Robust Period-Independent Ground Motion Selection and Scaling for Effective Seismic Design and Assessment

A period-independent approach for the selection and scaling of ground motion records aimed at reducing demand variability is proposed for seismic response history analysis. The same set of scaled records can be used to study various structures at the same site regardless of their dynamic characteristics. The statistical robustness of the proposed and current approaches is compared through nonlinear inelastic dynamic analyses performed on single-degree-of-freedom systems and multi-story braced frames. The proposed approach leads to consistent response predictions with a limited number of records. This is advantageous for day-to-day structural design or assessment against code hazard-based seismic demand levels.     

Experimental Study on the Seismic Performance of Superimposed RC Shear Walls with Enhanced Horizontal Joints

The seismic performance of superimposed reinforced concrete (RC) shear walls is decreased by rocking behavior and damage concentration at the horizontal joint. An enhanced horizontal joint method is proposed to improve the corresponding seismic performance. To validate the reliability of the proposed method, three full-scale superimposed walls and a cast-in-place shear wall (for comparison) are designed and tested under the quasi-static load. The test results indicate that the rocking phenomenon can be prevented using the proposed method, and the seismic performance of superimposed RC shear walls with enhanced horizontal joints is comparable to that of the cast-in-place RC shear walls.     

Simplification and Assessment of Modal-Based Story Damage Index for Reinforced Concrete Frames Subjected to Seismic Excitations

Different relations have been represented for the local damage index of structures to date, while the same application is defined for them as can be an indicator of relative sustained damage by the components or stories. Since different force-resisting systems subjected to the ground motions can behave differently, some well-known story damage indices are evaluated for the reinforced concrete frames with regards to their operation during nonlinear time history analysis. Two general concepts of story damage determination are selected for this purpose. SDI is a modal-based story damage index, which is calculated by the modal frequency and mode shapes. The behavior of this local index is evaluated during the seismic excitations. The results were compared with Park-Ang and modal flexibility story damage indices. Based on analytical study on seismic responses of some RC frames subjected to a suit of earthquake records a new story damage index has been developed. It has been derived from a simple global damage equation (softening index) using a normalized ratio of inelastic story shear to its drift. A procedure is recommended to use the proposed equation without any requirement to perform nonlinear dynamic analysis, which can significantly reduce the computational efforts. Distribution of the new represented SDI along the structural height shows a good agreement with damaged state of the RC frames after seismic excitations.     

Effect of Irregular Seabed on Seismic Motions

Several studies indicate that marine seismic activity is vast. Actually, about 90% of all natural earthquakes have epicenters in o_shore areas and may cause damage to subsea and floating structures. In this numerical study the indirect boundary element method is used to analyze the influence that some parameters, involved in this kind of problems, have on the dynamic response of marine waters under the incidence of theoretical seismic events. According with the results, the seismic amplifications depend on the seabed configuration and produce displacements which can be a serious concern.     

A New Proposed Passive Mega-Sub Controlled Structure and Response Control

It is still a serious challenge for structural engineers to effectively reduce the seismic responses of tall and super tall buildings to further improve these structural safeties. In order to solve this problem, in this article a new kind of structural configuration, named passive mega-sub controlled structure (PMSCS), is presented, which is constructed by applying the structural control principle into structural configuration itself, to form a new structure with obvious response self-control ability, instead of employing the conventional method. In the analysis of PMSCS the equations of motion of the seismically excited system are developed, based on a realistic analytical model of the complete mega-structural system. Expressions of the displacement and acceleration response of the structure, resulting from simulated earthquake ground motions represented by stationary and nonstationary random processes, are derived. These responses are then determined for both the PMSCS and its conventional mega-sub structure (MSS) counterpart, whose configuration was modeled after the traditional mega-frame that was used in the construction of the Tokyo City Hall. A parametric study of the structural characteristics that influence the response control effectiveness of the PMSCS is presented and discussed. The region over which these structural characteristics yield the optimum seismic response control of the PMSCS is identified and serves as a very useful design tool for practitioners. The study illustrates that the proposed PMSCS offers an effective means of controlling the seismic displacement and acceleration response of tall/super-tall mega-systems. It also overcomes shortcomings exhibited in earlier proposed mega-sub controlled structural configurations.     

Seismic Fragility Study of Displacement Demand on Fire Sprinkler Piping Systems

Seismic damage to fire sprinkler piping systems is not only caused by inertial forces or interstory drifts, but also by impact with surrounding objects. The collision of constituents of piping systems with nearby objects increases the chance of damage to the piping itself and to adjacent objects. In this study, the probability of seismic damage to fire sprinkler systems due to impact is quantified by obtaining seismic fragility parameters for large diameter pipes passing through walls and floors, as well as small diameter pipes that typically interact with suspended ceilings. The results of two shaking table experiments conducted at the University of Nevada, Reno and E-Defense test facility, and a high-fidelity numerical model of a hospital piping system are used to evaluate the displacement demands. Piping interaction fragility curves are generated based on clearances between adjacent objects and pipes. The probability of piping interactions and damage to piping systems subjected to different levels of peak floor acceleration is compared for different clearances. It is found that the probability of damage due to impact is comparable with the probability of exceeding other limit states, like the leakage in fittings, when a 1 in or 2 in gap is provided around large and small diameter pipes, respectively.     

Critical Assessment of Intensity Measures for Seismic Response of Italian RC Bridge Portfolios

The seismic assessment of a road network depends largely on the characterization of the fragility of its bridge components. The accuracy of bridge seismic demand estimates and the use of proper intensity measures (IM) will significantly influence such task. The available literature has mainly focused on buildings or a limited number of bridge configurations and IMs, which may not be representative for bridge portfolio assessment studies. In this paper, the correlation quality between a larger pool of traditional and innovative IMs and the nonlinear dynamic response of typical Italian RC bridges is investigated to identify the best-performing IMs.     

Nonlinear Structural Response to Low-Cut Filtered Ground Acceleration Records

Ground acceleration records obtained from instruments in the field are often filtered to reduce noise in both low and high frequency bands before being used for structural response analyses. The structural analysis using a filtered acceleration record may elongate the fundamental period of a structure which will potentially lead to an underestimation of the nonlinear response.

The nonlinear response of single-degree-of-freedom systems to low-cut filtered ground acceleration records is investigated. Based on the results of this study, a simple criterion for selecting ground acceleration records for seismic response analyses is proposed to avoid underestimating the nonlinear structural response.     

A New Seismic Intensity Parameter to Estimate Damage in Buried Pipelines due to Seismic Wave Propagation

A new seismic intensity parameter to estimate damage in buried pipelines due to seismic wave propagation is proposed. This parameter depends on the peak ground velocity (PGV) and the peak ground acceleration (PGA). It is shown that PGV²/PGA is related to displacement, a parameter directly related to ground strain, which is the main cause of buried pipeline damage. For the case of Mexico City, this parameter exhibits higher correlation with damage than PGA or PGV alone. Finally, we presented intensity-damage relations for the Mexico City's primary water system using PGV²/PGA as the measure of seismic intensity.     

Statistical Characterization of Structural Demand under Earthquake Loading. Part 1: Robust Estimation of the Central Value of the Data

This article is the first of two companion articles addressing the statistical characterization of seismic demand. Performance-based earthquake engineering methodologies often require the characterization of central value estimates of structural demand. Since outliers can occur in the data, central value estimates should be determined by robust estimation methods. The performance of 50 robust central value estimators is evaluated, for different sample sizes, using the chord rotation, curvature, shear force, and inter-story drift demands obtained after analyzing five reinforced concrete structures under real earthquake records scaled to several intensities. Based on the results, seven estimators are proposed for different sample sizes.     

Effects of Different Record Selection Methods on the Transverse Seismic Response of a Bridge in South Western British Columbia

The seismic response of a continuous 4-span bridge designed according to the current Canadian seismic provisions is investigated using Incremental Dynamic Analysis (IDA). Different earthquake types, including shallow crustal events, interface Cascadia subduction, and deep inslab subduction are considered. The median collapse capacities calculated using different record selection methods including Conditional Mean Spectrum (CMS)-based, Uniform Hazard Spectrum (UHS)-based, and epsilon-based methods are compared. The use of the epsilon-based method generally resulted in the highest collapse capacity predictions, but the CMS-based method was less sensitive to the number of records considered in the IDA.     

Development of Damage Patterns and Fragility Curves in Brick-nogging Buildings from the Thabeikkyin Earthquake,Myanmar, 2012

The Thabeikkyin earthquake (moment magnitude scale of 6.8) occurred on November 11, 2012; its epicenter was located 25 km from Thabeikkyin Township, Mandalay Region, Myanmar. Many buildings were damaged severely during the earthquake. In this study, damage patterns of brick-nogging buildings were firstly developed, and damage grades were characterized to allow for easy classification of the damaged buildings. The damaged data of all building types in the surveyed areas were collected by classifying the four damage levels as no damage, slight damage, moderate damage, and heavy damage. To develop the damage patterns of brick-nogging buildings, damage categories were arranged into three damage grades (slight, moderate, and heavy damage). Secondly, a questionnaire survey was conducted to calculate the seismic intensities of the affected areas. Medvedev–Sponheuer–Karnik (MSK) seismic intensities for the surveyed areas were estimated by analyzing the questionnaire survey responses. Finally, fragility curves for brick-nogging buildings were constructed using the estimated seismic intensities from the survey responses combined with the damage levels. These fragility curves may be useful to assess damage to brick-nogging buildings and to predict the number of damaged buildings in future earthquakes.     

Numerical Simulation and Seismic Fragility Analysis of a Self-Centering Steel MRF with Web Friction Devices

This article presents the seismic fragility analysis of a self-centering steel moment-resisting frame (SC-MRF) with web friction devices. A detailed numerical model of the SC frame was developed using the Open System for Earthquake Engineering Simulation (OpenSees) and the elastoplastic responses of the SC-MRF were studied, including the strength degradation under cyclic loading, tendon rupture, beam buckling, bolt bearing and friction loss, etc. The proposed simulation approach is validated by comparing the simulated results with those in existing hybrid-simulation tests, quasi-static pushover test and low cyclic tests, where good agreement is observed. In addition to the well-established performance limit states (i.e., immediate occupancy, collapse prevention and global dynamic instability), two unique performance limit states (i.e., the recentering and repairable limit states) are defined for the SC-MRF. Finally, incremental dynamic analyses are conducted to evaluate the seismic fragilities regarding the five performance limit states.     

Design Methodology for Seismic Upgrading of Substandard Reinforced Concrete Structures

This article presents a design methodology for seismic upgrading of existing reinforced concrete (RC) buildings. The methodology is based on the modification of the deflected shape of the structure so as to achieve a near-uniform distribution of interstorey drift along the building height, thereby eliminating damage localization. Yield Point Spectra are utilized for the definition of demand and a direct displacement-based design approach is implemented. The fundamental steps of the method are described in detail, including a systematic evaluation of assumptions and limitations. A full-scale tested structure is used as a case study for assessment and verification of the proposed methodology. Alternative retrofit scenarios are set according to target response and performance levels. The role of the target deflected response shape and its influence on the outcome of the retrofit strategy is investigated. The viability of the alternative retrofit scenarios is studied for different ground motions including near-fault earthquake records.     

故宫太和殿动力特性与常遇地震响应

为更好地保护故宫太和殿,采用有限元分析方法,研究了太和殿的动力特性及常遇地震作用下的响应。采用弹簧单元模拟榫卯节点及斗拱构造,并考虑柱础为铰接,建立了太和殿有限元模型。通过模态分析,获得了太和殿基频及主振型;通过对模型进行时程分析,获得了典型节点的位移、加速度响应曲线,以及典型单元的内力响应曲线,评价了太和殿的抗震性能。结果表明:太和殿基频为0.9Hz,主振型以平动为主;常遇地震作用下,太和殿能保持稳定振动状态,结构的内力和变形均在容许范围内,且斗拱及榫卯节点均能发挥一定的减震作用。     

METHODOLOGY FOR THE PROBABILISTIC ASSESSMENT OF q FACTORS. A DAMAGE INDEX APPROACH

The objective of the present work is to present a methodology for the identification of relevant limit states, namely ultimate limit states leading to structural collapse, and for the assessment of design q factors (or force reduction factors) for reinforced concrete structures under seismic loading. It follows a probabilistic approach based on damage indices. The utilised nonlinear models, as well as the damage indices, which are those proposed by Miner and by Park and Ang, are.described. The methodology of analysis is presented emphasising its probabilistic characteristics. Some parametric studies are carried out, including the analysis of one regular plane frame reinforced concrete structure, designed for three different ductility classes (those proposed by Eurocode 8) and assuming different q factors in design. Results show how the chosen damage indices can be used as parameters to characterise the structural response and how the proposed methodology can be used to assess the design q factors. It is also shown that, for moderate seismic input, the three ductility classes are essentially equivalent in terms of maximum damage indices, but that for higher seismic levels the differences are evident, justifying the use of different q factors.     

Real-time Seismic Damage Detection of Concrete Shear Walls Using Artificial Neural Networks

Concrete shear walls are widely employed in buildings as a main resistance system against lateral loads. Early identification of seismic damage to concrete shear walls is vital for deciding post-earthquake occupancy in these structures. In this article, a method based on artificial neural networks for real-time identification of seismic damage to concrete shear walls was proposed. Inter-story drifts and plastic hinge rotation of concrete walls were used as the inputs and outputs of a MLP neural network. Modal Pushover Analysis was employed to prepare well-distributed data sets for training the neural network. The proposed method was applied to a five-story concrete shear wall building. The results from the network were compared with those obtained from Nonlinear Time History Analysis. It was observed that the trained neural network successfully detected damage to concrete shear walls and accurately estimated the severity of seismic-induced damage.     

Establishment of a Time-Varying Modified Kanai-Tajimi Non Stationary Stochastic Model of Seismic Records Based on the S-transform

This article investigates the time-varying characteristics of seismic records. Time-varying amplitude and energy spectrums are defined to reflect the time-frequency dependence, and a general formulation of the S-transform is introduced. The S-transform is tested with various window functions to analyse the Kobe seismic records. The results indicate that using a complex window function with properly adjusted parameters gives favorable outcomes. Analyses of three soil sites show that sites with hard soil feature seismic records with shorter stationary durations, higher frequency centers, and broader frequency bands than other soil sites. The average time-varying spectrums of the seismic records are simulated using a uniform non stationary stochastic model and a time-varying modified non stationary Kanai-Tajimi stochastic model. Empirical formulas are established for the time-varying spectrums of the earthquake records from these sites by nonlinearly fitting stochastic models to the record data. The values of the time-varying spectrum factors for different earthquake intensities and sites agreeing with the Chinese Seismic Code are obtained. Based on these analyses and observations, we propose using the solutions to the stochastic models to simulate non stationary ground motions.     

Reconnaissance Report on Damage of Bridges in 2008 Wenchuan,China, Earthquake

This is a reconnaissance report on the damage to bridges during the 2008 Wenchuan, China, earthquake. Site investigation was conducted by the authors on August 10–14, 2008. Presented is a detailed discussion of the damage to 12 bridges as well as possible damage mechanisms. Characteristics of two near-field ground accelerations and Chinese seismic bridge design practices are also presented. An investigation of the damage finds insufficient intensity of seismic design force, inadequate structural detailing for enhancing the ductility capacity, and an absence of unseating prevention devices.     

An Applied Method for General Regional Seismic Loss Assessment—With A Case Study in Los Angeles County

We describe the formulation and application of an integrated general regional seismic loss assessment (RSLA) method for buildings in seismic regions. An efficient method for RSLA is valuable for engineers involved in city planning, risk management, and insurance dealings. In contrast to previously reported methods, the framework presented herein is hazard-based and utilizes a regional rapid seismic hazard deaggregation tool that allows regional assessment to be conducted more efficiently. The proposed technique is implemented as an example to assess general regional seismic loss in Los Angeles County for a ground motion hazard with 10% probability of exceedance in 50 years.