A New Seismic Intensity Parameter to Estimate Damage in Buried Pipelines due to Seismic Wave Propagation

A new seismic intensity parameter to estimate damage in buried pipelines due to seismic wave propagation is proposed. This parameter depends on the peak ground velocity (PGV) and the peak ground acceleration (PGA). It is shown that PGV²/PGA is related to displacement, a parameter directly related to ground strain, which is the main cause of buried pipeline damage. For the case of Mexico City, this parameter exhibits higher correlation with damage than PGA or PGV alone. Finally, we presented intensity-damage relations for the Mexico City's primary water system using PGV²/PGA as the measure of seismic intensity.     

ATTENUATION RELATIONSHIP FOR LOW MAGNITUDE EARTHQUAKES USING STANDARD SEISMOMETRIC RECORDS

Northwestern Italian weak-motion data were used to study attenuation characteristics of horizontal peak ground acceleration (PGA) and horizontal peak ground velocity (PGV) from earthquakes of local magnitudes (M _l ) up to 5.1. Data have been provided by the RSNI (Regional seismic network of Northwestern Italy) and RSLG (Regional seismic network of Lunigiana-Garfagnana) waveform database. The database consists of more than 14000 horizontal components recorded in the period 1999-2002 by both broadband and enlarged band seismometers. The accuracy of the procedure used to extract PGA values from the velocity recordings was verified comparing observed and derived PGA values at station STV2, which was equipped with both a temporary K2 Kinemctrtcs accelerometer and Guralp CMG40 broadband sensor. The attenuation of both peak ground acceleration and peak ground velocity was found to be logarithmically distributed with a strong attenuation for low distances (less than 50 km) and low M _l values (<3.0). The resulting equations are:

Log(PGA)=?3.19+0.87M?0.042M ²?1.92 Log(R)+0.249S,

Log(PGA)=?4.23+0.76M?0.018M²?1.56 Log(R)+0.230S,

where PGA is expressed in g, PGV is expressed in m/s, M is local magnitude, R is the hypocentral distance in kilometers and S is a dummy variable assuming values of 0 and 1 for rock and soil respectively. For increasing distance and magnitude, both PGA and PGV values show a linear distribution. The validity range of the obtained attenuation relationships is 0–200 km for distances and M _l up to 4.5. Sensitivity studies performed by analysis of residuals, showed that predicted PGA and PGV values are stable with respect to reasonable variations of the model and distances providing the data. Comparisons with attenuation relationships proposed for Italian region, derived from strong motion records, are also presented.     

Estimation of Strong Ground Motions in Southwest Western Australia with a Combined Green's Function and Stochastic Approach

As only a very limited number of earthquake strong ground motion records are available in southwest Western Australia (SWWA), it is difficult to derive a reliable and unbiased strong ground motion attenuation model based on these data. To overcome this, in this study a combined approach is used to simulate ground motions. First, the stochastic approach is used to simulate ground motion time histories at various epicentral distances from small earthquake events. Then, the Green's function method, with the stochastically simulated time histories as input, is used to generate large event ground motion time histories. Comparing the Fourier spectra of the simulated motions with the recorded motions of a ML6.2 event in Cadoux in June 1979 and a ML5.5 event in Meckering in January 1990, provides good evidence in support of this method. This approach is then used to simulate a series of ground motion time histories from earthquakes of varying magnitudes and distances. From the regression analyses of these simulated data, the attenuation relations of peak ground acceleration (PGA), peak ground velocity (PGV), and response spectrum of ground motions on rock site in SWWA are derived.     

CALIBRATION OF FORCE REDUCTION FACTORS OF RC BUILDINGS

A comprehensive study is undertaken to assess and calibrate the force reduction factors (R) adopted in modern seismic codes. Refined expressions are employed to calculate the R factors “supply” for 12 buildings of various characteristics represent a wide range of medium-rise RC buildings. The “supply” values are then compared with the “design” and “demand” recommended in the literature. A comprehensive range of response criteria at the member and storey levels, including shear as a failure criterion, alongside a detailed modelling approach and an extensively verified analytical tool are utilised. A rigorous technique is employed to evaluate R factors, including inelastic pushover and incremental dynamic collapse analyses employing eight natural and artificial records. In the light of the information obtained from more than 1500 inelastic analyses, it is concluded that including shear and vertical motion in assessment and calculations of R factors is necessary. Force reduction factors adopted by the design code (Eurocode 8) are over-conservative and can be safely increased, particularly for regular frame structures designed to lower PGA and higher ductility levels.     

Empirical Correlations of Frequency-Content Parameters of Ground Motions with Other Intensity Measures

Empirical correlations between the frequency-content parameters of earthquake ground motions and amplitude-, cumulative-, and duration-based intensity measures (IMs) are examined in this study. Three commonly used scalar frequency-content parameters are considered, namely the mean period (T_m), the average spectral period (T_avg), and the smoothed spectral predominant period (T₀). It is found that the frequency-content parameters have weakly negative correlations with high-frequency IMs such as peak ground acceleration (PGA) and spectral accelerations (SAs) at periods smaller than 0.3 s, low-to-moderate positive correlations with peak ground velocity (PGV) and SA within a period range of 0.5 s–10 s, negligible correlations with cumulative-based IMs, and weakly positive correlations (in the vicinity of 0.1–0.3) with significant durations. Simple piecewise parametric equations are proposed to fit the empirical correlations of T_m, T_avg, and T₀ with SA over the entire period range. The presented correlation results and parametric models enable the frequency-content parameters to be easily used in various applications such as ground-motion selection and vector-based probabilistic seismic hazard analysis.     

Impact of Modification on Ground Motion Characteristics and Geotechnical Seismic Analyses for a California Site

The impact of different modification techniques on ground motion characteristics and results of seismic geotechnical analyses is investigated for a site in California. Twenty-eight motions were selected and scaled and also modified using both time domain (TD) and frequency domain (FD) techniques. PGV and PGD of the TD-modified motions are found to be larger than their FD-modified counterparts, but slightly less than the scaled ground motion characteristics. Cyclic stress ratios and amplification factors are similar for all sets of motions. Newmark-type slope displacements caused by the scaled and modified ground motions are similar (within 25%) for a variety of sliding masses.     

Modification of Ductility Reduction Factor for Strength Eccentric Structures Subjected to Pulse-Like Ground Motions

This article investigates the ductility reduction factors for RC eccentric frame structures subjected to pulse-like ground motions. The structural models are with the strength eccentricities which are much disadvantageous than the stiffness eccentricities during the inelastic response range. A method to determine the ductility reduction factors of the strength eccentric structures is suggested by modifying those of reference symmetric structures through an eccentricity modification factor. The four factors of strength eccentricity ratio, ductility ratio, story number and velocity pulse of ground motions, are investigated to gain insight into this modification factor. It shows that the ductility reduction factors of the eccentric structures are clearly smaller than those of the symmetric structures. The eccentricity modification factor is mainly affected by the strength eccentricity and the ductility ratio, decreasing with the increment of the eccentricity or the decrement of the ductility ratio in a medium eccentricity range. The earthquake pulse-like effect and the eccentricity have coupling influence on the modification factor, while the effect of story number is not apparent. Based on the results of a comprehensive statistical study a simplified expression is suggested, which can estimate the eccentricity modification factors for both pulse-like and nonpulse-like ground motion cases.     

Attenuation Relationships for Iran

The purpose of this study is to derive the attenuation relationships for PGA, PGV, and EPA parameters for areas within the seismic zones of Zagros, Alborz and Central Iran with rock and soil substructures. In order to do so, at first the available scientific data including the methods used for deriving attenuation relationships and the parameters involved have been gathered. Afterwards, all the efforts have been focused on gathering a thorough catalogue of earthquakes occurred in Iran. In this regard, a majority of the available catalogs in Iran have been gathered and corrected through different methods and finally a set of 89 earthquake events including 307 earthquake records with reliable data was chosen.

Since in order to derive the attenuation relationships it is essential to extract the parameters from the acceleration records, a great effort was placed on gathering the earthquake acceleration records of Iran. This resulted in building a database of a majority of the earthquake records up to the year of 2004. Afterwards, correction methods applicable to earthquakes records of Iran considering the type of machines used and the ground type were examined which resulted in certain guidelines for correction of earthquake acceleration record data related to Iran.

In the next step the needed parameters were extracted from the earthquake acceleration record data which were consequently divided into two seismic zones of Zagros, and Alborz and Central Iran according to tectonic conditions. After examination of the parameters and choosing the most appropriate among them, the attenuation relationships were derived for such parameters.     

Prediction of High-Damping Seismic Demands in Eastern North America

This article investigates high-damping seismic demands and associated damping reduction factors in Eastern North America (ENA). A database of hybrid empirical records with moment magnitudes M ≥ 6.0 is first studied to evaluate 5%- to 30%-damped seismic demands. A new magnitude- and distance-based equation is proposed to predict ENA spectral displacements and then used to characterize their sensitivity to variations in period, magnitude, epicentral distance and site conditions. The proposed equation is also used to assess damping reduction factors in ENA. The results contribute to improved assessment of seismic demands in ENA while accounting for added-damping in structural seismic design.     

A Static Nonlinear Procedure for the Evaluation of the Elastic Buckling of Anchored Steel Tanks Due to Earthquakes

Ground-supported steel tanks experienced extensive damage in past earthquakes. The failure of tanks in earthquakes may cause severe environmental damage and economic losses. This study deals with the evaluation of the elastic buckling of above-ground steel tanks anchored to the foundation due to seismic shaking. The proposed nonlinear static procedure is based on the capacity spectrum method (CSM) utilized for the seismic evaluation of buildings. Different from the standard CSM, the results are not the base shear and the maximum displacement of a characteristic point of the structure but the minimum value of the horizontal peak ground acceleration (PGA) that produces buckling in the tank shell. Three detailed finite element models of tank-liquid systems with height to diameter ratios H/D of 0.40, 0.63, and 0.95 are used to verify the methodology. The 1997 UBC design spectrum and response spectra of records of the 1986 El Salvador and 1966 Parkfield earthquakes are used as seismic demand. The estimates of the PGA for the occurrence of first elastic buckling obtained with the proposed nonlinear static procedure were quite accurate compared with those calculated with more elaborate dynamic buckling studies. For all the cases considered, the proposed methodology yielded slightly smaller values of the critical PGA for the first elastic buckling compared to the dynamic buckling results.     

Correlations Between Frequency Content Indicators of Strong Ground Motions and PGV

The frequency content of ground motions seems to be one of the most important parameters to explain the structural damage experienced during worldwide strong earthquakes. The frequency content of ground motions can be characterized by various stochastic and/or deterministic indicators: the frequency bandwidth indicator ? (Cartwright & Longuet-Higgins) related to the power spectral density function and, respectively, the control (corner) period T_c of the structural response spectra or the mean period T_M . Peak ground velocity (PGV) and the ratio PGA/PGV can be used as either damage potential parameters or frequency content indicators. A comparative analysis of stochastic and deterministic frequency content indicators and of PGV is applied to a set of 30 strong ground motion records having peak ground acceleration (PGA) from 0.2–0.8 g and recorded on 4 continents during the last 70 years.     

Reduction Factors for Seismic Design Spectra for Structures with Viscous Energy Dampers

A simple mathematical expression is proposed to estimate spectra reduction damping factors for seismic design of systems with viscous dampers. The expression is obtained from the ratios between ordinates of uniform hazard spectra associated with two different return intervals (50 and 125 years), corresponding to sites with different types of soil within the Valley of Mexico. The expression proposed depends on the dominant period of the soil, and on both the vibration period and damping ratio of the structural system. Values of the damping factors proposed here are comparable to those recommended by different authors and seismic design building codes.     

EVALUATION OF CAPACITY SPECTRUM METHOD FOR ESTIMATING THE PEAK INELASTIC RESPONSES

The accuracy of the capacity spectrum method (CSM) depends on the precise estimation of equivalent period and damping ratio as well as the modification of the demand spectrum. In this paper, the CSM provided in ATC-40 for estimating the peak inelastic responses is evaluated. First, the effect of equivalent period and damping ratio estimation on the accuracy of the CSM is assessed. Analyses results indicate that the difference between estimation methods is large when the structural nonlinearity is large, but becomes negligible as the hardening ratio increases. Next, the reduction factors provided in ATC-40 and Eurocode are evaluated. It is found that the acceleration responses obtained using the factor of Eurocode is closer to the actual ones than those obtained using the factors of ATC-40. Finally, the demand spectrum is constructed using the peak absolute acceleration and pseudo-acceleration. The results obtained using the peak absolute acceleration is found to be generally larger than those obtained using the pseudo-ones. Since the original CSM generally underestimates the response, the use of peak absolute acceleration in the construction of demand spectrum produces the response relatively closer to the exact one. However, the use of peak absolute acceleration overestimates the response more when the original CSM overestimates the response.     

Relationships between Modified Mercalli Intensity and Engineering Ground-Motion of the Earthquakes in Persia

New empirical relationships between modified Mercalli intensity (MMI) and engineering ground acceleration (PGA) of the earthquakes were generated for the Iranian territory. MMI and PGA values were gathered from 16 large earthquakes. We derived two sets of relationships which predict MMI in terms of PGA; each developed using both horizontal and three components of accelerograms. The first set is independent of earthquake magnitude and epicentral distance. Better results were observed when magnitude and epicentral distance conditions were included into equations. They might be used for both rapid assessments of ground shaking and also mapping damage potential in Iran and neighboring area.     

Assessment of Effects of Reductions of Lateral Stiffness along Height on Buildings Modeled as Elastic Cantilever Shear Beams

A simplified model useful for assessing economic losses due to moderate seismicity events in urban areas has been developed by studying the behavior of buildings before yielding their structural system, allowing for nonuniform stiffness along their height. In particular, buildings are modeled as cantilever shear beams with uniform mass and parabolic reduction of lateral stiffness. This particular stiffness distribution is relevant, as it could be expected to occur in buildings where earthquake action is a critical structural design criterion. The equation of motion governing the dynamic behavior of the proposed model is solved analytically, finding mode shapes in terms of first and second zero-order Legendre functions. The solution is verified by comparing it with results obtained from fine mesh finite element models. The effect of reducing the lateral stiffness is then studied in the first five modes of vibration. Results include modal periods, mode shapes, modal participation factors, and derivatives of mode shapes. In general, it is found that effects of reduction of lateral stiffness in mode shapes are moderate when the lateral stiffness in the free end is smaller than about seventy percent of the lateral stiffness at the fixed end, but become significant for larger reductions. Effects are particularly important for the derivative of the mode shapes, which could play a significant role in estimating interstory drift demands in buildings. Model usefulness is showcased by analyzing a test case where both acceleration and drift demands are assessed by considering uniform beams and beams with parabolic stiffness variation, finding notable improvements by considering the latter.     

SEISMIC HAZARD ASSESSMENT OF UNITED ARAB EMIRATES AND ITS SURROUNDINGS

This paper presents the seismic hazard assessment and seismic zoning of the United Arab Emirates (UAE) and its surroundings based on the probabilistic approach. The area that has been studied lies between 50°E-60°E and 20°N-30°N and spans several Gulf countries. First, the tectonics of the area and its surroundings is reviewed. An updated catalogue, containing both historical and instrumental events is used. Seismic source regions are modelled and relationships between earthquake magnitude and earthquake frequency is established. A modified attenuation relation for Zagros region is adopted. Seismic hazard assessment is then carried out for 20 km interval grid points. Seismic hazard maps of the studied area based on probable Peak Ground Acceleration (PGA) for 10% probability of exceedance for time-spans of 50, 100 and 200 years are shown. A seismic zone map is also shown for a 475-year return period. Although the results of the seismic hazard assessment indicated that UAE has moderate to low seismic hazard levels, nevertheless high seismic activities in the northern part of UAE warrant attention. The northern Emirates region is the most seismically active part of UAE. The PGA on bedrock in this region ranges between 0.22 g for a return period of 475 years to 0.38 g for a return period of 1900 years. This magnitude of PGA, together with amplification from local site effect, can cause structural damage to key structures and lifeline systems.     

Influence of Uncertain Source Parameters on Strong Ground Motion Simulation with the Empirical Green's Function Method

A combined stochastic and Green's function approach was developed to simulate strong ground motions in Southwest Western Australia (SWWA) in a previous study. Although it was demonstrated that adopting the source parameters derived from other regions yielded reasonable simulation of ground motions in SWWA as compared with a few available strong motion records, the effect of source parameter variations on simulated ground motions was not known. This article performs a statistical study of the effects of random fluctuations of the seismic source parameters on simulated strong ground motions. The uncertain source parameters, i.e., stress drop ratio, rupture velocity, and rise time corresponding to the empirical source models are assumed to be the respective mean value of the parameter and normally distributed with an assumed coefficient of variation. The Rosenblueth's point estimate method [Rosenblueth, 1981 Rosenblueth, E. 1981. Two-point estimates in probabilities. Applied Mathematical Modelling, 5: 329–335. [Crossref], [Web of Science ®] , [Google Scholar]] is used to calculate the statistics of the simulate ground motion parameters corresponding to different magnitudes and epicentral distances. The accuracy of the Rosenblueth's point estimate method in estimating the mean and standard deviation of ground motion PGA, PGV, and response spectrum is proven by simulating the ground motions from an ML6.0 and epicentral distance 100 km event with both the Rosenblueth's point estimate method and the Monte Carlo simulation method. A sensitivity analysis is preformed to investigate the effect of random fluctuations of each source parameters on strong ground motion simulation. A coefficient of variation model for ground motion parameters is developed based on the simulated data as a function of the variations of the three source parameters and earthquake magnitude, which can be used in probabilistic predictions of earthquake ground motions with uncertain source parameters.     

SEISMIC HAZARD ASSESSMENT OF METROPOLITAN TEHRAN,IRAN

This paper presents a probabilistic seismic hazard assessment of Tehran, the capital of Iran. Two maps have been prepared to indicate the earthquake hazard of Tehran and its vicinity in the form of iso-acceleration contour lines. They display the probabilistic estimate of Peak Ground Acceleration (PGA) over bedrock for the return periods of 475 and 950 years. Tehran is a densely populated metropolitan in which more than 10 million people live. Many destructive earthquakes happened in Iran in the last centuries. It comes from historical references that at least 6 times, Tehran has been destroyed by catastrophic earthquakes. The oldest one happened in the 4th century BC. A collected catalogue, containing both historical and instrumental events and covering the period from the 4th century BC to 1999 is then used. Seismic sources are modelled and recurrence relationship is established. For this purpose the method proposed by Kijko [2000] was employed considering uncertainty in magnitude and incomplete earthquake catalogue. The calculations were performed using the logic tree method and three weighted attenuation relationships; Ramazi [1999], 0.4, Ambraseys and Bommer [1991], 0.35, and Sarma and Srbulov [1996], 0.25. Seismic hazard assessment is then carried out for 12×11 grid points using SEISRISK III. Finally, two seismic hazard maps of the studied area based on Peak Ground Acceleration (PGA) over bedrock for 10% probability of exceedance in two life cycles of 50 and 100 years are presented. The results showed that the PGA ranges from 0.27(g) to 0.46(g) for a return period of 475 years and from 0.33(g) to 0.55(g) for a return period of 950 years. Since population is very dense in Tehran and vulnerability of buildings is high, the risk of future earthquakes will be very significant.     

Aspartic acid racemization variability in ancient human remains: implications in the prediction of ancient DNA recovery

The extent of racemization of aspartic acid (Asp) – expressed as d/l ratio – has been used as a marker of biomolecular degradation in ancient remains. However, Asp racemization rate is highly variable, and depends on biochemical and geochemical factors. In this paper we aim to determine to which extent the fraction analyzed and the kind of sample used may influence the d/l Asp ratios. Other factors, such as burial site and sample preservation conditions, are also considered.     

Effects of Near-Fault Pulses on Nonlinear Soil-Structure Systems

ABSTRACT

This paper is focused on effects of near-fault pulse characteristics on seismic performance of soil-structure systems considering foundation uplifting and soil yielding. To this end, an extensive parametric study is conducted. Mid-to-high-rise buildings of different aspect ratios (SR) resting on shallow mat foundations are investigated. Different vertical load-bearing safety factors (F_S) of foundation as well as different soil types (i.e. soft to very dense) are considered in this study. Finite element method is used for numerical modeling. The underlying soil is simply modeled with a set of nonlinear springs and dashpots beneath the foundation. Mathematical near-fault pulse models of fling step and forward directivity are used as input ground motions. The results show that reduction in structural drift demands due to nonlinear soil-structure interaction (SSI) is more considerable in the case of short-period pulses compared to long-period ones. In more precise words, significant reduction occurs when pulse-to-fixed-base period ratio falls within 0.7–1.5 in the case of directivity pulses and 0.5–1.4 in the case of fling pulses. It is also demonstrated that the beneficial effects of nonlinear SSI reduce when the number of stories increases.