Pore pressure evolution and fluid flow during visco‐elastic single‐layer buckle folding

Pore pressure and fluid flow during the deformational history of geologic structures are directly influenced by tectonic deformation events. In this contribution, 2D plane strain finite element analysis is used to study the influence of different permeability distributions on the pore pressure field and associated flow regimes during the evolution of visco‐elastic single‐layer buckle folds. The buckling‐induced fluid flow regimes indicate that flow directions and, to a lesser degree, their magnitudes vary significantly throughout the deformation and as a function of the stratigraphic permeability distribution. The modelling results suggest that the volumetric strain and the permeability distribution significantly affect the resulting flow regime at different stages of fold development. For homogeneous permeability models (k > 10^?21 m²), low strain results in a mostly pervasive fluid flow regime and is in agreement with previous studies. For larger strain conditions, fluid focusing occurs in the buckling layer towards the top of the fold hinge. For low permeabilities (<10^?21 m²), local focused flow regimes inside the buckling layer emerge throughout the deformation history. For models featuring a low‐permeability layer embedded in a high‐permeability matrix or sandwiched between high‐permeability layers, focused flow regimes inside the folded layer result throughout the deformation history, but with significant differences in the flow vectors of the surrounding layers. Fluid flow vectors induced by the fold can result in different, even reversed, directions depending on the amount of strain. In summary, fluid flow regimes during single‐layer buckling can change from pervasive to focused and fluid flow vectors can be opposite at different strain levels, that is the flow vectors change significantly through time. Thus, a complete understanding of fluid flow regimes associated with single‐layer buckle folds requires consideration of the complete deformation history of the fold.     

Fracture spacing during hydro‐fracturing of cap‐rocks

Layered low permeability rock units, like shales, represent seals or ‘cap‐rocks’ in a variety of geological settings. A continuous increase in the fluid pressure gradients across a virtually impermeable rock layer will ultimately lead to hydro‐fracturing. Depending on the boundary conditions, such fracturing may lead to the formation of a set of sub‐parallel cracks oriented more or less perpendicular to the cap‐rock layer. In this article, we propose a new numerical model that describes interactions between multiple cross‐cutting fractures in an elastic low permeability rock layer. The width of each fracture and the spacing between them are modeled as a force balance between the fluid pressure and the elastic forces in the cap‐rock and between each fracture. The model indicates that the system of fractures evolves toward a spatially periodic steady‐state distribution with a fixed fracture spacing and aperture. The results are similar for incompressible and compressible fluids. The steady‐state conditions depend on only two dimensionless parameters, and the fracture spacing is only weakly dependent on the cap‐rock thickness. This is in contrast to fracturing produced by simple extension of an elastic rock layer beyond the fracture strength, in which case fracture spacing is proportional to layer thickness.     

Spatial coupling between spilitization and carbonation of basaltic sills in SW Scottish Highlands: evidence of a mineralogical control of metamorphic fluid flow

In a geochemical and petrological analysis of overprinting episodes of fluid–rock interaction in a well‐studied metabasaltic sill in the SW Scottish Highlands, we show that syn‐deformational access of metamorphic fluids and consequent fluid–rock interaction is at least in part controlled by preexisting mineralogical variations. Lithological and structural channelling of metamorphic fluids along the axis of the Ardrishaig Anticline, SW Scottish Highlands, caused carbonation of metabasaltic sills hosted by metasedimentary rocks of the Argyll Group in the Dalradian Supergroup. Analysis of chemical and mineralogical variability across a metabasaltic sill at Port Cill Maluaig shows that carbonation at greenschist to epidote–amphibolites facies conditions caused by infiltration of H₂O‐CO₂ fluids was controlled by mineralogical variations, which were present before carbonation occurred. This variability probably reflects chemical and mineralogical changes imparted on the sill during premetamorphic spilitization. Calculation of precarbonation mineral modes reveals heterogeneous spatial distributions of epidote, amphibole, chlorite and epidote. This reflects both premetamorphic spilitization and prograde greenschist facies metamorphism prior to fluid flow. Spilitization caused albitization of primary plagioclase and spatially heterogeneous growth of epidote ± calcic amphibole ± chlorite ± quartz ± calcite. Greenschist facies metamorphism caused breakdown of primary pyroxene and continued, but spatially more homogeneous, growth of amphibole + chlorite ± quartz. These processes formed diffuse epidote‐rich patches or semi‐continuous layers. These might represent precursors of epidote segregations, which are better developed elsewhere in the SW Scottish Highlands. Chemical and field analyses of epidote reveal the evidence of local volume fluctuations associated with these concentrations of epidote. Transient permeability enhancement associated with these changes may have permitted higher fluid fluxes and therefore more extensive carbonation. This deflected metamorphic fluid such that its flow direction became more layer parallel, limiting propagation of the reaction front into the sill interior.     

Deformation bands and their impact on fluid flow in sandstone reservoirs: the role of natural thickness variations

Cataclastic deformation bands, which are common in sandstone reservoirs and which may negatively affect fluid flow, are generally associated with notable thickness variations. It has been suggested previously that such thickness variations represent an important control on how deformation bands affect fluid flow. The effects of such thickness variations are tested in this study though statistical analysis and fluid flow simulation of an array of cataclastic deformation bands in Cretaceous sandstones in in the Bassin de Sud‐Est in Provence, France. Spatial outcrop data are statistically analyzed for incorporation in flow simulation models, and numerical simulations are used to investigate the effects of notable thickness variations on how the deformation bands influence effective permeability and flow dynamics. A suite of simulations is performed using a combination of fine‐scale and coarse‐scale grids, revealing that the effective permeability of the simulated reservoir is reduced by a factor of 15–25. More interestingly, the simulations further demonstrated that, as compared to the overall effect of the deformation band array on fluid flow, thickness variations along the bands proved to have negligible effects only. Thus, our simulations indicate that the configuration and connectivity of the deformation bands, together with the permeability contrast between the bands and the host rock and the mean band thickness, are the most important controls on the effective permeability. Our findings represent new insight into the influence of deformation bands on fluid flow in subsurface aquifers and reservoirs, indicating that thickness variations of individual deformation bands are of less significance than previously thought.     

Physical properties of carbonate fault rocks,fucino basin (Central Italy): implications for fault seal in platform carbonates

We documented the porosity, permeability, pore geometry, pore type, textural anisotropy, and capillary pressure of carbonate rock samples collected along basin‐bounding normal faults in central Italy. The study samples consist of one Mesozoic platform carbonate host rock with low porosity and permeability, four fractured host rocks of the damage zones, and four fault rocks of the fault cores. The four fractured samples have high secondary porosity, due to elongated, connected, soft pores that provide fluid pathways in the damage zone. We modeled this zone as an elastic cracked medium, and used the Budiansky–O'Connell correlation to compute its permeability from the measured elastic moduli. This correlation can be applied only to fractured rocks with large secondary porosity and high‐aspect ratio pores. The four fault rock samples are made up of survivor clasts embedded in fine carbonate matrices and cements with sub‐spherical, stiff pores. The low porosity and permeability of these rocks, and their high values of capillary pressure, are consistent with the fault core sealing as much as 77 and 140 m of gas and oil columns, respectively. We modeled the fault core as a granular medium, and used the Kozeny–Carmen correlation, assigning the value of 5 to the Kozeny constant, to compute its permeability from the measured porosities and pore radii. The permeability structure of the normal faults is composed of two main units with unique hydraulic characteristics: a granular fault core that acts as a seal to cross‐fault fluid flow, and an elastic cracked damage zone that surrounds the core and forms a conduit for fluid flow. Transient pathways for along‐fault fluid flow may form in the fault core during seismic faulting due to the formation of opening‐mode fractures within the cemented fault rocks.     

A vector of high‐temperature paleo‐fluid flow deduced from mass transfer across permeability barriers (quartz veins)

Quartz veins acted as impermeable barriers to regional fluid flow and not as fluid‐flow conduits in Mesoproterozoic rocks of the Mt Painter Block, South Australia. Systematically distributed asymmetric alteration selvedges consisting of a muscovite‐rich zone paired with a biotite‐rich zone are centered on quartz veins in quartz–muscovite–biotite schist. Geometric analysis of the orientation and facing of 126 veins at Nooldoonooldoona Waterhole reveals a single direction along which a maximum of all veins have a muscovite‐rich side, irrespective of their specific individual orientation. This direction represents a Mesoproterozoic fluid‐flow vector and the veins represent permeability barriers to the flow. The pale muscovite‐rich zones formed on the downstream side of the vein and the dark biotite‐rich zones mark the upstream side. The alteration couplets formed from mica schist at constant Zr, Ga, Sc, and involved increases in Si, Na, Al and decreases in K, Fe, Mg for pale alteration zones, and inverse alteration within dark zones. The asymmetry of the alteration couplets is best explained by the pressure dependence of mineral–fluid equilibria. These equilibria, in combination with a Darcian flow model for coupled advection and diffusion, and with permeability barriers imposed by the quartz veins, simulate the pattern of both fluid flow and differential, asymmetric metasomatism. The determined vector of fluid flow lies along the regional foliation and is consistent with the known distribution of regional alteration products. The presence of asymmetric alteration zones in rock containing abundant pre‐alteration veins suggests that vein‐rich material may have generally retarded regional fluid flow.     

Effects of episodic fluid flow on hydrocarbon migration in the Newport‐Inglewood Fault Zone,Southern California

Fault permeability may vary through time due to tectonic deformations, transients in pore pressure and effective stress, and mineralization associated with water‐rock reactions. Time‐varying permeability will affect subsurface fluid migration rates and patterns of petroleum accumulation in densely faulted sedimentary basins such as those associated with the borderland basins of Southern California. This study explores the petroleum fluid dynamics of this migration. As a multiphase flow and petroleum migration case study on the role of faults, computational models for both episodic and continuous hydrocarbon migration are constructed to investigate large‐scale fluid flow and petroleum accumulation along a northern section of the Newport‐Inglewood fault zone in the Los Angeles basin, Southern California. The numerical code solves the governing equations for oil, water, and heat transport in heterogeneous and anisotropic geologic cross sections but neglects flow in the third dimension for practical applications. Our numerical results suggest that fault permeability and fluid pressure fluctuations are crucial factors for distributing hydrocarbon accumulations associated with fault zones, and they also play important roles in controlling the geologic timing for reservoir filling. Episodic flow appears to enhance hydrocarbon accumulation more strongly by enabling stepwise build‐up in oil saturation in adjacent sedimentary formations due to temporally high pore pressure and high permeability caused by periodic fault rupture. Under assumptions that fault permeability fluctuate within the range of 1–1000 millidarcys (10^?15–10^?12 m²) and fault pressures fluctuate within 10–80% of overpressure ratio, the estimated oil volume in the Inglewood oil field (approximately 450 million barrels oil equivalent) can be accumulated in about 24 000 years, assuming a seismically induced fluid flow event occurs every 2000 years. This episodic petroleum migration model could be more geologically important than a continuous‐flow model, when considering the observed patterns of hydrocarbons and seismically active tectonic setting of the Los Angeles basin.     

The upper continental crust, an aquifer and its fluid: hydaulic and chemical data from 4 km depth in fractured crystalline basement rocks at the KTB test site

Detailed information on the hydrogeologic and hydraulic properties of the deeper parts of the upper continental crust is scarce. The pilot hole of the deep research drillhole (KTB) in crystalline basement of central Germany provided access to the crust for an exceptional pumping experiment of 1‐year duration. The hydraulic properties of fractured crystalline rocks at 4 km depth were derived from the well test and a total of 23100 m³ of saline fluid was pumped from the crustal reservoir. The experiment shows that the water‐saturated fracture pore space of the brittle upper crust is highly connected, hence, the continental upper crust is an aquifer. The pressure–time data from the well tests showed three distinct flow periods: the first period relates to wellbore storage and skin effects, the second flow period shows the typical characteristics of the homogeneous isotropic basement rock aquifer and the third flow period relates to the influence of a distant hydraulic border, probably an effect of the Franconian lineament, a steep dipping major thrust fault known from surface geology. The data analysis provided a transmissivity of the pumped aquifer T = 6.1 × 10^?6 m² sec^?1, the corresponding hydraulic conductivity (permeability) is K = 4.07 × 10^?8 m sec^?1 and the computed storage coefficient (storativity) of the aquifer of about S = 5 × 10^?6. This unexpected high permeability of the continental upper crust is well within the conditions of possible advective flow. The average flow porosity of the fractured basement aquifer is 0.6–0.7% and this range can be taken as a representative and characteristic values for the continental upper crust in general. The chemical composition of the pumped fluid was nearly constant during the 1‐year test. The total of dissolved solids amounts to 62 g l^?1 and comprise mainly a mixture of CaCl₂ and NaCl; all other dissolved components amount to about 2 g l^?1. The cation proportions of the fluid (X_Ca approximately 0.6) reflects the mineralogical composition of the reservoir rock and the high salinity results from desiccation (H₂O‐loss) due to the formation of abundant hydrate minerals during water–rock interaction. The constant fluid composition suggests that the fluid has been pumped from a rather homogeneous reservoir lithology dominated by metagabbros and amphibolites containing abundant Ca‐rich plagioclase.     

Quantifying secondary migration efficiencies

Exploration success relies on properly risking the hydrocarbon system relevant for each prospect. Accurate risking of secondary migration efficiencies has been difficult due to lack of simple procedures that relate rock properties such as permeability and entry pressures to migration velocities, oil stringer heights and saturations. In order to achieve improved estimates of charge probabilities, equations for the secondary migration process are formulated based upon the Darcy flow and buoyancy conditions. An analytical solution of the formulated equations is shown, making it possible to construct charts for efficiently assessing the column height of secondary migration hydrocarbon stringers. The average oil (hydrocarbon) saturation of the migrating stringer can be computed, making it easy to compute the permeability related, secondary migration losses. Inputs to the chart are hydrocarbon flow‐rates and flow‐path width, hydrocarbon viscosity and density, carrier bed dip, permeability and entry pressures. Outputs are stringer heights, hydrocarbon saturation, relative permeability, migration velocities and migration losses. A procedure for including the new equations into existing basin scale fluid flow simulators is outlined and a Java applet for calculating the properties is described. The Java applet is useful for sensitivity studies, and can also be used to test results from basin simulators with the new migration efficiency equations. The analytical solution suggests that many published methods for calculating hydrocarbon migration in fluid flow simulators will over‐estimate hydrocarbon saturations and therefore losses. Calculated migration velocities will also be too low.     

Stress‐dependent transport properties of fractured arkosic sandstone

We measure the fluid transport properties of microfractures and macrofractures in low‐porosity polyphase sandstone and investigate the controls of in situ stress state on fluid flow conduits in fractured rock. For this study, the permeability and porosity of the Punchbowl Formation sandstone, a hydrothermally altered arkosic sandstone, were measured and mapped in stress space under intact, microfractured, and macrofractured deformation states. In contrast to crystalline and other sedimentary rocks, the distributed intragranular and grain‐boundary microfracturing that precedes macroscopic fracture formation has little effect on the fluid transport properties. The permeability and porosity of microfractured and intact sandstone depend strongly on mean stress and are relatively insensitive to differential stress and proximity to the frictional sliding envelope. Porosity variations occur by elastic pore closure with intergranular sliding and pore collapse caused by microfracturing along weakly cemented grain contacts. The macroscopic fractured samples are best described as a two‐component system consisting (i) a tabular fracture with a 0.5‐mm‐thick gouge zone bounded by 1 mm thick zones of concentrated transgranular and intragranular microfractures and (ii) damaged sandstone. Using bulk porosity and permeability measurements and finite element methods models, we show that the tabular fracture is at least two orders of magnitude more permeable than the host rock at mean stresses up to 90 MPa. Further, we show that the tabular fracture zone dilates as the stress state approaches the friction envelope resulting in up to a three order of magnitude increase in fracture permeability. These results indicate that the enhanced and stress‐sensitive permeability in fault damage zones and sedimentary basins composed of arkosic sandstones will be controlled by the distribution of macroscopic fractures rather than microfractures.     

Evaluation of recoverable energy potential from enhanced geothermal systems: a sensitivity analysis in a poro‐thermo‐elastic framework

This study presents application of an efficient approach to simulate fluid flow and heat transfer in naturally fractured geothermal reservoirs. Fluid flow is simulated by combining single continuum and discrete fracture approaches. The local thermal nonequilibrium approach is used to simulate heat transfer by conduction in the rock matrix and convection (including conduction) in the fluid. Fluid flow and heat transfer models are integrated within a coupled poro‐thermo‐elastic framework. The developed model is used to evaluate the long‐term response of a geothermal reservoir with specific boundary conditions and injection/production schedule. A comparative study and a sensitivity analysis are carried out to evaluate the capability of the integrated approach and understand the degree by which different reservoir parameters affect thermal depletion of Soultz geothermal reservoir, respectively. Also observed, there exists an optimum fracture permeability after which the reservoir stimulation does not change the recovery factor significantly. Estimation of fluid temperature by the assumption of local thermal nonequilibrium heat transfer between the fracture fluid and the rock matrix gives fluid temperature of about 3°C less than that of estimated by thermal equilibrium heat transfer at early stage of hot water production.     

Carbon dioxide controlled earthquake distribution pattern in the NW Bohemian swarm earthquake region,western Eger Rift,Czech Republic – gas migration in the crystalline basement

The ascent of magmatic carbon dioxide in the western Eger (Oh?e) Rift is interlinked with the fault systems of the Variscian basement. In the Cheb Basin, the minimum CO₂ flux is about 160 m³ h^?1, with a diminishing trend towards the north and ceasing in the main epicentral area of the Northwest Bohemian swarm earthquakes. The ascending CO₂ forms Ca‐Mg‐HCO₃ type waters by leaching of cations from the fault planes and creates clay minerals, such as kaolinite, as alteration products on affected fault planes. These mineral reactions result in fault weakness and in hydraulically interconnected fault network. This leads to a decrease in the friction coefficient of the Coulomb failure stress (CFS) and to fault creep as stress build‐up cannot occur in the weak segments. At the transition zone in the north of the Cheb Basin, between areas of weak, fluid conductive faults and areas of locked faults with frictional strength, fluid pressure can increase resulting in stress build‐up. This can trigger strike‐slip swarm earthquakes. Fault creep or movements in weak segments may support a stress build‐up in the transition area by transmitting fluid pressure pulses. Additionally to fluid‐driven triggering models, it is important to consider that fluids ascending along faults are CO₂‐supersaturated thus intensifying the effect of fluid flow. The enforced flow of CO₂‐supersaturated fluids in the transitional zone from high to low permeability segments through narrowings triggers gas exsolution and may generate pressure fluctuations. Phase separation starts according to the phase behaviour of CO₂‐H₂O systems in the seismically active depths of NW Bohemia and may explain the vertical distribution of the seismicity. Changes in the size of the fluid transport channels in the fault systems caused, or superimposed, by fault movements, can produce fluid pressure increases or pulses, which are the precondition for triggering fluid‐induced swarm earthquakes.     

Mechanisms of strain-rate- and reaction-dependent permeability in the mid-crust of the Southern Alps: insight from three-dimensional mechanical models

We used three-dimensional mechanical modelling to explore the interplay of rheology, modes of permeability creation and fluid flow in the mid-crust of an oblique orogen. We used the central Southern Alps and the Otago Schist of New Zealand to constrain our models. We also compared our models with the magnetotelluric survey along the Rangitata–Whataroa rivers that imaged a U-shaped zone of high conductivity, interpreted as interconnected fluids, beneath the central Southern Alps. Modelling was carried out using the numerical code FLAC^3D. We used a number of simple assumptions: an initially homogeneous starting material, deformation boundary conditions based on the tectonics of the South Island, the capability of the modelled material to develop an anisotropic permeability structure, strain rate and reaction-induced permeability increases, initial saturation and lithostatic pore pressures as a basis for our models. The initial isotropic permeability was 10⁻¹⁸ m². We modelled two possible mechanisms of permeability increase: (i) strain-rate dependent and (ii) reaction dependent. For a strong mid-crust, the models showed enhanced permeability and hence fluid interconnectivity in a symmetric region beneath the model main divide, both ends were turned up towards the brittle–ductile transition and fluid flow was the greatest in the across strike direction. For a weak mid-crust, the region of enhanced permeability was asymmetric and turned up towards the brittle–ductile regime close to the Alpine Fault. The strong mid-crust model reproduces the features that are common to all interpretations of the MT soundings and is our preferred model for the central Southern Alps.     

Computing geochemical mass transfer and water/rock ratios in submarine hydrothermal systems: implications for estimating the vigour of convection

A method of calculating chemical water/rock ratios is presented that enables the estimation of fluid velocities in open, flow‐through hydrologic systems. The approach is based on relating the gain/loss of a chemical species per kilogram of solid phase to the loss/gain of that species in the fluid phase, integrated across a specified length of the flowpath. After examining the underlying approximations of the approach using a one‐dimensional model of seawater moving through a basalt under nonisothermal conditions, the method is applied to representative zones within a two‐dimensional hydrothermal convective system. The method requires that regions within the flow system can be identified in which the direction of flow is steady for an extended period of time. Estimates of fluid velocity are spatial and temporal averages for the length of the flowpath used in the calculation. The location within the flow system and the nature of the alteration reactions determine which species can provide reliable values of the chemical water/rock ratio and useful estimates of fluid velocities. Over the length of the flowpath considered, the calculation of water/rock ratios works best when a species is controlled by a single reaction. Accurate estimates are favoured if the concentration profile of a species along the flowpath increases or decreases monotonically. If the length of the flowpath extends over more than one reaction zone, then erroneous estimates of the water/rock ratio and fluid velocity are more likely. Model calculations suggest that the quartz/silica system should provide reliable estimates for fluid velocity under a wide range of temperature and flow conditions, in particular in those regions of a system at or near quartz equilibrium, so that the aqueous silica concentration is buffered by quartz and correlated with the temperature distribution.     

The relevance of vein texture in understanding the past hydraulic behaviour of a crystalline rock mass: reconstruction of the palaeohydrology of the Mecsekalja Zone,south Hungary

This study reconstructs the palaeohydrogeologic evolution of the shallow‐to‐moderate Mesozoic subsidence history for the Mecsekalja Zone (MZ), a narrow metamorphic belt in the eastern Mecsek Mountains, Hungary. Brittle deformation of the MZ produced a vein system with a cement history consisting of five sequential carbonate generations and one quartz phase. Vein textures suggest different fluid‐flow mechanisms for the parent fluids of subsequent cement generations. Combined microthermometric and stable‐isotope measurements permit reconstruction of the character of subsequent fluid generations with different flow types, as defined by vein textures, yielding new information regarding the hydraulic behaviour of a metamorphic crystalline complex. Textural observations and geochemical data suggest that fracture‐controlled flow pathways and externally derived fluids were typical of some flow events, while percolation through the rock matrix and the relationship to the Cretaceous volcanism and dyke emplacement were typical of others. The difference in the mode of calcite deposition from pervasive fluids (i.e. pervasive carbonatisation along grain boundaries versus deposition in antitaxial veins) between two calcite generations related to the volcanism inspired a stress‐dependent model of antitaxial vein growth. Textural and isotope variations in a vein generation produced by the same parent fluid indicate rock‐dependent hydraulic behaviour for different rock types, distinct action of the contemporaneous fracture systems and different extents of fluid–rock interaction. Cathodoluminescence microscopy and fluid‐inclusion microthermometry shed light on the possible role of hydraulic fracturing in the formation of massive calcite. The time of formation was estimated from the isotope composition of the oldest calcite generation and its presumptive relationship with the sedimentary sequences to the north, whereas microthermometry permitted conciliation of the reconstructed flow sequence with the Mesozoic subsidence history of the Mórágy Block (including the MZ).     

Interpretation of observed fluid potential patterns in a deep sedimentary basin under tectonic compression: Hungarian Great Plain, Pannonian Basin

The ≈ 40 000 km² Hungarian Great Plain portion of the Pannonian Basin consists of a basin fill of 100 m to more than 7000 m thick semi‐ to unconsolidated marine, deltaic, lacustrine and fluviatile clastic sediments of Neogene age, resting on a strongly tectonized Pre‐Neogene basement of horst‐and‐graben topography of a relief in excess of 5000 m. The basement is built of a great variety of brittle rocks, including flysch, carbonates and metamorphics. The relatively continuous Endr?d Aquitard, with a permeability of less than 1 md (10^?15 m²) and a depth varying between 500 and 5000 m, divides the basin's rock framework into upper and lower sequences of highly permeable rock units, whose permeabilities range from a few tens to several thousands of millidarcy. Subsurface fluid potential and flow fields were inferred from 16 192 water level and pore pressure measurements using three methods of representation: pressure–elevation profiles; hydraulic head maps; and hydraulic cross‐sections. Pressure–elevation profiles were constructed for eight areas. Typically, they start from the surface with a straight‐line segment of a hydrostatic gradient (γ_st = 9.8067 MPa km^?1) and extend to depths of 1400–2500 m. At high surface elevations, the gradient is slightly smaller than hydrostatic, while at low elevations it is slightly greater. At greater depths, both the pressures and their vertical gradients are uniformly superhydrostatic. The transition to the overpressured depths may be gradual, with a gradient of γ_dyn = 10–15 MPa km^?1 over a vertical distance of 400–1000 m, or abrupt, with a pressure jump of up to 10 MPa km^?1 over less than 100 m and a gradient of γ_dyn > 20 MPa km^?1. According to the hydraulic head maps for 13 100–500 m thick horizontal slices of the rock framework, the fluid potential in the near‐surface domains declines with depth beneath positive topographic features, but it increases beneath depressions. The approximate boundary between these hydraulically contrasting regions is the 100 m elevation contour line in the Duna–Tisza interfluve, and the 100–110 m contours in the Nyírség uplands. Below depths of ≈ 600 m, islets of superhydrostatic heads develop which grow in number, areal extent and height as the depth increases; hydraulic heads may exceed 3000 m locally. A hydraulic head ‘escarpment’ appears gradually in the elevation range of ? 1000 to ? 2800 m along an arcuate line which tracks a major regional fault zone striking NE–SW: heads drop stepwise by several hundred metres, at places 2000 m, from its north and west sides to the south and east. The escarpment forms a ‘fluid potential bank’ between a ‘fluid potential highland’ (500–2500 m) to the north and west, and a ‘fluid potential basin’ (100–500 m) to the south and east. A ‘potential island’ rises 1000 m high above this basin further south. According to four vertical hydraulic sections, groundwater flow is controlled by the topography in the upper 200–1700 m of the basin; the driving force is orientated downwards beneath the highlands and upwards beneath the lowlands. However, it is directed uniformly upwards at greater depths. The transition between the two regimes may be gradual or abrupt, as indicated by wide or dense spacing of the hydraulic head contours, respectively. Pressure ‘plumes’ or ‘ridges’ may protrude to shallow depths along faults originating in the basement. The basement horsts appear to be overpressured relative to the intervening grabens. The principal thesis of this paper is that the two main driving forces of fluid flow in the basin are gravitation, due to elevation differences of the topographic relief, and tectonic compression. The flow field is unconfined in the gravitational regime, whereas it is confined in the compressional regime. The nature and geometry of the fluid potential field between the two regimes are controlled by the sedimentary and structural features of the rock units in that domain, characterized by highly permeable and localized sedimentary windows, conductive faults and fracture zones. The transition between the two potential fields can be gradual or abrupt in the vertical, and island‐like or ridge‐like in plan view. The depth of the boundary zone can vary between 400 and 2000 m. Recharge to the gravitational regime is inferred to occur from infiltrating precipitation water, whereas that to the confined regime is from pore volume reduction due to the basement's tectonic compression.     

Salt tectonics and shallow subseafloor fluid convection: models of coupled fluid‐heat‐salt transport

Thermohaline convection associated with salt domes has the potential to drive significant fluid flow and mass and heat transport in continental margins, but previous studies of fluid flow associated with salt structures have focused on continental settings or deep flow systems of importance to petroleum exploration. Motivated by recent geophysical and geochemical observations that suggest a convective pattern to near‐seafloor pore fluid flow in the northern Gulf of Mexico (GoMex), we devise numerical models that fully couple thermal and chemical processes to quantify the effects of salt geometry and seafloor relief on fluid flow beneath the seafloor. Steady‐state models that ignore halite dissolution demonstrate that seafloor relief plays an important role in the evolution of shallow geothermal convection cells and that salt at depth can contribute a thermal component to this convection. The inclusion of faults causes significant, but highly localized, increases in flow rates at seafloor discharge zones. Transient models that include halite dissolution show the evolution of flow during brine formation from early salt‐driven convection to later geothermal convection, characteristics of which are controlled by the interplay of seafloor relief and salt geometry. Predicted flow rates are on the order of a few millimeters per year or less for homogeneous sediments with a permeability of 10^?15 m², comparable to compaction‐driven flow rates. Sediment permeabilities likely fall below 10^?15 m² at depth in the GoMex basin, but such thermohaline convection can drive pervasive mass transport across the seafloor, affecting sediment diagenesis in shallow sediments. In more permeable settings, such flow could affect methane hydrate stability, seafloor chemosynthetic communities, and the longevity of fluid seeps.     

Upper crustal fluid flow in the outboard region of the Southern Alps,New Zealand

The currently active fluid regime within the outboard region of the Southern Alps, New Zealand was investigated using a combination of field observations, carbon‐ and oxygen‐stable isotopes from fault‐hosted calcites and interpretation of magnetotelluric (MT) data. Active faulting in the region is dominated by NE striking and N striking, oppositely dipping thrust fault pairs. Stable isotopic analyses of calcites hosted within these fault zones range from 10 to 25‰δ¹⁸O and from ?33 to 0‰δ¹³C. These values reflect mixing of three parent fluids: meteoric water, carbon‐exchanged groundwater and minor deeper rock‐exchanged fluids, at temperatures of 10–90°C in the upper 3–4 km of the crust. A broad, ‘U‐shaped’ zone of high electrical conductivity (maximum depth c. 28 km) underlies the central Southern Alps. In the ductile region of the crust, the high‐conductivity zone is subhorizontal. Near‐vertical zones of high conductivity extend upward to the surface on both sides of the conductive zone. On the outboard side of the orogen, the conductive zone reaches the surface coincident with the trace of the active Forest Creek Faults. Near‐surface flow is shown to dominate the outboard region. Topographically driven meteoric water interacts, on a kilometre scale, with either carbon‐exchanged groundwater or directly with organic material within Pliocene gravels, resulting in a distinctive low ¹³C signal within fault‐hosted calcites of the outboard region. The high‐strain zone in the lower crust focuses the migration of deeply sourced fluids upward to the base of the brittle–ductile transition. Interconnected fluid is imaged as a narrow vertical zone of high conductivity in the upper crust, implying continuous permeability and possibly buoyancy‐driven flow of deeply sourced fluids to higher levels of the crust where they are detected by the isotopic analysis of the fault‐hosted calcites.     

Comparing closed system, flow-through and fluid infiltration geochemical modelling: examples from K-alteration in the Ernest Henry Fe-oxide–Cu–Au system

Potassic alteration of rocks adjacent to, and within the Ernest Henry Fe‐oxide–Cu–Au deposit is used here as a test case to investigate fluid–rock interactions using various equilibrium dynamic geochemical modelling approaches available in the HCh code. Reaction of a simple K–Fe–(Na,Ca) brine (constrained by published fluid inclusion analysis) with an albite‐bearing felsic volcanic rock, resulted in predicted assemblages defined by (i) K‐feldspar–muscovite–magnetite, (ii) biotite–K‐feldspar–magnetite, (iii) biotite–quartz–albite and (iv) albite–biotite–actinolite–pyroxene with increasing rock buffering (decreasing log w/r). Models for isothermal–isobaric conditions (450°C and 2500 bars) were compared with models run over a T–P gradient (450 to 200°C and 2500 to 500 bars). Three principal equilibrium dynamic simulation methods have been used: (i) static closed system, where individual steps are independent of all others, (ii) flow‐through and flush, where a part of the result is passed as input further along the flow line, and (iii) fluid infiltration models that simulate fluid moving through a rock column. Each type is best suited to a specific geological fluid–rock scenario, with increasing complexity, computation requirements and approximation to different parts of the natural system. Static closed system models can be used to quickly ascertain the broad alteration assemblages related to changes in the water/rock ratio, while flow‐through models are better suited to simulating outflow of reacted fluid into fresh rock. The fluid infiltration model can be used to simulate spatially controlled fluid metasomatism of rock, and we show that, given assumptions of porosity relationships and spatial dimensions, this model is a first‐order approximation to full reactive transport, without requiring significant computational time. This work presents an overview of the current state of equilibrium dynamic modelling technology using the HCh code with a view to applying these techniques to predictive modelling in exploration for mineral deposits. Application to the Ernest Henry Fe‐oxide–Cu–Au deposit demonstrates that isothermal fluid–rock reaction can account for some of the alteration zonation around the deposit.