hand. Both of these operations are distinctly attested to by the presence in the workshop of two different types of clay shavings.     

Taphonomic identification of cut marks made with lithic handaxes: an experimental study

Recent experimental studies have developed new diagnostic criteria to differentiate between trampling and cut marks. Within cut marks, these diagnostic criteria have been useful to differentiate between marks made with simple and retouched flakes. The present study expands the application of these criteria using a multivariate analysis to discriminate marks created with handaxes from those made with stone tool flakes. A discriminant analysis resulted in a selection of specific variables, which can successfully differentiate cut marks made with handaxes from those created with retouched flakes in more than 80% of occasions. The utility of this analogical taphonomic signature created by handaxes is discussed in the light of their potential value as butchering tools.