Use-wear analysis of obsidian artifacts from Later Stone Age shell midden sites on the Red Sea Coast of Eritrea,with experimental results

This paper presents results of use-wear study on lithic artifacts from two Later Stone Age sites (Gelalo and Misse) on the Red Sea Coast of Eritrea. The sites produced large quantities of lithic artifacts in association with mollusk shells and ostrich eggshell beads, but it is unclear if all the stone tools were required for bead and mollusk shell processing. The study involved recording of microfracture damage traces in order to infer the use-material and the manner in which the artifacts were used. A large percentage of the analyzed samples from Gelalo and Misse preserve wear patterns suggestive of human use. The diagnostic wear types include: (1) dense step, snap (crushing) and hinge fractures typically confined on the working edges, and (2) feather scars organized in a scalar manner visible on the ventral and dorsal surfaces of the active parts. The observed damage patterns suggest cutting and engraving medium to hard materials. The evidence is incomplete for more generalization about the specific activities carried out at the sites. A brief experimental study involving ostrich eggshell drilling, oak twig sawing and bark scraping, meat slicing, and mollusk shell sawing and drilling was carried out to aid interpretation of wear features observed on the archaeological specimens. Wear traces produced by sawing mollusk shell and oak wood showed close affinity to those observed on the archaeological specimens. The study contributes important information about early Holocene site use on the Red Sea Coast of Eritrea. The close association of used lithic artifacts, symbolic objects (beads) and broken shell remains indicates that the sites were habitation areas.     

Evaluating morphological variability in lithic assemblages using 3D models of stone artifacts

Technological and morphological variability in lithic artifacts is commonly used to identify taxonomic entities in Paleolithic research contexts. Assemblages are mainly studied using either linear distance measurements or qualitative assessments of morphologies. Here, we present a method to quantify morphological variability in lithic artifacts using 3D models of stone artifacts. Our study on the sequence of the Upper Paleolithic layers V–I from the site Yabroud II in western Syria, demonstrates that utilizing 3D models provides a new insight into the variability of lithic technologies. We use quantitative data on convexities, twist and scar patterns on cores and blades, attributes previously not readily quantifiable, to trace technological change through the archaeological sequence. We are able to identify differences and translate these findings into a grouping of the layers. While layers VI–II are characterized by technological continuity and were grouped together, layers V and I can be separated from this group and represent technologically different groups chronologically before and after. Our results demonstrate the potential of 3D models for studying morphological variability in lithic assemblages.     

Identifying expedient glass tools from a post-contact Tsimshian village using low power (10–100×) magnification

Glass shards from post-contact contexts at the Northern Tsimshian site of Ginakangeek, on the north coast of British Columbia Canada, are identifiable as expedient tool artifacts through analysis of usewear patterns. In this study, we have examined the nature of glass and argued that its mineralogical properties make it analogous to other lithic materials. Although other researchers have found evidence of a lithic-like industry of glass artifacts based on macroscopic features, we have demonstrated that expedient artifacts are identifiable even in the absence of macroscopic traits, through low-power magnification of usewear. We have also tested this thesis against the possibility that microscopic usewear-like patterns were the product of fragmentation or post-depositional effects, and argued that a suite of usewear traits correlates only with use activity. Our experimental suite of glass artifacts indicates that specific actions (such as cutting, scraping, sawing, and chiseling) and the relative hardness of specific substrates produce particular usewear patterns. A number of potential explanations are considered for the appearance of such an industry on the Northwest Coast more than a century after contact with Europeans.     

Exploitation of Lithic Raw Material in The Northwestern Caucasus Upper Paleolithic

Sources of lithic raw material discovered by the authors are described with special regard to methods of transporting stone to Upper Paleolithic sites in the northwestern Caucasus. The analysis of obsidian artifacts suggests that materials were imported from remote regions such as the central and South Caucasus, evidencing mobility patterns in the Upper Paleolithic.     

Defining the provenance of red slipped pottery from Texas and Oklahoma by petrographic methods

Ceramics are among the most important artifacts that archaeologists use to reconstruct patterns of prehistoric trade and exchange. Petrographic analysis of ceramic thin-sections, in addition to providing detailed technological data, enables the identification of sand-tempering agents. These raw materials are potentially important evidence for ceramic provenance, assuming that such common materials themselves would not have been traded. Here we apply methods developed by sedimentary petrographers to the problem of determining the provenance of Red Slipped sherds from late Prehistoric (c. AD 1000–1400) sites in the Caddoan area and contemporaneous Plains Village sites. Modal frequencies of different kinds of quartz, feldspars and lithic grains are used to construct several triangular graphs that reveal compositional patterns indicative of provenance. Sherds from the Plains Village sites exhibit higher frequencies of lithic grains, feldspars and polycrystalline quartz relative to the sherds from sites in eastern Texas and eastern Oklahoma. While anomalous sherds were identified, the longstanding assumption that Red Slipped sherds in Plains Village contexts were traded from the Caddoan area is not supported by these data. These methods have strong application potentials for other, geologically diverse portions of North America.     

Recent developments in the analysis of lithic artifacts

A review of recent research on lithic technology and functional analysis is presented. Our perception of the state of the art is based on a review of the literature published during the past three years and on the topics that were covered at conferences and workshops on lithic analysis. While the goals have essentially remained the same since the turn of the century, concerns with chronology and the classification of lithic artifacts have given way to studies that treat stone implements as products of a dynamic system of human behavior. In order to understand stone artifacts and the people that made and used them, archaeologists must understand theprocesses involved in the acquisition, production, exchange, and consumption of lithic artifacts. In the past ten years, experimental studies involving the manufacturing and use of stone tools have been integrated with studies of refitted or conjoined lithic artifacts and microwear analysis. The result is a much more dynamic view of the variability in assemblages of lithic artifacts. In this review, we focus on replication and technological analysis of chipped stone artifacts and microwear analysis, and consider the implications of this research.     

Geochemical impacts to prehistoric iron-rich siliceous artifacts in the nearshore coastal zone

In the Middle Atlantic region of the United States, landscapes drowned by sea level rise contain scores of prehistoric archaeological sites. These sites provide archaeologists with a rare opportunity to investigate various geologic processes. During the transition from a terrestrial to an offshore setting, the materials associated with an archaeological site are exposed to a series of geochemical processes inherent to the formation of tidal marsh. The duration of the geochemical exposure to tidal marsh is largely dependent on the rate of marine transgression. Here we describe the stages associated with the sulfidization and sulfuricization scheme and the impact to iron-rich lithic artifacts from naturally drowned archaeological sites. Sulfidization and sulfuricization should also impact buried archaeological materials as a result of anthropogenic dredge spoil dumping and the creation of man-made tidal marshes along modern coastlines. Our results indicate that the surfaces of an iron-rich artifact, as well as its interior are visually and geochemically altered by prolonged exposure to the anaerobic conditions of a tidal marsh. Not only should researchers be cautious about making lithic material identification on artifacts found within coastal tidal marsh areas, but museum curators should be aware of the damaging impact of long-term aerobic storage. The geochemical tidal marsh scheme that has altered or corroded iron-rich lithic artifacts in the nearshore zone is an expression of a process that has impacted numerous earlier prehistoric sites currently located on the continental shelf or beneath the coastal estuaries around the world.     

Sources of lithic material procurement in Estancia La Suiza archeological locality (San Luis, Argentina)

The present study is the first step in the elaboration of a regional base of lithic resources for an area located in the northeastern San Luis province, Argentina. Within this area lies the Estancia La Suiza archeological locality, near the hills of Sierra de la Estanzuela, where prehistoric quarry workshops have been identified. The main objective of this work was to explore the use of the different raw materials by prehistoric groups. The general geological setting of the hills of Sierra de la Estanzuela is described, and a distribution of raw material in the area is proposed. The principal sources of lithic material procurement representing the archeological record were identified, and lithic types were quantified and classified. Finally, the lithic material recovered from the Estancia La Suiza 2 quarry was characterized; the results show that the artifacts correspond to the earliest stages of production.     

Paleoindian technological provisioning strategies in the northwestern Great Basin

Great Basin populations during the Pleistocene–Holocene Transition (PHT) are often characterized as being mobile and focused on wetlands; however, the factors that influenced where Paleoindians selected residential campsites are poorly understood. Using predictions derived from optimal foraging-based patch choice models and GIS reconstructions of the PHT landscape, some researchers have argued that occupations in smaller wetlands should have been shorter than occupations in larger wetlands but such arguments have rarely been evaluated using empirical data. The PHT lithic record provides an opportunity to evaluate the relationship between wetland size and occupation span by applying Kuhn's (1995) concept of technological provisioning. Kuhn expects more mobile populations to provision individuals and more sedentary populations to provision places and suggests that: (1) a strategy of provisioning individuals should be reflected by a high proportion of more extensively used artifacts made on non-local raw materials; and (2) a strategy of provisioning places should be reflected by a high proportion of less extensively used artifacts made on local raw materials. We apply the technological provisioning concept to lithic assemblages from two of the Parman localities, extensive PHT sites in the northwestern Great Basin, and compare local and nonlocal artifacts to determine if Paleoindians shifted from provisioning individuals while moving to/from the sites to provisioning the place while occupying them. There is no relationship between artifact transport distance and artifact use intensity. We interpret these findings as evidence that Paleoindians did not alter their provisioning strategies while occupying the Parman localities, likely because occupations were brief within a small wetland poorly-suited to support groups for long periods.     

Mixed occupation during the Middle Palaeolithic: Case study of a small pit-cave-site of Les Pêcheurs (Ardèche,south-eastern France)

The Pêcheurs cave is a unique example of a Middle Palaeolithic site with three kinds of accumulations: (1) ibex that died in a natural trap, (2) carnivores that died within the cavity, and, (3) a series of short-term occupations by humans who left a few artifacts and a hearth area. Biological patterns of ibex remains (skeletal parts, age) show a homogeneous structure, related to natural death inside the cave. The Chassezac valley is narrow and sinuous, bordered by steep cliffs occupied by well-adapted hoofed-species (Caprinae). Moreover, Les Pêcheurs is a shallow cave, pit-like, and in its deepest part (Sector 4) provided both man and animals with shelter. The presence of a fire place (in the middle of the sequence of Sector 4) firmly indicates the presence of an in situ occupation by a small group of hominids. According to the stratigraphical patterns and the analysis of the lithic assemblages, artifacts do not seem to have been introduced into sediments. The lithic assemblages (technically homogeneous) indicate that small mobile human groups inhabited a cave that offered, by virtue of its morphology, a natural shelter against the cold winds blowing in the Chassezac valley and the plateaus of the south-eastern borders of the Massif Central Mountains. The exploitation of biotopes such as this rocky area constitutes a specific case of human subsistence behavior and settlement strategy. The deepest layer is characterized by a lithic assemblage mostly made of local raw material (quartz) implying a low investment in lithic production. Few flakes made from non-local flints attest to the mobility of the human occupants who moved across these areas and perhaps found in the valleys, short-term refuge.     

Application of a new typological approach to classifying denticulate and notched tools: the study of two Mousterian lithic assemblages

Identifying tools by means of morphological attributes are widely used in lithic studies to categorize retouched artifacts from different archaeological periods. This procedure has facilitated the exchange of information between separate researchers and has improved the comparison of different assemblages. In these classifications, denticulates and notched tools have been regularly interpreted as analogues and chronologically unvaried in different and vast territories. Based on the definitions developed by Bordes, the denticulate category has become a catchall for any kind of tool bearing concavities. In this paper a new quantitative approach to the classification of denticulates and notched tools is proposed. The new methodology is based on measuring the length of notches and their distribution on the perimeter of the blank. Analyzing the lithic series of the Abric Romaní rock-shelter (Spain) and Grotta Maggiore di San Bernardino (Italy) led to the identification of 11 redundant forms: eight denticulates and three notched tools. Moreover, the application of Kuhn’s Geometric Index of Unifacial Reduction brought local manufacturing trends to light, calling into question the presumed geographical uniformity of these categories of artifacts.     

Using lithic assemblage formation to approach Middle Palaeolithic settlement dynamics: El Salt Stratigraphic Unit X (Alicante,Spain)

The superposition of anthropogenic remains usually results in archaeological palimpsests, hindering an accurate characterization of the behavior underlying such remains. Aimed at facing this methodological constraint in the study of Palaeolithic contexts, we present a contextual approach to Neanderthal settlement dynamics based on an understanding of lithic assemblage formation processes. We focused on a set of lithic artifacts from the Middle Palaeolithic site of El Salt. With the goal of isolating temporally constrained units of behavioral analysis, we analyzed the spatial distribution of lithic, faunal and combustion remains. Then, the lithic records from each of the resulting units were analyzed from a genetic and technical perspective. This goal was achieved by identifying lithic Raw Material Units (RMU) through observations on reduction processes, refits and their spatial distribution. Our results suggest that El Salt SU X lithic remains represent several diachronic human occupation episodes and different site functions. This study illustrates the benefit of investigating lithic assemblage formation processes to alleviate the palimpsest problem in Palaeolithic contexts.     

Upper Paleolithic raw material economies at Üçağızlı cave, Turkey

This paper addresses variation in lithic raw material economy within the early Upper Paleolithic at Üçağızlı cave (south-central Turkey). The stratigraphic sequence documents some 12,000 years of the early Upper Paleolithic, entailing changes in lithic technology, raw material exploitation, and game use. Although the same lithic raw materials were exploited throughout the sequence to make quite similar ranges of products, there are marked changes in the ways raw materials from different source areas were treated, including patterns of transport and raw material consumption. The concept of technological provisioning is used to understand changing strategies for procuring and managing supplies of flint from different source locations. Shifts in raw material economy are argued to represent responses to changes in residential mobility and the scale/duration of occupations at the cave itself: data on cultural features and foraging strategies provide independent evidence for these shifts in land use. Results have implications for more nuanced approaches to investigating of lithic raw material economies and the significance of “raw material transfers.”     

Two sides of the same coin—rocks, bones and site function of Picareiro Cave, central Portugal

The issue of site function rarely has been a main focus in the study of Portuguese Upper Paleolithic. This fact may be related to a lack of interest in this research area. More likely, however, it is due to the fact that there are relatively few Paleolithic sites with data that allow a serious study of site function. At Picareiro Cave, central Portugal, there are various data sets from level F/G dated to the latter Magdalenian that are adequate for this type of research. These are habitat structures, lithic artifacts, macro- and mesofauna, as well as 3D location of all artifacts and fauna larger than 1 cm. Based on the interpretation of the analytical results of each data set, it is possible to reconstruct site function of this particular level of Picareiro Cave. The morphology of one of the hearths, being very large in size, with the base prepared and a pavement surrounding it, as well as the condition and diversity of fauna, indicates that it was used for processing the meat of rabbits, red deer, and wild boar, probably through smoking and grilling. All of the evidence from the different types of data (lithic artifacts, habitat structures, use of space, and fauna) indicate that Layers F/G of Picareiro Cave are the result of a specific task, that of processing animal carcasses of rabbits, red deer, and wild boar.     

湖北丹江口杜店旧石器时代遗址发现的遗迹现象初探

位于湖北省丹江口库区的杜店旧石器时代遗址于2008年由吉林大学边疆考古研究中心进行发掘,获得了一批重要材料。极为难得的是,在该遗址发现了一处旧石器时代晚期的遗迹现象(编号08DDIYJ1)。本文从遗迹的形态、埋藏学以及砾石和石制品的原料、大小、类型等方面进行了分析和探讨,初步推断这是一处属于原地埋藏的石器加工场所。该遗迹的发现与研究为探讨杜店遗址以至汉江流域旧石器时代晚期古代居民的文化面貌、工业技术特点以及生业模式提供了强有力的佐证。     

Archaeological Publications

Abstract

A number of lithic studies over the past several years have indicated that average flake weight (size) appears to be a direct reflection of the ease of lithic procurement, with the greater the distance to the lithic source, the smaller the respective general flake size. Similar high-quality lithic materials from Pot Creek Pueblo and the Cerrita pithouse site of the Taos area of the northern Rio Grande Valley in New Mexico provide an excellent basis for the study of the effects of source distance on the metrical attributes of lithic material due to the wide array of local and nonlocal lithic resources available at varying distances from the two settlements and utilized within them. The analysis indicates that flake thickness and volume (flake length × width × thickness) provide statistically significant linear trends and patterns in relation to respective source material distance. The general flake dimensional-decremental trend with increasing source distance probably reflects smaller lithic parent material sizes with increasing material source distance as well as a lithic technology oriented toward greater material conservation and less technological variability as the distance to the respective lithic material source increases.     

Molluscan Shell Knives and Experimental Cut-Marks on Bones

Abstract

Experimentation demonstrates that the retouched edges of molluscan shells can be used effectively as butchery knives in the absence of lithic raw materials and leave striations on bone surfaces that may be indistinguishable from cut-marks made by stone knives. The potential of such non-lithic cutting tools suggests one new possible category of early artifact, and may explain the presence of cut-marks on fossil bones in paleoenvironments where stone artifacts were absent or rare.     

Late Prehistoric High-Altitude Hunter-Gatherer Residential Occupations in the Argentine Southern Andes

Test excavations were conducted at Risco de los Indios (RDLI), a site at 2480 masl with 29 residential features and a well-developed midden containing abundant floral, faunal, lithic, and ceramic materials. Analyses indicate the site was intensively used ca. 500 cal b.p. as a residential base for groups focused on hunting guanaco, supplemented by locally-available wild flora and fauna as well as domestic beans transported from the lowlands. Ceramic and obsidian artifacts indicate these groups were highly mobile and in contact with groups on the eastern and western margins of the Andes. These patterns compare favorably to those seen in the region’s other high altitude villages. It appears that the development of these patterns began with population increase and economic intensification in the lowlands ca. 2000 cal b.p. and that the move to slightly lower elevation settings like RDLI may have been conditioned by the onset of the Little Ice Age.     

On stone-boiling technology in the Upper Paleolithic: behavioral implications from an Early Magdalenian hearth in El Mirón Cave,Cantabria, Spain

Stone boiling is one of the principal cooking methods used by hunter-gatherer societies. The present paper proposes behavioral and organizational inferences as to how stone boiling was incorporated into hunter-gatherer subsistence practices through an examination of a shallow-basin hearth in an Early Magdalenian level (c. 15,500 ¹⁴C B.P.) of El Mirón Cave, Cantabria (northern Spain). Exploratory analysis of spatial patterns of archaeological remains (bones, lithic artifacts, and fire-cracked rocks) and use-life analysis of fire-cracked rocks demonstrate that the hearth was used and maintained during visits of humans who preyed mainly on ibex and red deer near the site. The relative accessibility of these ungulates and cost-induced technology of stone boiling suggest the implication that stone boiling was employed to maximize the energy and nutrition obtained from carcasses of these game taxa under the circumstance of resource intensification.