A Second Investigation into the Chemical Composition of the Roman Provincial (Procuratorial) Coinage of Judaea,AD 6–66*

An investigation of the chemical composition of the first Roman provincial coinage of Judaea, minted in ad 6–66, was conducted. A total of 103 copper‐alloy coins were analysed by ICP‐AES. It was determined that different copper alloys were used for the coinage, a leaded tin‐bronze and a pure tin‐bronze alloy. The investigation also showed that the copper alloy was made in four different formulae with regard to the alloying elements added to copper. Trace element profiles point to the existence of a shared pool of metal for Roman coins and metalwork.     

东周青铜复合剑制作技术研究

东周时期,吴越出现了一种奇特的青铜复合剑,剑的中脊和两刃是用两种不同成分的青铜铸接而成。为充分了解青铜复合剑的制作,对上海博物馆馆藏的4把青铜复合剑残剑进行了分析,通过X-射线荧光能谱仪分析残剑的剑刃和剑脊的成分,金相显微镜分析剑刃和剑脊的组织,发现中国古代工匠采用低锡青铜制作韧性好的剑脊,高锡青铜制作强度和硬度高的剑从,通过榫卯结构以铸接法将剑脊与剑从结合成一体,得到刚柔兼具的青铜复合剑。在测试分析的基础上进行模拟实验,先以陶范铸造法铸造出两侧带榫头的青铜剑脊,剑脊的成分采用88％铜、10％锡、2％铅的低锡青铜;然后将青铜剑脊置入铸造剑从的陶范内,两侧的榫头伸入陶范型腔中,剑从的成分采用78％铜、20％锡、2％铅的高锡青铜,当剑从凝固时产生的收缩使剑脊和剑从牢固地结合成整体,再分1次或多次以铸接法铸上剑格、剑茎、剑箍和剑首,成功地复制了青铜复合剑,再现了东周时期青铜复合剑的制作工艺。     

CHEMICAL COMPOSITIONS OF TEN SEPTIMIUS SEVERUS DENARII

X-ray fluorescence analyses of ten Septimius Severus denarii, all having the catalog number Cohen 777, and all minted in a.d. 196, show the following: (1) copper and silver concentrations in the ten coins cover a rather broad range, (2) lead and gold concentrations correlate with the silver concentrations, (3) no elements, except silver, correlate directly with the copper contents, (4) two coins have very nearly the same compositions, but this could actually be explained by chance, given the precision of the analyses and the range of compositions found for all ten denarii, (5) weights, thicknesses, and diameters of the coins varied over a relatively wide range, but densities varied only slightly. Assuming reasonably homogeneous melts of coinage alloy, X-ray fluorescence (XRF) analyses of many more Severus denarii of a.d. 196 should enable one to deduce several details of the mint operation such as (1) the number of dies in use of C. 777 coins at one time, (2) the overall batch size of coins, and (3) the number of different Severus denarii minted from the same batch of alloy. With improved precision of XRF analyses now possible, it only remains for a source of Severus denarii to be found to enable testing of this hypothesis.     

重庆忠县洞天堡墓地出土西汉青铜钫的腐蚀研究

为了解重庆洞天堡墓地出土青铜器的保存状况、腐蚀产物种类和埋藏环境特征等,并探索其锈蚀成因,为即将进行的保护修复工作提供科学的依据,利用三维视频显微镜、激光共聚焦拉曼光谱仪和扫描电子显微镜等对重庆忠县洞天堡墓地出土青铜钫残片进行微观形貌观察和锈蚀物结构成分分析,并利用X射线荧光和微生物分析技术对青铜钫附着土壤进行成分和微生物分析。结果表明:该青铜钫锈蚀物含孔雀石、白铅矿、铅钒、磷氯铅矿、砷铅矿和赤铜矿等;外层锈蚀存在磷和氯元素富集现象;土壤中的磷、硫和氯等元素向青铜器迁移,青铜器中铜、锡和铅元素因腐蚀向土壤中流失;附着土富含多种真菌类微生物,促进了磷氯铅矿和砷铅矿的形成。     

Did China Import Metals from Africa in the Bronze Age?

The origins of the copper, tin and lead for China's rich Bronze Age cultures are a major topic in archaeological research, with significant contributions being made by archaeological fieldwork, archaeometallurgical investigations and geochemical considerations. Here, we investigate a recent claim that the greater part of the Shang‐period metalwork was made using metals from Africa, imported together with the necessary know‐how to produce tin bronze. A brief review of the current status of lead isotopic study on Shang‐period bronze artefacts is provided first, clarifying a few key issues involved in this discussion. It is then shown that there is no archaeological or isotopic basis for bulk metal transfer between Africa and China during the Shang period, and that the copper and lead in Shang bronze with a strongly radiogenic signature is not likely to be from Africa. We call for collaborative interdisciplinary research to address the vexing question of the Shang period's metal sources, focusing on smelting sites in geologically defined potential source regions and casting workshops identified at a number of Shang settlements.     

A Trial PIXE/PIGME analysis of Pre-Islamic Arabian Coinage

Eight previously published (1) pre-Islamic coins minted in Arabia were subjected to non-destructive ion beam analysis by Proton Induced X-Ray (PIXE) and Gamma-Ray Emission (PIGME) at Lucas Heights. The results (2) were interpreted using Principal Components Analysis (PCA). The relative X-ray intensities of fifteen elements, supplemented with additional L alpha lines for two of the elements, were extracted for this analysis. PCA (results appended) was first carried out on the whole dataset where the distinctive high iron and nickel composition of two coins (331 and 335) resulted in their position as outliers. A second analysis of the subset of silver coins showed the compositional similarity between four coins (44, 222, 226, 359) and distinguished two separate outliers. One of these (369) has a high lead and tin content while the other (354) has a greater proportion of elements present as impurities (?) including iron and nickel. The two outliers and the relatively homogenous compositions of the group of four coins suggest that three compositional types of silver coinage are represented in the dataset: 1. a relatively silver-rich group of four coins; 2. silver coins debased with lead; and 3. silver coins debased with iron and nickel.     

COPPER AND BRONZE DURING THE ENEOLITHIC AND EARLY BRONZE AGE: A METALLOGRAPHIC EXAMINATION OF AXES FROM THE NORTHALPINE REGION*

This paper presents the results of a metallographic examination of Eneolithic and Early Bronze Age axes from the Northalpine region of central Europe. During this period, different types of copper were in use: arsenical copper, Fahlerz copper and tin bronze. We examine if and to what extent the different properties of the metals used were known to prehistoric metalworkers and actively manipulated in the production of the axes. The development of methods of casting and smithing is discussed. Both aspects contribute to our understanding of the nature of prehistoric technological change. During the Early Bronze Age of the Northalpine region, different traditions of early metallurgy can be identified, which differ in their use of Fahlerz copper, their attitude towards tin alloying and the use made of tin bronze in the production of the axes. These traditions can only be adequately described by reference to both composition—that is, access to different types of copper as well as tin—and knowledge of the production techniques provided by metallographic data.     

The key role of zinc,tin and lead in copper-base objects from medieval Talgar in Kazakhstan

Metallurgical examination of brass and bronze objects from the medieval (AD 9th–13th century) site at Talgar in Kazakhstan shows that they were mostly cast from the quaternary copper–zinc–tin–lead system with some exceptions that were forged from binary copper–zinc alloys. Evidence is found that brass was produced in the cementation process and that the addition of tin and lead to the parent brass was considered beneficial in casting but was strictly avoided in forging. The mutual effect of zinc, tin and lead for better casting and the advantages of the binary copper–zinc alloys in forging seem to have been the major factors driving the establishment of this unique brass tradition in a society with probably limited access to tin.     

AN ELEMENTAL AND LEAD‐ISOTOPIC STUDY ON BRONZE HELMETS FROM ROYAL TOMB NO. 1004 IN YIN RUINS

Lead isotope and element composition analyses were performed by thermal ionization mass spectrometry (TIMS) and inductively coupled plasma optical emission spectroscopy (ICP–OES) on bronze helmets from royal tomb No. 1004 at Yin Ruins, the last capital of China's Shang Dynasty (17th to 11th centuries bc ). The data show that the copper‐based alloy helmets can be divided into two categories: tin bronze and leaded tin bronze; and the lead isotope ratios for both categories are in the range of highly radiogenic lead (HRL). This result offers some important clues to answering questions concerning the provenance of raw metal materials, as well as the chronology of this famous royal tomb.     

The early roman imperial AES coinage II: Tracing the copper sources by analysis of lead and copper isotopes—copper coins of Augustus and Tiberius*

Lead and copper isotopes of Roman Imperial copper coins (denominations as and quadrans) were analysed by MC–ICP–MS. We concentrated on well‐dated coins minted at the official mint of Rome under the Emperors Augustus and Tiberius (between 16 bc and ad 37). The lead isotope results were compared with published lead isotope data of ore bodies from the Aegaean, Cyprus, Italy and Spain, in order to fingerprint the sources of Roman copper. During the Augustan period the main copper supply, as judged from the copper coins, is from Sardinia and south‐east Spain, with minor contributions from Tuscany. Except for Tuscany, this continued into the Tiberian period, when Cypriot copper also appears. Augustan quadrantes and late Tiberian asses came solely from the Rio Tinto area in south‐west Spain. Copper isotopes were applied here for the first time to systematic archaeometric studies. They are supplementary to lead isotopes and allow further grouping and classification of the copper coins.     

海盐镇海塔及出土文物

海盐镇海塔创建于元末。本文介绍了镇海塔的建造经过与历史沿革、建筑结构及特点,并就镇海塔及地宫的年代问题,作一初步探讨。镇海塔内共出有金、银、铜、铁、铅、玉、水晶、瓷、木、纸等各种材质的文物47件(组)和近370枚古钱币,品类十分丰富。其中比较特别的是多件宋元时期的青铜器,型式多样,造型精美。     

The Composition and Microstructural Variation of the Bronze Age Metal Ornaments from Lower Silesia (South‐West Poland): Chemical Analytical and Archaeological Aspects

Metal ornaments from Únětice (Mierczyce, Tomice, Jordanów and Opatowice) and Urnfield culture (Szprotawa, ?arek and Wroc?aw ?erniki) sites in south‐west Poland are made of bronze of varying composition, with the exception of the early Bronze Age Przec?awice site, where the copper items are found in graves from stages III/IV. The combined XRF and electron microprobe study of 37 ornaments (mostly pins) shows that those excavated from Únětice culture graves usually consist of cored dendrites, plus a Sb‐rich phase in some. The copper objects from Przec?awice correspond in composition to the East Alpine Copper or to the Ösenring copper and were produced from fahlore. Those from the Urnfield culture sites consist of homogeneous bronze. The Únětice culture ornaments were produced with little control of the effect of varying bronze composition on its microstructure. The results of XRF analyses of heterogeneous metal artefacts vary depending on the proportion of phases in the analysed site, and should be combined with micrometre‐scale analytical data and microstructural information yielded by electron microprobe methods. The same refers to deeply weathered or corroded objects made of homogeneous metal, which contain irregularly dispersed decomposition products.     

Synchrotron radiation-based x-ray analysis of bronze artifacts from an Iron Age site in the Judean Hills

Seven bronze bangles from Tell en-Nasbeh, northern Judah, were investigated to understand the phase composition and manufacturing process of the artifacts, and possibly suggest a provenance for their origin. Synchrotron x-ray radiation diffraction (XRD) and fluorescence (XRF) were used in the analysis to avoid any destructive sampling and at the same time penetrate through the surface into the core metal. These techniques enabled us to determine that the bangles were not just tin bronze, but leaded tin bronze. Based on excavation reports, it is unlikely that the metal objects were manufactured locally at Tell en-Nasbeh; rather, preliminary XRD and XRF data point towards the neighboring region of Edom as their origin. Despite their political enmity during the Iron Age II, the data suggest that Judahite social demands for bronze may have fostered a strong economic relationship between these two polities.     

Fuel Efficiency of Ancient Copper Alloys: Theoretical Melting Thermodynamics of Copper,Tin and Arsenical Copper and Timber Conservation in the Bronze Age Levant*

The melting of pure or alloyed copper, tin and arsenical copper ingots or recycled objects was a drain on the timber and dung fuel resources of many cultures. This paper suggests formulae grounded in thermodynamic principles in an attempt to estimate the energy requirements necessary to melt copper alloys common to both Old and New World cultures, with the goal of identifying consumption and conservation patterns. It has been suggested that tin bronze metallurgy was first adopted in the Levant during the Early Bronze Age (EB) IV, at the onset of the Late Holocene climate episode (c.2300–2000 bc ), becoming the most desired alloy by the Middle Bronze Age (MB) II (2000–1530 bc ) due to the ease of melting tin. To test this hypothesis, the formulae are applied here to all published Levantine EB IV – MB II copper alloys. Fuel conservation rates are proposed based on the thermodynamic formulae. Tin bronze is demonstrably more fuel efficient than pure copper. Due to the inherent difficulties in predicting the behaviour of arsenical copper compounds, it is suggested that melting experiments with representative alloys are conducted to further test and refine these energy relationships.     

Bronze technology of the ancient megalithic communities in the Vidarbha region of India

Metallographic examination was carried out on forty-nine copper and bronze objects from five megalithic sites located in Vidarbha, India. The artifact assembly consists of horse ornaments, kitchenware, bangles, rings, small bells and the hilt of an iron dagger. Results show that the technology involved is characterized by the use of bronze alloys containing approximately 10% tin based on weight and the application of forging as a key method of fabrication. No deliberate addition of lead was observed. Arsenic was detected, but very rarely and only as an insignificant minor element. The consistent selection of such specific alloys indicates that the megalithic communities in this particular region had established a fully developed and standardized bronze tradition optimized for the production of forged items. Their advanced technological status was also noted in a special technique applied to two forged high-tin bronze bowls. Such a unique bronze tradition, dedicated to sheet metal technology, was most likely a practical choice made by these people to take advantage of the changing role of bronze. Specifically, with the introduction of iron, bronze seems to have become a more prestigious material that could serve as an indicator of the appearance of a more rigid socio-economic stratification within the megalithic communities of the Vidarbha region.     

汉代铸造铸钱金属范之陶范的分析研究

汉代的铸钱遗址中出土了大量铸造铸钱金属范的阳文陶范,阳文陶范既反映出了铸造金属范时的铸型,又可看出所铸造的铸钱金属范的铸型.为揭示铸钱金属范的铸造工艺及变迁,本工作从铸造工艺角度对阳文陶范进行分析,通过对汉代阳文陶范出土概况的统计,了解了阳文陶范铸型的变迁.以西安相家巷和窝头寨铸钱遗址采集的阳文陶范为基础,对陶范的面层与背层进行了X射线荧光成分分析,在电子探针下对型腔面进行了形貌和成分分析.分析结果表明,阳文陶范分层制作的原因是为了将模上的钱币铭文和形状清晰地复印到陶范上,型腔面的检测不能表明是否使用了表面涂料.     

Iron Age tin bronze metallurgy at Marlik,Northern Iran: an analytical investigation

The archaeological excavations performed in 1961 and 1962 at the necropolis of Marlik (Gilan District, northern Iran) revealed important archaeological remains dating to Iron Age I and II periods (late second/early first millennium BCE). While the metal collection from Marlik includes various gold, silver and bronze objects and is considered one of the most significant finds of metal objects from the prehistoric Iran, the technological investigations discussed in this paper provide information on tin bronze objects only from Marlik. Both the composition and the microstructure of 25 copper alloy objects have been determined in order to achieve a better understanding of the metallurgical processes used in northern Iran from the second to the first millennium BCE. Experimental analyses were carried out using inductively coupled plasma mass spectrometry (ICP-MS), scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM-EDS) and optical microscopy. The results demonstrated that the copper-base objects were made of the binary copper–tin alloy with variable tin contents. Other elements such as As, Ni, Pb, Zn and Sb were detected in minor/trace amounts. Variable tin content may be due to the application of an uncontrolled procedure to produce bronze alloy (e.g. co-smelting or cementation). Microscopic observations and microanalyses revealed the presence of numerous copper sulphide inclusions, lead globules and intermetallic phases scattered in the bronze solid solution. The microstructures seen in the bronze objects under study were varied and included worked/annealed or dendritic grain structures.     

TECHNOLOGY AND PROVENANCE OF A COLLECTION OF ISLAMIC COPPER‐BASED OBJECTS AS FOUND BY CHEMICAL AND LEAD ISOTOPE ANALYSIS*

Chemical and lead isotope analyses were utilized to determine the composition, technology and origin of a collection of Islamic copper‐based objects found in Jordan. The atomic absorption spectrometry results show that the objects were made of different types of copper‐base alloys that contain various amounts of zinc, tin and lead. The use of brass, highly leaded brass and quaternary alloys of Cu‐Zn‐Sn‐Pb in the manufacture of everyday, household objects strongly points to Islamic traditions. The lead isotope compositions of the objects match very well that of the copper ore mined from the Dolomite‐Limestone‐Shale unit of the Arabah copper mines.     

A TECHNOLOGICAL EXAMINATION OF NINTH–TENTH CENTURY AD ABBASID BLUE‐AND‐WHITE WARE FROM IRAQ,AND ITS COMPARISON WITH EIGHTH CENTURY AD CHINESE BLUE‐AND‐WHITE SANCAI WARE*

Eight sherds of ninth–tenth century ad Abbaesid blue‐and‐white glazed earthenware, excavated in 1931 at Hira in western Iraq, were analysed using, variously, quantitative wavelength‐dispersive spectrometry (WDS) and energy‐dispersive spectrometry (EDS) in association with scanning electron microscopes (SEM), and semi‐quantitative X‐ray fluorescence spectrometry (XRF). In order to compare the compositions of the cobalt pigments used, the glazes of seven complete vessels of eighth century ad Chinese Tang blue‐and‐white sancai were also analysed semi‐quantitatively using XRF. The Abbasid wares were shown to have used traditional Mesopotamian alkali–lime glazes applied to calcareous clay bodies. Half the glazes examined were opacified with tin oxide. Three types of blue decoration (i.e., raised; spreading; and flat, non‐spreading) were produced using a variety of formulations, including a mixture of cobalt pigment with lead oxide. The sources of the ores used for the cobalt pigments have not been identified. However, the analytical data showed that the cobalt ore used for the Abbasid blue‐and‐white ware could be distinguished from that used for the Tang blue‐and‐white sancai by its higher iron content and by the presence of a significant amount of zinc. The use of cobalt‐blue decoration on the ninth–tenth century ad Abbasid ware was anticipated in China by eighth century ad Tang blue‐and‐white sancai wares. However, whether its introduction by the Abbasid potters should be seen as an independent invention that followed the introduction of tin‐opacified glazes in Iraq, or whether it was influenced in some way by Chinese originals, is still unresolved.     

古铜镜“水银沁”表面形成机理的研究

对加工纯铜、黄铜、锡青铜和铸造高锡镜青铜样品的基体及“磨镜药”处理前后表面进行检测,发现在磨镜处理时,“磨镜药”中的Sn原子通过Hg的作用首先以置换方式扩散渗入铜材表面的α固溶体中,当Sn元素浓度达到饱和时,将首先在晶体缺陷处生成Cu41Sn11新相并逐渐长大,使表面形成“水银沁”富锡层。富锡层逐渐氧化生成致密的、显微晶态的SnO2膜。此即古铜镜“水银沁”表面的形成机理。